AVANIT Smartmeter ES1 Manuale utente
DVB-S2 Messgerät
smartmeter ES1
User Manual
Version: 11.06.2019 –Englisch
Technical Details
2 smartmeter S30
Technical Details
smartmeter S30 3
Preface
Dear Customer,
Thank you for purchasing the digital DVB-S/C/T meter smartmeter ES1.
This user manual contains all the information required
to connect,
to operate,
to clean, and
to dispose of the device.
Please read the user manual carefully before you start using the meter.
Avanit GmbH
Am Sternbach 1
91477 Markt Bibart
Germany
Service Hotline: +49 (0) 7724 94 78 555
Telefax: +49 (0) 7724 94 78 333
E-Mail: service@smart-electronic.de
Internet: www.smart-electronic.de
© Avanit GmbH 2019
All rights, technical changes, errors as well as printing mistakes reserved. Any reproducing or copying of
the contents requires prior written permission from smart.
Technical Details
4 smartmeter S30
Table of Contents
1. Safety precautions
2. Main features
3. Front panel and functions
4. Operations and Management
5. Main menu operation description
5.1 Find
5.2 Spectrum
5.3 List
5.4 Edit satellite
5.5 Edit transponder .
5.6 Setup System
6. Update application system
7. Charge indicator
8. Technique specifications
9. Attachments
Brief introduction:
This type of digital satellite finder is a simple and convenient instrument to install
and adjust satellite dish. As digital satellite finder, it is necessary to input correspon-
ding satellite parameters, such as LO frequency of LNB, Down Frequency, symbol
rate, etc.
It can be used as an indicator to adjust satellite dish, feedhorn position and polari-
zing angle so that help the best dish installation.
Technical Details
smartmeter S30 5
1. Safety precautions
•Please read this user’s guide carefully, especially for the first time users.
•Do not touch the LCD display by hand.
•Do not place heavy items on the device.
•Keep this unit away from the heat, direct sunlight, strong mechanical vib-
ration, or dusty places. ·Clean the surface with a dry and soft cloth. Do not
pour any liquid to void serious injury.
•Keep the unit in a ventilated place.
•Please contact your supplier if any failure occurs.
•Operate properly per this user’s guide, otherwise any damage of the unit is
at the user’s risk.
•Specifications are subject to change and improvement without notice.
Please inquire of manufacturer if there’s any need after the usage.
Notice:
1. The battery is only applicable to the charger which supplied or appointed by the
manufacturer of this machine.
2. The charging time should be minimum 5 hours for the first time , and it should not
be charged over 12 hours after the first time.
3. The battery should be stored within a temperature range of 0 ℃to 40 ℃.
4. When stored for a long period , charger the battery at least once per month so as
to prevent over discharge .
5. Products placed for a long time to charge once every three months.
6. The battery is expendable.
Technical Details
6 smartmeter S30
2. Main features
1 - Support DVB-S, DVB-S2
2 - Support Spectrum Function
3 - Support 0/22KHz., DISEqC1.0 , UASLS
4 - Support Unicable LNB
5 - Build in highlight LED light
6 - Show the Signal Quality on Nixie Tube
7 - Build in buzzer
8 - Support to check the power cable automatically
9 - Support to reset to defaults
10 - LCD Screen shows signal strength quality, Power, MER, TP Type, FEC, BER,
etc.
11 - The unit of Signal power support dBm, dBμv.
12 - USB 2.0 for software update, backup satellite parameters
3. Front panel introduction and function description
Technical Details
smartmeter S30 7
1 Signal Input
2 DC input
3 USB port
4 Compass
5 Indicator
6 LCD
7 Nixie tube
8 LED switch
9 Buttons
10 Power Switch
4. Operations and Management
Power: It lights on when the power on
Change: It lights on when change the battery
22K: Indicate the 22K signal
18V: Indicate the 18V output for LNB
Lock: It lights on when the signal is locked
LED switch: Switch the highlight LED
Compass: Indicate the direction
MENU: Direct go to main menu
EXIT: Press this button to step back, or cancel current parameter modifying.
OK: Use this button to enter a submenu or save a new setting after adjustment; press it to
enter parameter setting.
Move cursor up/down/left/right, Page up/down, change the parameter settings.
MENU
EXIT
OK
Technical Details
8 smartmeter S30
5. Main menu operation description
When power on, the screen will display some information about software, then enter
to the main menu.
5.1 Find
In this menu, it is display the signal strength and quality according to the parameters
that user selected or edited, help user to adjust the dish.
The buzzer can be turned on or off by “Buzzer” item.
Move cursor to “S：Q：”and press [OK], it will display signal strength and quality
progress bar as below.
Satellite Name: Chinasat6B
Local Freq: 05150
Transponder Freq: 03840
Symbol Rate: 27500
Polarity: H
22K: OFF
DiSEqC1.0: LNB2
USALS: OFF
Buzzer: OFF
S: 57 % Q: 45 %
MAIN MENU
Setup
Sat
TP
Find
List
Spectrum
Technical Details
smartmeter S30 9
Set USALS parameter “ON”, press [OK] on this parameter to enter USALS function
as below:
Longitude: Satellite longitude.
Direction: Satellite direction
Move: To drive the motor to rotate dish antenna，press < / > to select east or west,
press [OK] once will rotate one step, press and hold will rotate continuously.
Goto: Rotate to the target automatically, press [OK] to execute
XX: Rotate dish antenna to corresponding satellite automatically
ZERO: Rotate to “0” scale
Set Limit：Set rotation limit, select “LEFT”, “RIGHT” or “CLEAR” and press [OK] to
execute.
E.g. rotate motor to an east direction angle, then select “EAST” and press [OK], this
angle location will be EAST rotation limit, motor will not be able to rotate over this
east limit. Select “CLEAR” to cancel limit.
Satellite Name: Chinasat6B
Local Freq: 05150
Transponder Freq: 03840
Symbol Rate: 27500
Polarity: H
22K: OFF
DiSEqC1.0: LNB2
USALS: OFF
Buzzer: OFF
S: 57 % Q: 45 %
Satellite Name: Chinasat6B
Local Freq: 05150
Transponder Freq: 03840
Symbol Rate: 27500
Polarity: H
22K: OFF
DiSEqC1.0: LNB2
USALS: OFF
Buzzer: OFF
S: 57 % Q: 45 %
Technical Details
10 smartmeter S30
5.2 Spectrum
In this menu, the strength of input signal will display in graphic mode.
Press < / > to move cursor, press Up / Down to change the range of signal strength
display, current frequency and signal strength is shown on top, press [OK] to pause.
5.3 List
5.3.1 Manual Check
Select the desired satellite and corresponding transponder, it will show the signal
detail information, include strength, quality, type, FEC and BER.
Chinasat6B
01 03840 (H) 27500
S: - 57%
Q: 45%
TYPE: DVB-S
FEC: 3/4
BER: 0.00E-00
Indice
