Atmel SMART ATBTLC1000 Manuale utente

ATBTLC1000 BluSDK

Phone Alert Status Profile - Getting Started Guide

USER GUIDE

Introduction

This getting started guide describes the setup of the Atmel®ATBTLC1000 with a supported platform

bringing-up an example profile supplied as part of BluSDK release. The Bluetooth®Phone Alert Status

Profile is an example application that is embedded as part of the software release package.

The Phone Alert Status profile (PAS) is used to obtain the Phone Alert Status exposed by the Phone Alert

Status service on a mobile device. Alert Status and Ringer Setting information of a mobile phone can be

received and modified by the Phone Alert Status service. The device can also use this profile to configure

ringer status on the mobile device.

This document explains the details about:

1. Getting started with the setup of supported platform to be used as a Phone Alert Client.

2. Getting the Phone Alert Status Application working on the above mentioned setup.

Features

Device Discovery and Disconnection

Pairing / Bonding

Phone Alert Status Alerts

Console Display

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

Table of Contents

1Demo Setup..................................................................................................................3

2Supported Hardware Platforms and IDEs ..................................................................3

3Hardware Setup ...........................................................................................................4

3.1 SAM L21 Xplained Pro Phone Alert Status Client Setup.......................................................................4

3.2 SAM D21 Xplained Pro Phone Alert Status Client Setup ......................................................................4

3.3 SAM G55 Xplained Pro Phone Alert Status Client Setup......................................................................5

3.4 SAM 4S Xplained Pro Phone Alert Status Client Setup ........................................................................5

4Phone Alert Status Notifications ................................................................................6

5Software Setup.............................................................................................................7

5.1 Installation Steps...................................................................................................................................7

5.2 Build Procedure.....................................................................................................................................7

6Console Logging .......................................................................................................10

7Running the Demo.....................................................................................................11

8BluSDK Software Architecture..................................................................................15

9ATMEL EVALUATION BOARD/KIT IMPORTANT NOTICE AND DISCLAIMER........16

10 Revision History ........................................................................................................17

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

1 Demo Setup

Figure 1-1. Demo Setup for Phone Alert Status

2 Supported Hardware Platforms and IDEs

Table 2-1. BluSDK –Supported Hardware and IDEs

Platform

MCU

Supported

BLE device

Supported evaluation kits

Supported IDEs

SAM L21 (MCU)

ATSAML21J18B

ATBTLC1000

ATBTLC1000-XSTK

(ATSAML21-XPRO-B + ATBTLC1000

XPRO)

Atmel Studio v7.0

SAM L21 (MCU)

ATSAML21J18A

ATBTLC1000

ATSAML21 XPRO + ATBTLC1000

XPRO

Atmel Studio v7.0

SAM D21 (MCU)

ATSAMD21J18A

ATBTLC1000

ATSAMD21-XPRO + ATBTLC1000

XPRO

Atmel Studio v7.0

SAM G55 (MCU)

ATSAMG55J19

ATBTLC1000

ATSAMG55-XPRO + ATBTLC1000

XPRO

Atmel Studio v7.0

SAM 4S (MCU)

ATSAM4SD32C

ATBTLC1000

ATSAM4S-XPRO + ATBTLC1000

XPRO

Atmel Studio v7.0

Android phone

Atmel Smart Connect app

(Phone Alert Status

Server)

ATBTLC1000+

Supported Atmel MCU

(Phone Alert Status

Client)

BLE Link

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

3 Hardware Setup

3.1 SAM L21 Xplained Pro Phone Alert Status Client Setup

Figure 3-1. ATBTLC1000 Xplained Pro Extension Connected to a SAM L21 Xplained Pro

3.2 SAM D21 Xplained Pro Phone Alert Status Client Setup

Figure 3-2. ATBTLC1000 Xplained Pro Extension Connected to a SAM D21 Xplained Pro

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

3.3 SAM G55 Xplained Pro Phone Alert Status Client Setup

Figure 3-3. ATBTLC1000 Xplained Pro Extension Connected to a SAM G55 Xplained Pro

3.4 SAM 4S Xplained Pro Phone Alert Status Client Setup

Figure 3-4. ATBTLC1000 Xplained Pro Extension Connected to a SAM 4S Xplained Pro

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

4 Phone Alert Status Notifications

The Profile defines two roles; the Phone Alert Server and the Phone Alert Client. The Phone Alert Server

is the device that originates the alerts and the Phone Alert Client is the device that receives the alerts and

alerts the user.

The Phone Alert Client which is a GATT client, is the configuration that’s implemented on the

ATBTLC1000 + along with supported platform.

The example application utilizes the SW0 button on the supported platform to demonstrate the notification

use-cases. A BLE compatible Android device running the Atmel Smart Connect mobile application

provides the Phone Alert Server (PAS Server) functionality in this example. On the application, once the

service is discovered and the user clicks on PAS service, notifications are enabled.

1. Post connection with mobile device, the first button press will set the PAS server to ‘Silent’ mode.

2. The second button press, the device will be set to ‘Mute’ State.

3. The third button press, will return the device back to ‘Normal’ Mode.

4. The fourth button press issues a ‘Read Characteristic’ request that will read the characteristics of

‘Alert Status’, ‘Ringer Settings’, and ‘Ringer Control Point’.

Note: iOS devices like iPhone®do not natively support Phone Alert Status profile. This demo/example

will work only with BLE compatible Android devices running the Atmel Smart Connect mobile

application.

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

5 Software Setup

5.1 Installation Steps

1. Atmel Studio installation [Atmel Studio 7.0 (build 594) Installer –with .NET]

http://www.atmel.com/tools/atmelstudio.aspx.

(Note: SAM L21 Rev B/SAM D21/SAM G55/SAM 4S part pack is built-in as part of Atmel Studio

7.0)

2. Atmel USB Driver Installer http://www.atmel.com/tools/atmelstudio.aspx.

3. Install the standalone ASF package from

http://www.atmel.com/tools/AVRSOFTWAREFRAMEWORK.aspx.

Note: Refer to the BluSDK release notes for updates to version numbers of the components mentioned

above.

This package will install the following examples within the Atmel Studio environment.

1. Blood Pressure Application for SAM L21.

2. Blood Pressure Application for SAM D21.

3. Blood Pressure Application for SAM G55.

4. Blood Pressure Application for SAM 4S.

5.2 Build Procedure

The following procedure is explained for the SAM L21 application example. The same procedure is valid

for the case of all the other supported platforms as well.

Figure 5-1. Creating a New Project

1. Select “SAML,32-bit” in device family, enter “Phone Alert Status” in search window, and expand

Atmel Corp. Projects. The location and the name of the project can be selected in the respective

fields. Click OK.

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

Figure 5-2. Selecting the Phone Alert Status Application from Example Projects

2. Accept the license Agreement. The studio will generate the Phone Alert Status Server project for

SAM L21.

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

3. Build the solution.

Figure 5-3. Building the Phone Alert Status Application

4. Download the application via the USB to the SAM L21 board using the Device Programming option

available in Tools, as mentioned below.

Figure 5-4. Programing the SAML21

5. Inside device programming the user has to select the correct configuration for the device and finally

program the device by using program button.

ATBTLC1000 BluSDK Phone Alert Status–Getting Started Guide [USER GUIDE]

Atmel-42547C-ATBTLC1000-BluSDK-Phone-Alert-Status-Profile-Getting-Started-Guide_UserGuide_022016

Figure 5-5. Flashing the Phone Alert Status Application

6. Once the application is flashed the Phone Alert Status Client Application is ready for usage.

6 Console Logging

For the purpose of debugging, a logging interface had been implemented in the Phone Alert Status

Application.

The logging interface utilizes the same EDBG port that connects to supported platform. A serial port

monitor application (for example TeraTerm) shall be opened and attached to the corresponding COM port

enumerated on the PC by the device with a baud rate of 115200.

Indice

Altri manuali Atmel Hardware per computer

Atmel

Atmel AVR ISP Manuale utente

Atmel

Atmel ATSTK94 Istruzioni operative

Atmel

Atmel SAM9X25 Manuale utente

Atmel

Atmel ATAB-SPI-LPT Manuale utente

Atmel

Atmel SAMA5D3 Series-EK Manuale utente

Atmel

Atmel AVR XMEGA 8/16-bit High Performance Low Power Flash... Manuale utente

Atmel

Atmel ATWINC3400 Manuale utente

Atmel

Atmel ATSAMD21BLDC24V-STK Manuale utente

Atmel

Atmel AVR ATmega324PA Manuale utente

Atmel

Atmel ATAN0008 Manuale utente

Atmel

Atmel AT91CAP9-STK Manuale utente

Atmel

Atmel ATAK2270 Manuale utente

Atmel

Atmel SMART SAMA5D3 Series Manuale utente

Atmel

Atmel AT04357 RCB256RFR2-XPRO Manuale utente

Atmel

Atmel AVR AT90S8515-4 Manuale utente

Atmel

Atmel Diopsis 940HF Manuale utente

Atmel

Atmel ATAK5276-83 Istruzioni per l'installazione e il funzionamento

Atmel

Atmel STK501 Manuale utente

Atmel

Atmel ATSAMB11 BluSDK SMART Manuale utente

Atmel

Atmel ATF16V8B Manuale utente

Atmel

Atmel AT90USB162 Manuale utente

Atmel

Atmel AVR STK500 Manuale utente

Atmel

Atmel AT88CK109BK8 Manuale di installazione

Atmel

Atmel AT89C51SND1 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente