Aqara T1 Manuale utente

Single Switch Module T1 (No Neutral) Quick Start Guide

󲊓󹝻󹝻󹠁󴝘󲛦󽘘󵎢󱙆󳘮󶬢󽘙󳗐󸷀󱮧󹝭󳬘󱻣

Einzelschaltmodul T1 (ohne Neutrallinie) Schnellstartanleitung

Guide de démarrage rapide de Single Switch Module T1 (No Neutral)

Guía de inicio rápido de módulo de interruptor único T1 (sin neutro) 44

Guida Rapida dell’Avviamento Modulo Switch Singolare T1

(senza cavo neutro)





󽘘󽘙



Product Introduction

Aqara Single Switch Module T1 (No Neutral) is based on the Zigbee 3.0 wireless





work with other Aqara smart devices to realize more smart scenes.

* This device requires a compatible Zigbee 3.0 hub.











Connect to Network







Indicator Light

Button

Antenna

Warnings





Do not cover when the plug is working.



Do not connect in series.





Do NOT use in humid environments or outdoors.



Do NOT place this product near a heat source. Do NOT place it in an enclosure











losses.

Installation



installation!













Method 1: L1 is connected to the load wire. S0 and S1 are connected to the two







connected to S0, and the other end is connected to the live wire. L is connected to



the original switch, which is connected to the load wire, can be connected to S0 to



Diagram 1





  







Diagram 2 Diagram 3





  





  



2. 



3. 





touch it, and replace or repair it in time.







Quick Setup

1. 

app downloaded and the Aqara Hub installed.

4. Turn on the main power switch, and press the button on the module or on the















on the ceiling or inside the lights, the antenna should avoid too much shielding.



damaged.

Indicator Light Description

2. Please open the app, tap “Home” and then tap “+” in the top right corner to



Neutral)”, and add it according to instructions.











Indicator Light Status Status Description

 Device power on

 Zigbee network is connecting

Blue light keeps on 

 



Specifications



Dimensions: 42.9 × 40 × 21.4 mm（）





（）





Online Customer Service: www.aqara.com/support









 Zigbee network is not connected

Altri manuali per T1

Indice

Lingue:

Altri manuali Aqara Unità di controllo

Aqara

Aqara Hub Manuale utente

Aqara

Aqara Hub E1 Manuale utente

Aqara

Aqara T1 Manuale utente

Aqara

Aqara SSM-U02 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente