Apera Instruments LabSen 211 Manuale utente

LabSen 211 Routine pH Electrode

User Manual

LabSen electrochemical sensors are premium pH electrode with manufacturing technology and key

components imported from Switzerland. LabSen 211 routine pH electrode is suitable for routine use,

especially suitable for high-precision pH measurement of scientific research and quality control.

This probe has following features:

Impact-resist membrane (see the right picture), there is no danger of electrode

breakage during normal use.

Blue gel inner solution, does not flow and will not cause bubble.

Long life reference system, has better stability and service life.

1 Technical Data

Measuring Range

(0-14) pH

Electrolyte

3M KCl

Temperature Range

(-5~100)°C

Soaking Solution

3M KCl

Shaft Material

Lead-free Glass

Electrode Dimension

(Ø12×120) mm

Membrane Shape

Half Ball

Connector

BNC

Reference

Long Life

Cable

Ø3×1m

Junction

Ceramic

2 Usage and Maintenance

2.1 Connect BNC plug to the input on the pH meter.

2.2 When measuring, please unscrew the sleeve cap, pull out the electrode and rinse it with

deionized or distilled water. After using, please put the electrode back into the bottle and screw

tight the cap.

2.3 Prior to measurement, remove the rubber plug to maintain pressure of the reference solution,

keep consistent flow rate of reference solution and stable potentials of junction.

2.4 After a period of usage, the reference solution will running low. Whenever the level falls to 1/2

height of the electrode, add 3M KCL solution to the refilling hole by using syringe or pipette.

2.5 The connector of the electrode should be kept clean and dry. If being contaminated, please

clean it with medical cotton and absolute alcohol and blow dry to prevent the short circuit of the

electrode and slow reaction of electrode.

Before pulling out or putting back the electrode, make

sure to fully loosen the blue cap on the storage sleeve so

that the electrode can move in and out smoothly.

2.6 The electrode’s measuring tip should be soaked in the storage sleeve containing 3M KCL

storage solution to keep the membrane hydrated and junction unblocked. Clean the sleeve and

replace the storage solution if the storage solution gets turbid or mildewed. The electrode should

never be soaked in purified water or buffer solution for long.

2.7 Please avoid measuring dehydrated medium like strong acid or alkaline solution, absolute ethyl

alcohol and concentrated sulfric acid. In case of measuring such solution, please try to reduce

the immersion time and clean it carefully after use.

2.8 After 1-year of use, we recommend replacing the electrode for best accuracy.

3 Limited Warranty

We warrant this electrode to be free from defects in material and workmanship and agrees to repair

or replace free of charge, at option of APERA INSTRUMENTS (Europe) GmbH, any malfunctioned

or damaged product attributable to responsibility of APERA INSTRUMENTS for a period of six

months. Warranty period is the time limit to provide free service for the products purchased by

customers, not the service life of the tester or electrodes.

This limited warranty does not cover any damages due to:

I. transportation;

II. storage;

III. improper use;

IV. failure to follow the product instructions or to perform any preventive maintenance;

V. modifications;

VI. combination or use with any products, materials, processes, systems or other matter not

provided or authorized in writing by us;

VII. unauthorized repair;

VIII. normal wear and tear; or

IX. external causes such as accidents, abuse, or other actions or events beyond our reasonable

control.

APERA INSTRUMENTS (Europe) GmbH

Wilhelm-Muthmann-Str. 15

42329 Wuppertal Germany

Tel.: +49 202 51988998

Email: [email protected]

www.aperainst.de

Indice

Altri manuali Apera Instruments Strumento di misura

Apera Instruments

Apera Instruments YD300 Manuale utente

Apera Instruments

Apera Instruments PH60-WW Manuale utente

Apera Instruments

Apera Instruments TN420 Manuale utente

Apera Instruments

Apera Instruments WS100 Manuale utente

Apera Instruments

Apera Instruments SX823-B Manuale utente

Apera Instruments

Apera Instruments LabSen 861 Manuale utente

Apera Instruments

Apera Instruments 800 Series Manuale utente

Apera Instruments

Apera Instruments 950 Series Manuale utente

Apera Instruments

Apera Instruments Gro Star AI102G Manuale utente

Apera Instruments

Apera Instruments SX716 Manuale utente

Apera Instruments

Apera Instruments LabSen 751 Manuale utente

Apera Instruments

Apera Instruments LabSen 821 Manuale utente

Apera Instruments

Apera Instruments 9500 Premium Series Manuale utente

Apera Instruments

Apera Instruments TN500 Manuale utente

Apera Instruments

Apera Instruments SX811-SS Manuale utente

Apera Instruments

Apera Instruments WS100 Manuale utente

Apera Instruments

Apera Instruments SX751 Manuale utente

Apera Instruments

Apera Instruments SX725 Manuale utente

Apera Instruments

Apera Instruments SX716 Manuale utente

Apera Instruments

Apera Instruments EC700 Manuale utente

Apera Instruments

Apera Instruments DO8500 Manuale utente

Apera Instruments

Apera Instruments SX610 Manuale utente

Apera Instruments

Apera Instruments WS200 Manuale utente

Apera Instruments

Apera Instruments LabSen 241-3SP Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente