IMPORTANT SAFETY INSTRUCTION
READ ALLINSTRUCTIONS AND WARNINGS BEFORE USING THIS TOOL
Operator
COMMONSENSE AND CAUTION ARE FACTORSWHICH CANNOT BE BUILT INTO ANY
PRODUCT. THESE FACTORSMUST BE SUPPLIED BY THE OPERATOR PLEASE REMEMBER:
1. When using electric tools, machines ore equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, and personal
injury.
2. Keep work area clean. Cluttered areas invite injuries.
3. Consider workareaconditions. Do not use machines or power tools in damp, wet,
or poorly lit locations. Do not expose equipment to rain, keep work area well lit.
Do not use tools in the presence of flam gases or liquids
4. Keep children away, all children should be kept away from the work area
5. Guardagainst electric shock. Preventbody contact with grounded surfaces such as
pipes, radiators, ranges, and refrigeratorenclosures.
6. Stay alert. Never operateif you are tired.
7. Do not operatethe product if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexesmight be
impaired.
8. Do not wear loose clothing or jewelryas they can be caught in moving parts.
9. Wearrestrictive hair covering to contain long hair.
10. Use eye and ear protection. Always wear.
11. Keep proper footing and balance at all times.
12. Do not reach over or across running machines.
Beforeoperations
1. Be sure the switch is OFF when not in use and beforeplugging in.
2. Do not attempt to use inappropriate attachments in an attemptto exceed the
tool’scapacity. Approved accessories are available from the dealer or machine
maker.
3. Check for damaged parts beforeusing any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function.
4. Check for alignment and binding of all moving parts, brokenparts or mounting
fixturesand any other condition that may affect proper operation. Any part that is
damaged should be prop early repairedor replaced bya qualified technician.
PROGRAM
