Instructions
READ THE FOLLOWING BEFORE ASSEMBLING YOUR
PRO 5' X 10' CNC MACHINE KIT
1. The machine assembly is broken down into 8 main sections, visible in the PDF bookmarks tab.
2. It is helpful to look through each section prior to beginning its assembly.
3. Each section begins with an image of the fully assembled component. If needed, refer to this as a reference while
completing individual assembly steps.
4. Each section will identify the parts and tools needed for those assembly steps, as well as which box contains those parts.
Identification of fasteners is easier if they are kept in their respective fastener bags.
5. Assembling the larger components, such as the base and optional leg kit, is made easier with two people. Though not
required, this can make the process more efficient.
6. Listed below are three types of notes you will see throughout the assembly instructions:
Section Note
Section notes can be used to denote when the section is configuration specific.
(ex: NEMA 23 vs NEMA 34 electronics)
Assembly Note
Assembly notes are used to call attention to certain parts of the assembly step. Pay attention to these as they provide
important information for a successful machine build.
Machine Configuration Options
Machine configuration notes will denote specific steps to follow if you purchased the optional Extended Gantry, Custom
Gantry Height, or Extended Z-Axis Travel.
Machine Revision
Machine revision notes will list any information that may have changed in a machine revision. A machine purchase date
will be given to help determine if these apply to your machine.
