Axiometrix Solutions Imc BUSDAQflex Manuale utente

imcTest & Measurement GmbH • Voltastr.5 • 13355Berlin • Germany

imc BUSDAQflex

Getting Started

Edition 7 - 2023-08-24

Page 2

Disclaimer of liability

The contents of this documentation have been carefully checked for consistency with the hardware and

software systems described. Nevertheless, it is impossible to completely rule out inconsistencies, so that

we decline to offer any guarantee of total conformity.

We reserve the right to make technical modifications of the systems.

This documentation is the intellectual property of imcTest & Measurement GmbH. imcTest &

Measurement GmbH reserves all rights to this documentation. The applicable provisions are stipulated in

the "imc Software License Agreement".

The software described in this document may only be used in accordance with the provisions of the "imc

Software License Agreement".

Open Source Software Licenses

Some components of imc products use software which is licensed under the GNU General Public License

(GPL). Details are available in the About dialog.

A list of the open source software licenses for the imc measurement devices is located on the

imcSTUDIO/imcWAVE/imcSTUDIO Monitor installation medium in the folder "Products\imc

DEVICES\OSS" or "Products\imc DEVICEcore\OSS" or "Products\imc STUDIO\OSS". If you wish to receive a

copy of the GPL sources used, please contact our Hotline.

Page 3

Notes regarding this document

This document is an excerpt from the manual of the device / the module.

This document provides important notes on using the device / the module. Safe working is conditional on

compliance with all safety measures and instructions provided. The manual is to be used as a kind of

reference book. You can skip the description of the modules you do not have.

Additionally, all accident prevention and general safety regulations pertinent to the location at which the

device is used must be adhered to.

These instructions exclusively describe the device, not how to operate it by means of the software!

If you have any questions as to whether you can set up the device / module in the intended environment,

please contact the imc hotline. The measurement system has been designed, manufactured and unit-

tested with all due care and in accordance with the safety regulations before delivery and has left the

factory in perfect condition. In order to maintain this condition and to ensure safe operation, the user

must observe the notes and warnings contained in this chapter and in the specific sections applicable to

the concrete device. Never use the device outside the specification.

This will protect you and prevent damage to the device.

Special notes

Warning

Warnings contain information that must be

observed to protect the user from harm or to

prevent damage to property.

Note

Notes denote useful additional information on a

particular topic.

Reference

A reference in this document is a reference in

the text to another text passage.

Page 4

Table of contents

1 General introduction ........................................................................................ 6

1.1 imc Customer Support / Hotline ......................................................................................... 6

1.2 Legal notices ........................................................................................................................ 6

1.3 Explanation of symbols ....................................................................................................... 9

1.4 Last changes in content .................................................................................................... 10

2 Safety ............................................................................................................. 11

3 Assembly and connection ............................................................................... 14

3.1 After unpacking... .............................................................................................................. 14

3.2 Before commissioning ...................................................................................................... 14

3.3 Notes on connecting ......................................................................................................... 15

3.3.1 Precautions for operation ................................................................................................................... 15

3.3.2 Supply ................................................................................................................................................. 15

3.3.3 Grounding, shielding ........................................................................................................................... 19

3.3.4 Fuses (polarity-inversion protection) .................................................................................................. 20

3.3.5 Batteries .............................................................................................................................................. 20

4 Maintenance and servicing ............................................................................. 21

4.1 Maintenance and servicing ............................................................................................... 21

4.2 Cleaning ............................................................................................................................. 21

4.3 Storage .............................................................................................................................. 21

4.4 Transport ........................................................................................................................... 21

5 Start of operation Software / Firmware .......................................................... 22

5.1 Installation - Software ....................................................................................................... 22

5.1.1 System requirements .......................................................................................................................... 22

5.2 Connect the device ........................................................................................................... 22

5.3 Connecting via LAN in three steps .................................................................................... 23

5.4 Firmware update ............................................................................................................... 26

6 Introduction ................................................................................................... 29

6.1 imc BUSDAQflex device series .......................................................................................... 29

6.2 Topology and Mounting ................................................................................................... 30

6.3 CAN Termination ............................................................................................................... 32

6.4 Device variants and options ............................................................................................. 33

7 Pin configuration ............................................................................................ 34

7.1 DSUB-15 ............................................................................................................................ 34

7.2 Metal connector - Handling .............................................................................................. 35

7.3 LEMO.0B (6-pin) CTRL socket ............................................................................................ 36

7.4 DSUB-9 pin configuration ................................................................................................. 37

7.4.1 Display ................................................................................................................................................. 37

7.4.2 GPS ...................................................................................................................................................... 37

7.5 Pin configuration of the fieldbusses ................................................................................. 38

7.5.1 CAN-Bus, CAN FD (DSUB-9) ................................................................................................................. 38

7.5.2 LIN-Bus (DSUB-9) ................................................................................................................................. 38

7.5.3 FlexRay-Bus (DSUB-9) ......................................................................................................................... 38

7.5.4 XCPoE (RJ45) ....................................................................................................................................... 39

Page 5

Table of contents

7.5.5 ARINC-Bus (DSUB-15) .......................................................................................................................... 40

7.5.6 PROFIBUS (DSUB-9) ............................................................................................................................. 41

7.5.7 PROFINET (RJ45).................................................................................................................................. 41

7.5.8 MVB-Bus (DSUB-9) ............................................................................................................................. 41

Index ................................................................................................................. 44

Page 6

Chapter 1 General introduction

1 General introduction

1.1 imc Customer Support / Hotline

If you have problems or questions, please contact our Customer Support/Hotline:

imcTest & Measurement GmbH

Hotline

(Germany):

+49 30 467090-26

E-Mail:

hotline@imc-tm.de

Internet:

https://www.imc-tm.com

International partners

For our international partners see https://www.imc-tm.com/imc-worldwide/.

Tip for ensuring quick processing of your questions:

If you contact us you would help us, if you know the serial number of your devices and the version info

of the software. This documentation should also be on hand.

The device's serial number appears on the nameplate.

The program version designation is available in the About-Dialog.

1.2 Legal notices

Quality Management

imcTest & Measurement GmbH holds DIN-EN-ISO-9001

certification since May 1995. You can download the CE

Certification, current certificates and information about the imc

quality system on our website:

https://www.imc-tm.com/quality-assurance/.

imc Warranty

Subject to the general terms and conditions of imcTest & Measurement GmbH.

Page 7

Legal notices

Liability restrictions

All specifications and notes in this document are subject to applicable standards and regulations, and

reflect the state of the art well as accumulated years of knowledge and experience. The contents of this

document have been carefully checked for consistency with the hardware and the software systems

described. Nevertheless, it is impossible to completely rule out inconsistencies, so that we decline to

offer any guarantee of total conformity. We reserve the right to make technical modifications of the

systems.

The manufacturer declines any liability for damage arising from:

failure to comply with the provided documentation,

inappropriate use of the equipment.

Please note that all properties described refer to a closed measurement system and not to its individual

slices.

Guarantee

Each device is subjected to a 24-hour "burn-in" before leaving imc. This procedure is capable of detecting

almost all cases of early failure. This does not, however, guarantee that a component will not fail after

longer operation. Therefore, all imc devices are granted liability for a period of two years. The condition

for this guarantee is that no alterations or modifications have been made to the device by the customer.

Unauthorized intervention in the device renders the guarantee null and void.

Notes on radio interference suppression

imc BUSDAQflex devices satisfy the EMC requirements for an use in industrial settings.

Any additional products connected to the product must satisfy the EMC requirements as specified by the

responsible authority (within Europe1) in Germany the BNetzA - "Bundesnetzagentur" (formerly BMPT-

Vfg. No. 1046/84 or No. 243/91) or EC Guidelines 2014/30/EU. All products which satisfy these

requirements must be appropriately marked by the manufacturer or display the CE certification marking.

Products not satisfying these requirements may only be used with special approval of the regulating body

in the country where operated.

All lines connected to the imc BUSDAQflex devices should not be longer than 30m and they should be

shielded and the shielding must be grounded.

Note

The EMC tests were carried out using shielded and grounded input and output cables with the

exception of the power cord. Observe this condition when designing your setup to ensure high

interference immunity and low jamming.

1 If you are located outside Europe, please refer the appropriate EMC standards used in the country of operation.

Page 8

Chapter 1 General introduction

Cables and leads

In order to comply with the value limits applicable to Class B devices according to part 15 of the FCC

regulations, all signal leads connected to the imc BUSDAQflex devices must be shielded.

Unless otherwise indicated, no connection leads may be long leads (<30m) as defined by the standard

IEC 61326-1. LAN-cables (RJ 45) and CAN-Buscables (DSUB-9) are excepted from this rule.

Only cables with suitable properties for the task (e.g. isolation for protection against electric shock) may

be used.

ElektroG, RoHS 2, WEEE, CE

The imcTest & Measurement GmbH is registered with the authority as follows:

WEEE Reg. No. DE 43368136

valid from 24.11.2005

Reference

https://www.imc-tm.com/elekrog-rohs-weee/ and https://www.imc-tm.com/ce-conformity/

FCC-Notice

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment on and off, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult our imc Hotline or an experienced technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this product that

are not expressly approved by imc may void the user's authority to operate this equipment.

Page 9

Explanation of symbols

1.3 Explanation of symbols

CE Conformity

see CE chapter 1.2

No household waste

Please do not dispose of the electrical/electronic device with household waste, but at the

appropriate collection points for electrical waste, see also chapter 1.2 .

Potential compensation

Connection for potential compensation

Grounding

Connection for grounding (general, without protective function)

Protective connection

Connection for the protective conductor or grounding with protective function

Attention! General danger zone!

This symbol indicates a dangerous situation;

Since there is insufficient space for indicating the rated quantity at the measuring inputs,

refer to this manual for the rated quantities of the measuring inputs before operation.

Attention! Injuries from hot surfaces!

Surfaces whose temperatures can exceed the limits under certain circumstances are

denoted by the symbol shown at left.

ESD-sensitive components (device/connector)

When handling unprotected circuit boards, take suitable measures to protect against ESD

(e.g. insert/remove ACC/CANFT-RESET).

Possibility of electric shock

The warning generally refers to high measurement voltages or signals at high potentials and

is located on devices suitable for such measurements. The device itself does not generate

dangerous voltages.

DC, Direct Current

Supply of the device via a DC voltage source (in the specified voltage range)

Page 10

Chapter 1 General introduction

RoHS of the PR China

The limits for hazardous substances in electrical/electronic equipment applicable in the PRC

are identical to those in the EU. The restrictions are complied with (see chapter 1.2 ). A

corresponding "China-RoHS" label is omitted for formal/economic reasons. Instead, the

number in the symbol indicates the number of years in which no hazardous substances are

released. (This is guaranteed by the absence of named substances).

Observe the documentation

Read the documentation before starting work and/or operating.

1.4 Last changes in content

Please help us to improve our documentation:

Which terms or descriptions are incomprehensible?

What additions and enhancements you suggest?

Where have material mistakes slipped in?

Which spelling, translation or typing errors have you found?

Responses and other feedback should be directed to the Hotline.

Amendments and bug-fix in Edition 7

Chapter

Amendment

GPS connection

Maximum current = 220 mA, i.e. the 5 V can be loaded with max. 220 mA

Amendments and bug-fix in Edition 6

Chapter

Amendment

Handling

In the last Edition 5 the content of this chapter was missing.

Amendments and bug-fix in Edition 5

General

Amendment

Symbols

Missing symbols added in chapter "Explanation of symbols".

Connecting via LAN

The dialog for configuring the IP address of the device also provides the IP address of

the PC. Thus, the first step was removed from the documentation, which presented

different possibilities in Windows to determine the IP address.

Technical Specs

We added a general introduction to this chapter.

Indice

Altri manuali Axiometrix Solutions Strumento di misura

Axiometrix Solutions

Axiometrix Solutions imc CAEMAX Dx Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente

Axiometrix Solutions imc BUSDAQflex Manuale utente

Manuali Strumento di misura popolari di altre marche