ARGON18 E-118 TRI+ Disc 315A Manuale utente
E-118 TRI+ Disc 315A ASSEMBLY GUIDE
Valid for MY2020 E-118 Tri+ Disc 315A
PRELIMINARY VERSION - 02.13.2020
2
For the warranty to be valid, the bicycle must be fully assembled by an authorized Argon 18 dealer. High end components,
particularly carbon parts, need extra care when assembled. These components must be installed using a calibrated torque
wrench to make sure every bolt is at the right torque setting to prevent damage.
E-118 TRI+ Disc 315A Table of Contents
My E-118 Tri+ Disc
Date of purchase:
Retailler:
Size:
Serial Number:
1. Tools Needed & First Aid Kit .......................................... 3
2. Frame Inspection .................................................... 4
3. Troubleshooting / Tips / Specication................................. 5
4. Frameset Parts’ SKUs & Descriptions.................................. 6
5. Seat Post Clamp Installation .......................................... 9
6. Seat Post Installation................................................10
7. Rear Derailleur Hanger Adjustment ..................................12
8. Fork & Headset Installation .........................................13
9. Cable & Housing Routing............................................15
10. Handlebar Installation .............................................20
11. Saddle Adjustment ................................................27
12. Min/Max Seat Post Insertion .......................................28
3
Tools needed for assembly
1: Bearing Cup Press (Park Tool HHP-2)
2: Allen Key Set
3: Grease
4: Utility Pick Set (Park Tool Item # UP-SET)
5: Clean Rags
6: Derailleur Hanger Alignment Gauge (Park Tool Item # DAG-2,2)
7: Cables and Housing Cutter
8: Carbon Paste
9: Loctite #242 or #243
10: Torque Wrench
First Aid Kit: Essential parts to always have on hand
IN CASE OF EMERGENCY…THIS MIGHT SAVE YOUR RIDE!
1: Spare rear dropout (SKU: 80832 for Direct Mount and 80802 for regular)
2: Spare brake pads corresponding to your caliper and disc model
3: Seat post clamp (SKU: 80423, 80422)
IMPORTANT: the E-118 Tri+ Disc’s seat post clamp is not the same as the Nitrogen Disc
E-118 TRI+ Disc 315A 1. Tools Needed & First Aid Kit
SKU: 80422
SKU: 80423
SKU: 80802SKU: 80832
4
E-118 TRI+ Disc 315A 2. Frame Inspection
Parts installed on the frame Description
Screw Torque Detail
type Nm
Rear derailleur hanger Screw (1)
4mm 2Nm Threadlocker
Bottle cage
Screw (4) 5mm 3Nm Grease
Bottom bracket cover Screw (2)
4mm 2.5Nm Grease
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts according to their
torque specications.
BEFORE ASSEMBLING YOUR NEW E-118 TRI+ DISC, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1. Brakes hoses, gears cables and housing set
2: Frameset parts checklist (see p.6-7-8)
3: All the necessary bolts (refer to Frameset Parts, p.6-7-8)
WHEN ASSEMBLING YOUR NEW E-118 TRI+ DISC, MAKE SURE YOU FOLLOW THIS PROCEDURE:
4: Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
5: For reference, check serial number and write it on p.2
6: For optimal shifting performance, use a dropout alignment gauge to make sure that the rear derailleur hanger is straight.
5
E-118 TRI+ Disc 315A 3. Troubleshooting / Tips / Specication
Brakes
Use only at mount hydraulic disc brakes. The frame and fork are compatible with either 140mm or 160mm disc rotors.
Adapters might be required, consult brake manufacturer.
• Rear mount thickness: 30mm
Tire Clearance
Compatibilities of standard tires with this bikes: 700x 28c (30mm) – Any tire/rim combination compatible.
Bottom Bracket
BB86 (Press-t)
Headset Bearings
Upper and lower bearings: MR054 (1 1/8 - 36/45), Argon18 SKU# 80476.
Armrests and Elbow Pads
E-118 Tri+ armrests and pads (SKU# 81129/81130) are compatible with E-119 Tri handlebars, and vice-versa.
E-119 Tri / E-119 Tri+ armrests and pads (SKU # 80077/80078/80080) are available separately.
Chainring Compatibilities
The frame is compatible with double-chainring cranksets having a big chainring of 50T up to 58T (or oval chainring equivalent to 58T).
Saddle Rails:
If your saddle rails are not round and made of metal, please refer to Ritchey’s part numbers. These replacement parts are not sold by Argon 18
but available on Ritchey’s website (ritcheylogic.com).
COMPATIBLE WITH ELECTRONIC SHIFTING ONLY!
The E-118 Tri+ is not compatible with mechanical groupsets. It is optimised for Shimano Di2 and SRAM eTap AXS.
Please contact customer service for any further inquiries.
6
E-118 TRI+ Disc 315A 4. Frameset Parts’ SKUs & Descriptions
Images are for reference only.
Argon 18 reserves the right to modify/change parts of the frameset at any moment without prior notice.
80264
80802 80832
81130
38977 80061
80492
81003
80800
80295
80303
80308
80159
81125
80292
80293
81136
80811 80298
39000
SP.E117T.285A
80167
80551
80294
80301
80302
80306
80305
80304
80307
80296
38916
38912
80382
80299
38997 38998 38999
39001
XS / 81132
S / 81133
M / 81131
L / 81134
80476
38911
38915
81129
FK.E118T+_D.XS.315A
FK.E118T+_D.S.315A
FK.E118T+_D.M.315A
FK.E118T+_D.L.315A
8042380422
80164 80826 80804 80805
81124
81174 81135
81175 81128
81173
80813 80812
7
E-118 TRI+ Disc 315A 4. Frameset Parts’ SKUs & Descriptions*
*Except for the frame itself, which is not sold as a spare part, all parts can be ordered by referring to their respective SKU number.
No. Name A18 SKU# Qty
1.1 E-118 TRI+ FRAME NOT AVAILABLE AS SPARE PART 1
1.2 FRONT DERAILLEUR HANGER (RIVETED ON THE FRAME) NOT AVAILABLE AS SPARE PART 1
1.3.1 REAR DERAILLEUR HANGER STANDARD
80802 1 KIT1.3.2 REAR DROPOUT DS
1.3.3 REAR DERAILLEUR HANGER SCREW M4x12 FLAT HEAD
1.4 REAR DERAILLER HANGER DIRECT MOUNT 80832 1
1.5.1 BB CABLE COVER 80159 1 KIT
1.5.2 BB CABLE COVER SCREW M4x6
1.6.1 SEAT POST COLLAR BASE W. SCREW M8x12 80423 1
1.6.2 SEAT POST COLLAR WEDGE W. SCREW M3x8 80422 1
1.7 LONG PLUG 80804 1
1.8 LONG GROMMET DI2 80805 1
1.9 OBLONG HYDRAULIC BRAKE HOUSING GROMMET 80551 1
1.10 FD CABLE ENTRY GROMMET 80164 1
1.11 FD CABLE ENTRY PLUG 80826 1
1.12 WATER BOTTLE SCREW - M5x16 81003 4
1.13 PLASTIC PLUG M5 80264 3
2 E-118 TRI+ FORK ASSEMBLY
FK.E118T+_D.XS.315A
FK.E118T+_D.S.315A
FK.E118T+_D.M.315A
FK.E118T+_D.L.315A
1
2.1 FORK ROTATION BUMPER 81124 1
2.2 FLAT HEAD CAP SCREW FOR M6x35 FOR BASEBAR ASSEMBLY 81125 3
3 E-118 TRI+ SEATPOST ASSEMBLY (SAME AS E-117 TRI SEATPOST) SP.E117T.285A 1
3.1 SEATPOST HEAD (N/A IN SPARE PART; AVAILABLE AT RITCHEYLOGIC.COM) NOT AVAILABLE AS SPARE PART 1
3.2 DI2 BATTERY HOLDER FOR AERO SEATPOST 80167 1
4 HANDLEBAR ASSEMBLY 81173 1
4.1 HANDLEBAR COVER (INCLUDING M3 NYLON WASHER AND M3x6 SCREW) 81174 1 KIT
4.2 HANDLEBAR WEDGE 81128 1 KIT
4.3 CONSOLE RING DI2 80800 1
4.4 COVER CAP PLUG (INCLUDING O-RING) 81175 1 KIT
5.1 EXTENSION BARS (KIT OF 2) 80061 1 KIT
5.2 ARMREST (R AND L) 81129 1 KIT
5.3 ARMREST PADS (KIT OF 2) 81130 1 KIT
8
E-118 TRI+ Disc 315A 4. Frameset Parts’ SKUs & Descriptions
No. Name A18 SKU# Qty
5.4.1 SWIVEL LOWER BRACKET 38916 1
5.4.2 SWIVEL UPPER BRACKET 38915 1
5.4.3 SWIVEL SQUARE NUT 80382 2
5.4.4 SWIVEL SCREW (M6x12) 38911 2
5.5 5mm ARMREST SPACER 38997 2
5.6 10mm ARMREST SPACER 38998 2
5.7 20mm ARMREST SPACER 38999 2
5.8 40mm ARMREST SPACER 39000 2
5.9 70mm ARMREST SPACER 39001 2
5.10 MEDIUM SLEEVE NUT (30mm) 80292 4
5.11 SMALL SLEEVE NUT (24mm) 80293 4
5.12 LARGE SLEEVE NUT (44mm) 80294 4
5.13 X-LARGE SLEEVE NUT (74mm) 80295 4
5.14 EXTENSION CONNECTOR BASE 38912 2
5.15 EXTENSION CONNECTOR TOP PLATE 80296 1
5.16 DI2 END CAP 38977 2
5.17 FLAT HEAD HEX SCREW (M6x20) 80297 3
5.18 FLAT HEAD HEX SCREW (M5x10) 80298 4
5.19 FLAT HEAD HEX SCREW (M5x18) 80299 4
5.20 FLAT HEAD HEX SCREW (M5x12) 80300 4
5.21 SOCKET HEAD CAP SCREW (M5x25) 80301 4
5.22 SOCKET HEAD CAP SCREW (M5x15) 80302 4
5.23 SOCKET HEAD CAP SCREW (M5x35) 80303 4
5.24 FLAT HEAD HEX SCREW (M5x15) 80304 4
5.25 FLAT HEAD HEX SCREW (M5x25) 80305 4
5.26 FLAT HEAD HEX SCREW (M5x35) 80306 4
5.27 FLAT HEAD HEX SCREW (M5x45) 80307 4
5.28 FLAT HEAD HEX SCREW (M5x55) 80308 4
6
E-118 TRI+ STEERER MEDIUM
E-118 TRI+ STEERER X-SMALL
E-118 TRI+ STEERER SMALL
E-118 TRI+ STEERER LARGE
81131
81132
81133
81134
1
7 HEADSET BEARINGS (TOP AND BOTTOM) 80476 2
8 TRANSPORT COLLAR 81135 1
9 FRONT AXLE 80812 1
10 REAR AXLE WITH REMOVABLE HANDLE 80813 1
11 STEERER L-TOOL 32mm 81136 1
12 FOAM LINER FOR HYDRAULIC HOSE 80811 1
9
E-118 TRI+ Disc 315A 5. Seat Post Clamp Installation
1. Apply a drop of blue Threadlocker
(n. 242) on the bolt’s thread
2. Apply grease on the seat post clamp
and on the screws as shown
3. Assemble the seat post clamp with
the small screw, allowing the parts to
move freely
4. Place the seat post clamp inside the
frame, holding it to prevent it falling
inside the frame
5. Insert the seatpost (3), on which
some carbon ber assembly paste has
been applied
6. Position the seatpost to the desired
height
7. Tighten the set screw at max. 5.5Nm
IMPORTANT: The E-118 Tri+ Disc’s seat
clamp is not the same as the Nitrogen
GREASE
THREADLOCKER
BLUE (n. 242)
GREASE
CARBON FIBER
ASSEMBLY PASTE
5.5 Nm
Thighten lightly, then unscrew a
1/4 turn to keep the wedge free to
slide
1,5
1,6 THREADLOCKER
BLUE (n. 242)
10
E-118 TRI+ Disc 315A 6. Seat Post Installation
B
A
C
1. Unscrew main bolt (A) as far as
possible without fully removing it from
the lock nut.
2. Install the saddle rails into the
seatpost clamp (B).
3. Slide saddle clamp (B) onto rocker (C).
4. Tighten the bolt up at 12Nm.
See p.27 for saddle adjustment.
IMPORTANT:
The E-118 Tri+ Disc’s saddle rail clamp is
made for metal and round-shaped saddle
rails (For part numbers contact Ritchey).
For other types of saddle rails, please
refer to the Tips and Troubleshooting
section of this Assembly Guide (p.5).
12Nm
CARBON
FIBER
ASSEMBLY
PASTE
5Nm
5Nm
Indice
Altri manuali ARGON18 Bicicletta
ARGON18
ARGON18 E-119 TRI+ Manuale utente
ARGON18
ARGON18 KRYPTON PRO 302A Manuale utente
ARGON18
ARGON18 GALLIUM DISC 339A 2021 Manuale utente
ARGON18
ARGON18 Dark Matter Manuale utente
ARGON18
ARGON18 GALLIUM PRO 210A Manuale utente
ARGON18
ARGON18 E-119 TRI Manuale utente
ARGON18
ARGON18 E-118 NEXT Manuale utente
ARGON18
ARGON18 Road Race Manuale utente
ARGON18
ARGON18 KRYPTON 212A Manuale utente
ARGON18
ARGON18 E-118 NEXT Manuale utente
ARGON18
ARGON18 GALLIUM CS 281A Manuale utente
ARGON18
ARGON18 KRYPTON Manuale utente
ARGON18
ARGON18 Grey Matter Manuale utente
ARGON18
ARGON18 KRYPTON XROAD 213C Manuale utente
ARGON18
ARGON18 RADON 237A Manuale utente
ARGON18
ARGON18 GALLIUM PRO Manuale utente
ARGON18
ARGON18 E-116 Manuale utente
ARGON18
ARGON18 GALLIUM PRO 347A Manuale utente
ARGON18
ARGON18 ELECTRON PRO 245A Manuale utente
ARGON18
ARGON18 E-118 NEXT Manuale utente
