APART MASK4 Manuale utente

MASK4(T) & MASK6(T)

Instruction manual

Instruction manualMASK4(T) / 6(T)

1

MASK4(T) & MASK6(T) Manual

2

Cabinet loudspeakers

Introduction

Please read this manual carefully before using the product. This

will give you the necessary product and installation instructions to

assure a seamless installation and non-compromised overall sound

quality.

Thank you for purchasing loudspeakers of the MASK series.

We proudly present our iconic 2 way speakers, with their timeless

typical APART design that will ﬁt into any of your projects.

The paintable and weather resistant design also makes this speaker

perfect for outdoor applications.

The loudspeakers have a unique protection circuit which will protect

the integrity of the speaker when needed and is visualized with a

led on the front side of the speaker.

Ease of installation has always been very important to us. With

great pride we present the INTELLI-MOUNT snap-on system for safe

and reliable mounting at minimal effort when installing.

Instruction manualMASK4(T) / 6(T)

3

Safety instructions

• Keep this manual for future reference.

• Take care of your speaker wires, they should be free of damage.

Damaged speaker wires may result in poor sound quality and

can damage ampliﬁers.

• No main power shall be connected to the speakers, doing so

will damage the speaker.

• This speaker should only be serviced by qualiﬁed personnel. If

not, warranty might be void.

• Use cables of the right gauge, certainly for long runs.

• Use cables with clear color indication and maintain polarity

throughout the whole system.

• Avoid loud feedback for this is a main speaker killer.

• Clean only with dry cloth.

• Do not operate near heaters or place it on other apparatus

which produce a lot of heat.

• Only use accessories speciﬁed by the manufacturer.

• Make sure the mounting surface can easily support the

speaker’s weight.

• Use only industry-accepted rigging tools and methods.

• Use sufﬁcient loudspeakers and avoid death spots.

• Being exposed to loud levels over a long time can cause severe

hearing loss.

4

Cabinet loudspeakers

• timeless design

• weather resistant

• INTELLI-MOUNT snap-on system with lockable rotating ball for

safe and reliable mounting

• wall and ceiling mountable

• unique overload protection

• asymmetric tweeter horn design

• a 4.25” LF driver for MASK4 and a 6.5” LF driver for MASK6

• paintable in any RAL color

• 70 W power handling for MASK4(T) and 200 W for MASK6(T)

Features and beneﬁts

• Don’t forget to consult the local law directions regarding

producing sound in public places.

• Please check the unit’s condition after unpacking. If the outside

of the carton box has been damaged, inform your shipper

immediately.

Instruction manualMASK4(T) / 6(T)

5

Mounting the speaker

1. Before mounting the base plate to the wall, test-ﬁt the speaker-

bracket combination to see if you can reach the desired

mounting angle. Determine the position of the mounting holes

using the base plate as a template and drill the holes.

2. Keep in mind: minimum distance to ceiling for MASK4 is

45 mm and for MASK6 90 mm.

3. Place the shaft / ball to the snap-on plate and secure it with the

XXL nut. After this screw the butterﬂy nut on the shaft / ball.

4. Thread the assembled snap-on unit onto your MASK speaker as

The intelligent mounting system helps you to install the MASK4(T)

and MASK6(T) speaker in a safe and easy way.

butterﬂy

nut

XXL

nut

shaft / ball snap-on

plate

base

plate

6

Cabinet loudspeakers

Connecting the speaker

The connectors can be found behind the rubber IP64 Protection

cover. The cables are connected with “push-terminals”.

far as it goes and tighten it ﬁrmly. Screw the butterﬂy nut to the

MASK speaker to secure it.

5. Select the desired voltage tap setting on the speaker. (MASK4T

and MASK6T only)

6. Hook the snap-on-plate into the base plate, insert the security

screw and tighten.

7. Position the loudspeaker correctly so that it is pointed to the

correct place in the room (remembering the 5% internal down

tilt of the speakers) and tighten the XXL-nut.

Instruction manualMASK4(T) / 6(T)

7

Mind the polarity marked on the back of the speaker: + is positive, -

is negative. Most speaker wires have a color code. Respect the color

code starting at your ampliﬁer up to your speakers.

For distances up to 20 meters, you can use 0.75 mm² speaker wire

without any loss of performance. For longer distances, use thicker

wire.

After connecting the speaker wires, use the power selector on the

back to select the correct power setting. This is only applicable

for MASK4T and MASK6T. For low impedance applications select

the 16 Ohm position. Otherwise chose one of the following 100V

power positions.

MASK4T: 2.5 W, 5 W, 10 W, 20 W

MASK6T: 6 W, 15 W, 30 W, 60 W

Once the speaker is connected and in position, place the rubber

protection cover to shield the speaker connections from external

elements.

8

Cabinet loudspeakers

16Ω

4Ω4Ω

16 Ω technology

16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω

60W

100 V technology

60W 30W 30W 30W 15W 6W 6W

total = 237 watts speakerline for 240 watts / 100 V ampliﬁer

• dynamic high power

• stereo Hi-Fi quality

• same volume in all zones

• max 8 cabinets on a stereo Hi-Fi ampliﬁer

• different volume settings in all zones

• more than 8 cabinets on a stereo Hi-Fi ampliﬁer

• Easy installation

.....

Questo manuale è adatto per i seguenti modelli

3

Indice

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP

HP GL313AA - USB Speakers PC Multimedia Manuale utente