Arista O-235 Manuale utente

Quick Start Guide

O-235 Access Point

Arista Networks

www.arista.com

DOC-04356-01

and the Arista logo are trademarks of Arista Networks, Inc in the United States and other countries. Other product or service

names may be trademarks or service marks of others.

Headquarters

5453 Great America Parkway

Santa Clara, CA 95054

USA

408 547-5500

www.arista.com

Support

408547-5502

866 476-0000

support-wifi@arista.com

Sales

408 547-5501

866 497-0000

[email protected]

Chapter 1. About This Guide............................................................................................................3
Chapter 2. Package Content..............................................................................................................4
Chapter 3. Access Point Overview.....................................................................................................6
Front Panel..................................................................................................................................... 6
Side Panel.......................................................................................................................................7
Rear Panel...................................................................................................................................... 8
Chapter 4. Install the Access Point.................................................................................................11
Pole Mount the AP...................................................................................................................... 11
Power On the AP.........................................................................................................................16
Connect the AP to the Network.................................................................................................. 17
Connect the AP using PoE.................................................................................................. 17
Chapter 5. Access Point Troubleshooting....................................................................................... 19
Chapter 6. Appendix A: AP-Server Mutual Authentication........................................................20

Chapter 1. About This Guide

This installation guide explains how to deploy the O-235 access point (AP).

Important: Please read the EULA before installing O-235. You can download and read the

EULA from https://www.arista.com/en/support/product-documentation

Installation constitutes your acceptance of the terms and conditions of the EULA.

Intended Audience

This guide can be referred to by anyone who wants to install and configure the O-235 outdoor access

point.

Document Overview

This guide contains the following chapters:

•Package Content (page 4)

•O-235 Overview (page 6)

•Installing O-235 (page 11)

•Access Point Troubleshooting (page 19)

Note: All instances of the term 'server' in this document refer to the Wireless Manager, unless

the server name or type is explicitly stated.

Product and Documentation Updates

To receive important news on product updates, please visit our website at https://www.arista.com/

en/support/product-documentation. We continuously enhance our product documentation based on

customer feedback.

This equipment conforms to the requirements of the NCC.

Chapter 2. Package Content

The access point (AP) package must contain the components shown in the following figure.

Figure: Package Components

Table 1. Labels: Package Components

Label Description

1 O-235 Access Point

2 2 metal clamps for fixing the mounting bracket to the pole

O-235 | 2 - Package Content | 5

Label Description

3 Mounting bracket

4 4 steel bosses for fixing AP in the bracket

5 Philips screw to secure the AP to the bracket

6 Earthing screw fitted at the back of AP with dimension 6.8 ±0.2 mm

7 Philips #2 screwdriver to tighten the screw

8 Earthing screw - 2.6 ±0.2 mm

9 Earthing screw - 5.8 ±0.2 mm

10 Earthing screw thread - M4 × 0.5 mm

Important: The MAC address of the AP is printed on a label at the bottom of the product and

the packaging box. Note down the MAC address before mounting the AP.

If the package is not complete, please contact Arista Networks Technical Support Team at support-

[email protected] or return the package to the vendor or dealer where you purchased the product.

Chapter 3. Access Point Overview

The O-235 is a tri radio (4X4 5GHz, 2X2 2.4GHz, 2x2 Dual-band scan radio), Wi-Fi 6 access point.

This chapter provides an overview of the O-235 and describes the:

•Front Panel of the AP (page 6)

•Rear Panel of the AP (page 8)

•Side Panel of the AP (page 7)

Front Panel

The front panel of the O-235 has 6 LEDs that indicate the status of various device functions.

Figure: Front Panel LEDs

Table 2. Labels: Front Panel LEDs

Label Description

1 Power

2 2.4 GHz Radio

3 5 GHz Radio

4 Third Radio

O-235 | 3 - Access Point Overview | 7

Label Description

5 LAN1

6 LAN2

Power LED: The following table describes the Power LED states.

Table 3. Power LED States Description

Green Orange

Solid Running at full capability Running at reduced capability

Blinking Received IP address, but not connected to the server Did not receive an IP address

Reduced capability indicates that the AP is getting lower than the required maximum power from the

PoE+ switch, i.e., 802.3af instead of 802.3at.

LAN1 LED: ON when the corresponding interface is up.

LAN2 LED: ON when the corresponding interface is up and either wired guest or link aggregation is

configured.

Radio LEDs: ON when the corresponding radio is operational.

Side Panel

The side panel of the AP has a console port, a USB port, and a Reset pin.

Figure: Side Panel

Table 4. Labels: Side Panel

O-235 | 3 - Access Point Overview | 8

Label Description

1 Reset

2 USB

3 Console

Port Description Connector

Type Speed/Protocol

Console Establish ‘config shell’ terminal session via serial

connection

RJ-45

•RS 232 Serial (115200

bits per second)

•Data bits:8; Stop bits: 1

•Parity: None

•Flow Control: None

USB USB 2.0 port USB Future Use

Reset Reset to factory default settings port. Hold down and power

cycle the device to reset.

Pinhole push

button N/A

When you reset the AP, the following settings are reset:

•Config shell password is reset to config.

•Server discovery value is erased and changed to the default,

redirector.online.spectraguard.net (primary) and wifi-security-server (secondary).

•All the VLAN configurations are lost.

•If a static IP is configured on the AP, the IP address is erased and DHCP mode is set. The

factory default IP address of the AP is 169.254.11.74.

Rear Panel

The rear panel of the AP has LAN/PoE+ connectors that enable you to connect the AP to a wired

LAN through a switch or a hub. The ports provide power to the AP by using the 802.3at standard.

Use an active wrench to open the LAN cap.

Figure: O-235 Rear Panel

O-235 | 3 - Access Point Overview | 9

Table 5. Labels: Ports

Label Description

1 LAN1 (PoE+)

2 LAN2

3 Width of the LAN cap is 29 mm

4 Wrench to open the LAN cap

Indice

Altri manuali Arista Punto di accesso wireless

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente