Apera Instruments PH60Z-PW Manuale utente







|





ISO 9001: 2015



 V2.1





ATTENTION



NEVER use the product when it’s freezing cold. Let it warm to room temperature

before using.



NEVER use your nger to touch the pH glass membrane or use other materials to

rub it. Doing so could generate static electricity and cause measurement errors. To

remove extra water on electrode, just shake it o or blot dry with Kimwipe or clean

tissues.



HandlethepHelectrodewithcare.It is made of glass, and will break if dropped

or bumped against hard objects.

 

 

 

 

 

























®







Search “zentest” in Apple App Store or Google Play App Store to download the

latest App for your meter. Make sure the Bluetooth of your phone is turned on, then

go to ZenTest App, tap on the upper right corner, then select your meter to

connect (NOT the Demo device).

The content of this user mnual focus on how to operate through the meter's keypad.

For the guides on how to use the ZenTest App to achieve more functions, please

refer to the video tutorials by scanning the QR code below.









ShortPress — 1 second LongPress — 3 seconds

• When turned o, short press to turn on the tester; long press to

enter parameter setting.

• In calibration mode or parameter setting, short press to return to

measurement mode.

• In measurement mode, long press to turn o the tester, short press

to turn on/o backlight.

• In measurement mode, long press to turn on/off Bluetooth®

receiver. When it's turned on, will be flashing; when it's

connected to smartphone, will stay on.

• In parameter settings, short press to change parameter (Uni-

directional).

• Long press to enter calibration mode.

• In calibration mode, short press to conrm calibration.

• In measurement mode, when Automatic Hold is turned off, short

press to manually lock or unlock readings; when Automatic Hold is

triggerd, short press to unlock the reading.















































  















 



 





4.1.4 Wait for the reading to stabilize (when stays on the screen), then short press

again to nish the rst point calibration (pressing too early could lead

to Er2 error). "7.00" will be ickering and the meter will return to measurement

mode. Icon (the middle point) will appear at the bottom left, indicating a

successful 1-point calibration.

4.1.5 To calibrate the 2nd point, rinse o the electrode with pure water and remove

excess water. Dip the electrode into pH 10.01 solution and repeat Step 4.1.3 to

4.1.4. "10.01" will be ickering and (the high point) will show up next to

, indicating a successful 2-point calibration.

4.1.6 To calibrate the 3rd point, rinse o the electrode with pure water and remove

excess water. Dip the electrode into pH 4.00 solution and make a quick stir, then

repeat Step 4.1.3 to 4.1.4. "4.00" will be flickering and (the low point) will

display next to and , indicating a successful 3-point calibration.

4.2 NotesaboutCalibration

4.2.1 Always start calibrating with pH 7.00 first. Perform the 2nd and 3rd point

calibration immediately after the 1st point is finished. Do NOT turn off the

meter before you calibrate the second or third point. Otherwise, after you

restart the meter and perform calibration in pH 4.00 or pH 10.01, Er1 error

will be generated and you will have to calibrate with pH 7.00 again. For more

troubleshooting tips with calibration, refer to Section 14.





4.3HowOftentoCalibratetheElectrode?

The frequency that you need to calibrate your pH Electrode depends on many factors such

as the nature of test samples, condition of electrodes, and the requirement of the accuracy.

For high-accuracy measurements (≤ ±0.02pH), the electrode should be calibrated before

every test; For general-accuracy measurements (≥ ±0.1 pH), calibrate the electrode every 1-2

weeks.

Inthefollowingcases,theelectrodemustbere-calibrated:

• The electrode hasn’t been used for a long time or a dierent electrode is connected.

• After measuring strong acid (pH<2) or strong base (pH>12) solutions.

• After measuring uoride-containing solution and strong organic solution.

• There is a significant temperature difference between the test sample and the buffer

solution.

    

   





















  

















  















  

































5.1HowtoTakepHMeasurement

5.1.1 Short press to power on. Remove the storage

sleeve and rinse the electrode in distilled/

deionized water, then shake o the excess.

5.1.2 Submerge the electrode into your sample solution

at least 1 inch deep, make a quick stir and hold

still. Record the reading as the pH measurement

when it is stabilized ( comes up and stays on

screen).







Soak the electrode in pH 4.00 calibration solution for half a minute



  









 

5.3TipstoGetMoreAccuratepHMeasurementofPureWater

When testing pure water like tap/drinking/well/RO/distilled/deionized water, it will

take longer for the readings to get fully stabilized (typically 2-5 minutes). Pure water

is susceptible to the influence of CO2 in the air. If you leave the electrode in pure

water for too long, its pH will be slowly changing. Here are some tips to minimize

this interference:

• Use a closed system — Minimize the time that the water sample is exposed to the

air before and during the pH measurement. Use a lid or cover on top of the water

sample and make a hole to insert the electrode for testing when possible.

• Use a degassed sample — Before measurement, degas the water by boiling it for

a few minutes. Boiling will drive o most of the dissolved gases, including CO2.

After boiling, quickly cool the water under an inert atmosphere (like nitrogen or

argon) to prevent the re-dissolution of CO2 and then measure the pH immediately.





6.1 Themeterisonlyasaccurateastheelectrodeisclean.Always thoroughly rinse o

the electrode before and after each measurement with distilled water in a container

or with a wash bottle. To remove excessive water, just shake them o or blot dry

with Kimwipe or lint-free cloth. Neverrub the glass membrane of the electrode.

Otherwise static electricity will be generated and cause measurement error.

6.2 For tough contaminants stuck on electrode, use a soft brush and warm soapy water to

clean them o; If not working well, soak the electrode in the Apera electrode cleaning

solution (SKU: AI1166) for 30 to 60 minutes, and use a soft brush to remove the

contaminants. After the cleaning, soak the electrode in the 3M KCL solution for 12 to 24

hours, then perform a 2 to 3 point calibration before taking a new pH measurement.



 







 







 









Symbol Parameter Setting Contents Content Factory

Default

P1 Temperature Unit ˚C – ˚F ˚F

P2 Automatic Hold 5-20 seconds – O O

P3 Automatic Backlight O 1-8 minutes – O 1

P4 Automatic Power O 10-20 minutes – O 10

P5 pH Buer Series Selection USA – NIST USA

P6 pH Resolution 0.1 – 0.01 0.01

P7 pH Calibration Reminder H-hours D-Days

(set up in ZenTest App) /

P8 Back to factory default No – Yes No

Indice

Altri manuali Apera Instruments Strumento di misura

Apera Instruments

Apera Instruments SX610 Manuale utente

Apera Instruments

Apera Instruments SX716 Manuale utente

Apera Instruments

Apera Instruments LabSen 851-H Manuale utente

Apera Instruments

Apera Instruments 2401T-F Manuale utente

Apera Instruments

Apera Instruments LabSen 753 Manuale utente

Apera Instruments

Apera Instruments LabSen 763 Manuale utente

Apera Instruments

Apera Instruments SX736 Manuale utente

Apera Instruments

Apera Instruments Gro Star AI104G Manuale utente

Apera Instruments

Apera Instruments GroStar AI101G Manuale utente

Apera Instruments

Apera Instruments YD300 Manuale di istruzioni

Apera Instruments

Apera Instruments PH60-WW Manuale utente

Apera Instruments

Apera Instruments PH 8500 Manuale utente

Apera Instruments

Apera Instruments Gro Star AI102G Manuale utente

Apera Instruments

Apera Instruments LabSen 551 Manuale utente

Apera Instruments

Apera Instruments WS200 Manuale utente

Apera Instruments

Apera Instruments PH400 Manuale utente

Apera Instruments

Apera Instruments PHB-3 Manuale utente

Apera Instruments

Apera Instruments PH60 Manuale utente

Apera Instruments

Apera Instruments WS100 Manuale utente

Apera Instruments

Apera Instruments TN420 Manuale utente

Apera Instruments

Apera Instruments PH910 Manuale utente

Apera Instruments

Apera Instruments LabSen 823 Manuale utente

Apera Instruments

Apera Instruments SX731 Manuale utente

Apera Instruments

Apera Instruments LabSen 861 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente