ATCOM AT-640P Manuale utente

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ISSUE 1.0

20 11 -7- 28

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

1、Installation and access ................................................................................................................. 3

2、Configure

AT-640P

to make

VoIP

calls ....................................................................................... 4

A、WAN Config ............................................................................................................................... 4

B、SIP Config .................................................................................................................................. 5

C、IAX2 config ................................................................................................................................ 6

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

、

Installation

Installation and

and

and access

access

Installation:

Set up AT-640P as below:

If AT-640P is connect to your network. P ress Navigation button up or down to

get the WAN IP address .

Modify your computer

’

s IP address to the same network as AT-640P

K ey in AT-640P

’

s IP address in the web browser and press enter, then you

can access AT-640P

’

s web manage interface. R emember the account is

admin/admin for administrator and guest/guest for user .

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

、

Configure

Configure AT-640P

AT-640P

AT-640P to

to make

make

make VoIP

VoIP

VoIP calls

calls

、

WAN

WAN Config

Config

E nter

Network

Network �

�

�WAN

WAN

WAN Config

Config

to set the WAN setting :

AT-640P supports three different IP types: Static

IP,

Dynamic obtain IP (DHCP)

and PPPoE.

ou can use either of these IP types to connect the internet.

Use

Use Static

Static

Static IP:

IP:

---- Select “ S tatic ” ;

---- Enter the AT-640P

’

s IP address in the “ IP address ” field.

---- Set the “ Net mask

”

, default 255.255.255.0

---- Enter the AT-640P

’

s upper gateway IP address ( for example: Router ) in the

“ Gateway ” field

---- Key in the DNS information in the “ Primary DNS ” and

“

Alter DNS ” fields.

Use

Use DHCP:

DHCP:

---- Select DHCP

If you have a DHCP server in your network , AT-640P will automatically obtain

the network information from your DHCP server .

Use

Use PPPoE:

PPPoE:

---- Select PPPoE

---- Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server

( option), Username and password.

T hen the AT-640P will connect to the internet through PPPoE, and automatically

obtain the IP address, Net mask , Gateway, Primary DNS and Alter DNS

information.

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

、

SIP

SIP Config

Config

E nter

VoIP

�

�SIP

SIP

SIP Config

Config

setting page and set the sip information

----Register

----Register Server

Server

Server Addr

Addr

Addr :sip server address;

----Register

----Register Server

Server

Server Port

Port

Port :sip se rver register port;

----Register

----Register Username

Username

Username :username of your sip account;

----Register

----Register Password

Password

Password :password of your sip account;

--- -Register

-Register

-Register Number

Number

Number :Phone number of your sip account; the same as username

if none

----

---

--- check

check

check Enable

Enable

Enable Register

T hen you can make VoIP calls if the WAN and SIP config is correct.

Notice:

Notice: Please go to the “ Config Manage ” and save the config, otherwise you will lose the setting

after device reboot.

AT-640P

Quick

Quick Start

Start

Start Guide

Guide

ATCOM TECHNOLOGY CO. , LIMITED

、

IAX2

IAX2 config

config

�

Above is the IAX server configuration page

�

IAX Server Addr: Register address of public IAX server

�IAX Server Port: Register port of public IAX server ，default port is 4569

�

Account Name: Username of your SIP account (Always the same as the

phone number)

�

Account Password: Password of your IAX account.

�

Local port: Signal port of local, default port is 4569

�

Phone Number: Phone number of your IAX account .

�

Voice mail number: If the IAX support voice mail, but your username of the

voice mail is letters which you cannot input with the ATA , then you use the

number to stand for your username .

�

Voice mail text: if IAX support voice mail, config the domain name of your

mail box here.

�

Echo test number: If the platform support echo test , and the number is test

form , the config the test number to replace the text format The echo test is

to test the error status of terminals and platform

�

Echo test text: echo test number in text format

�

Refresh time: IAX refresh time

�

Enable Register: enable or disable register

�

Enable G.729: Using G.729 speech coding mandatory consultations

Altri manuali per AT-640P

Indice

Manuali Telefono IP popolari di altre marche

Alcatel

Alcatel 4028 Manuale utente

Polycom

Polycom Polycom VVX 600 Manuale utente

Polycom

Polycom SoundPoint IP 450 Manuale utente

Cisco

Cisco SPA-500 Series Manuale utente

Polycom

Polycom SoundPoint IP 650 Manuale utente

Proximus

Proximus Maestro 3016 IP Manuale utente

Fanvil

Fanvil X4 Manuale utente

Cisco

Cisco 7962 Manuale utente

Snom

Snom 320 Manuale utente

Yealink

Yealink Yealink SIP-T46G Manuale utente

Avaya

Avaya 4625SW Manuale utente

Yealink

Yealink SIP-T52S Manuale utente

Nortel

Nortel 1140E Manuale utente

Nexotek

Nexotek NT-P500 Manuale utente

Avaya

Avaya Integral 5 R3.0 Manuale utente

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuale utente

Avaya

Avaya 4600 Series Manuale di servizio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuale utente