ATEN VE-120 Manuale utente

User Manual

VE-120

Read this guide thoroughly and follow the installation and operation

procedures carefully in order to prevent any damage to the units and/or

any devices that connect to them.

This package contains:

M1 VE-120L Video Extender (Local Unit)

M1 VE-120R Video Extender (Remote Unit)

M1 VGA Cable

M2 Power Adapters

M1 User Manual

If anything is damaged or missing, contact your dealer.

Manual Part No. PAPE - 1141-200

Printed in Taiwan 10/2003

2003-10-28

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device pursuant to Subpart

JofPart15ofFCCRules.Theselimitsare designedtoprovide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

MReorient or relocate the receiving antenna.

MIncrease the separation between the equipment and

receiver.

MConnect the equipment into an outlet on a circuit different

from that which the receiver is connected.

MConsult the dealer or an experienced radio/television

technician for help.

2003-10-28

Overview

The VE-120 Video Extender System allows you to extend the

distance between the computer system unit and the display

monitor by up to 130 meters (430 feet). It accomplishes this by

means of a local transmitting unit (VE-120L), and remote

receiving unit (VE-120R), connected by Category 5 twisted pair

Ethernet cable.

The VE-120 Video Extender System is ideal for factory and

construction sites, or any installation where the display needs

to reside in a harsh setting, but you want the system equipment

kept in an environmentally friendly location.

The Extender System is also useful for control and security

purposes, where you can have the system unit in a secure area

at the same time that you put the display in an area that is

convenient for viewing.

Other useful applications for the Video Extender system include:

Financial: The remote display of stock market information.

Education: The remote display of lectures and lessons to

lecture halls and classrooms.

Business: The remote display of addresses to overflow

rooms; video conferencing; and demos.

- 1 -

2003-10-28

Features

MUses economical, reliable, Category 5 Ethernet cable to

connect the local and remote units

MEasy installation - connecting cables is all it takes

MHigh resolution video - up to 1600 x 1200 @ 100m

MSupports VGA, SVGA, and Multisync Monitors

MLong distance transmission - up to 130m (430’)

System Requirements

MA PC compatible computer with a VGA output port

MA VGA, SVGA, or Multisync monitor

- 2 -

2003-10-28

Components

The Local Unit (VE-120L)

1. Range Switch

Slide the switch to the Long position if the Remote Unit is

located a long distance away; slide the switch to the Short

position if the Remote Unit is located a short distance away.

2. Remote I/O

The Category 5 twisted pair cable that connects to the

Remote Unit plugs in here.

3. AC 9V Power Jack

The AC 9V power adapter’s cable plugs in here.

4. Power LED

Lights to indicate that the unit is receiving power.

5. Monitor

The local monitor’s VGA cable plugs in here.

6. PC

The VGA cable (supplied with this package) that connects to

the computer’s VGA port plugs in here.

- 3 -

2003-10-28

The Remote Unit (VE-120R)

1. Remote I/O

The Category 5 twisted pair cable that connects to the

Remote Unit plugs in here.

2. AC 9V Power Jack

The AC 9V power adapter’s cable plugs in here.

3. Power LED

Lights to indicate that the unit is receiving power.

4. Monitor

The local monitor’s VGA cable plugs in here.

- 4 -

2003-10-28

Installation

Setting up the Video Extender System is simply a matter of

plugging in the cables. Refer to the diagram below as you

perform the following installation procedures. The numbers in

the diagram correspond to the numbers of the steps:

1. Plug the male end of the VGA cable (supplied with this

package) into the computer’s video output port; plug the

female end of the cable into the Local Unit’s PC port.

2. Plug the local monitor’s VGA cable into the Local Unit’s

Monitor port.

3. Plug one of the power adapters (supplied with this package)

into an AC source; plug the adapter’s power cable into the

Local Unit’s AC 9V Power Jack.

4. Slide the Local Unit’s Range Switch (see p. 3) to the Long

position if the Remote Unit location is a long distance away;

slide the switch to the Short position if the Remote Unit

location is a short distance away.

5. Plug either end of a Category 5 cable into the Local Unit’s

Remote I/O port; plug the other end of the Category 5 cable

into the Remote Unit’s I/O port.

Note: 1. Category 5 cable is not supplied with this package.

It requires a separate purchase. The cable can be

up to 130m long.

2. See the Cable Length table, p. 7, for typical

resolution/refresh rate/distance ratios.

- 5 -

1. Make sure that power to all the devices you will

be connecting up has been turned off. If your

computer has the Keyboard Power On function,

you must unplug its power cord.

2. To prevent damage to your installation, make sure

that all devices are properly grounded.

2003-10-28

6. Plug the remote monitor’s VGA cable into the Remote Unit’s

Monitor port.

7. Plug the second power adapter (supplied with this package)

into an AC source; plug the adapter’s power cable into the

Remote Unit’s Power Jack.

8. Power On the computer and monitors.

- 6 -

2003-10-28

Appendix

Cable Length Table

Resolution Distance (meters)

@ 60Hz @ 75Hz @ 85Hz

640 x 480 130 100

800 x 600 100

1024 x 768 100

1280 x 1024 100

1600 x 1200 100 80

TP Pin Assignments

Pin Assignment

1V OUT G

2/V OUT G

3V OUT B

4V OUT R

5/V OUT R

6/V OUT B

7GND

8GND

- 7 -

2003-10-28

TP Wiring Diagram

Troubleshooting

Symptom Action

No Video Make sure that all cables are securely plugged

into their sockets.

- 8 -

JACK POSITIONS

PAIR 2 PAIR 1

PAIR 3

PAIR 4

T568B

AT&T 258A

W-O W-GO G W-Br BrBl W-Bl

12345678

2003-10-28

Indice

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente