AXIOMTEK NA-0043A Manuale
NA-0043 Series
Hardware Installation Guide
For service person only
ii
Disclaimers
The information in this manual has been carefully checked and is believed to be
accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of
patents or other rights of third parties, which may result from its use.
AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in
this document. AXIOMTEK makes no commitment to update or to keep current the
information contained in this manual.
AXIOMTEK reserves the right to make improvements to this document and/or
product at any time and without notice.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of AXIOMTEK Co.,
Ltd.
Copyright 2005 by AXIOMTEK Co., Ltd.
All rights reserved.
Version A1 July 2005
Printed in Taiwan
iii
Safety Approvals
CE Marking
FCC Class A
FCC Compliance
This equipment has been tested and complies with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. If not installed and used in
accordance with proper instructions, this equipment might generate or
radiate radio frequency energy and cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measurers:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with
emission limits.
iv
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist strap
and place all electronic components in any static-shielded
devices. Most electronic components are sensitive to static
electrical charge.
2. Disconnect the power cords from the NA-0043 before making any
installation. Be sure both the system and the external devices are
turned OFF. Sudden surge of power could ruin sensitive
components. Make sure the NA-0043 is properly grounded.
3. Do not open the system’s top cover. If opening the cover for
maintenance is a must, only a trained technician is allowed to do
so. Integrated circuits on computer boards are sensitive to static
electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
9Before handling a board or integrated circuit, touch an unpainted
portion of the system unit chassis for a few seconds. This will help
to discharge any static electricity on your body.
9When handling boards and components, wear a wrist-grounding
strap, available from most electronic component stores.
Trademarks Acknowledgments
AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.
Other brand names and trademarks are the properties of their
respective owners.
v
Table of Contents
C h a p t e r 1........................................................................................1
1.1 General Description....................................................1
1.2 Standard Features......................................................3
1.3 System Specifications.................................................4
1.3.1 Hardware............................................................4
1.4 Dimensions.................................................................6
1.5 Front Panel Outlets.....................................................7
1.6 Rear Panel Outlets .....................................................8
1.7 Indications of Front Panel...........................................9
C h a p t e r 2 ...................................................................................11
2.1 Preinstallation Checklist ...........................................11
2.2 Setting up the appliance.......................................... 12
2.2.1 Removing and Replacing the Top Cover........ 12
2.2.2 Installing a memory module (DIMM)............... 12
2.2.3 Installing aATA66/100/133 hard drive ............ 12
2.2.4 Connectors & Jumpers ................................... 13
2.2.5 Installing Display Interface.............................. 15
2.2.6 Installing Serial Port Interface......................... 15
2.2.7 Installing Keyboard and PS/2 Mouse
Connectors....................................................................... 16
2.2.8 Installing USB Connector (Optional)............... 17
2.2.9 Enabling LAN by-pass feature........................ 18
C h a p t e r 3..................................................................................... 21
3.1 BIOS Introduction .................................................... 21
3.2 BIOS Setup.............................................................. 21
3.3 Standard CMOS Setup............................................ 23
vi
3.4 Advanced BIOS Features........................................ 27
3.5 Advanced Chipset Features.................................... 31
3.6 Integrated Peripherals............................................. 35
3.7 Power Management Setup...................................... 40
3.8 PNP/PCI Configuration............................................ 41
3.9 PC Health Status ..................................................... 44
3.10 Load Optimized Defaults......................................... 45
3.11 Set Supervisor/User Password................................ 46
3.12 Save & Exit Setup.................................................... 48
3.13 Quit Without Saving................................................. 49
A p p e n d i x A............................................................................... 51
NA-0043 Hardware Installation Guide
Introduction 1
C h a p t e r 1
Introduction
This chapter contains the general information and the detailed
specifications of the NA-0043 series Network Appliance server.
Chapter 1 includes the following sections:
General Description Mechanical Dimensions
Features I/O Outlets
System Specifications
1.1 General Description
NA-0043A and NA-0043C Front View (slim type)
NA-0043G Front View (1U type)
NA-0043 Hardware Installation Guide
2 Introduction
Model
Number
Form Factor Number of
LAN Ports
Mini-
PCI
CPU Compact
Flash
Fanless
NA-0043A Slim 4
x10/100Mb
ps (Realtek
8100C)
x* x 3
NA-0043C Slim 4 x
10/100Mbp
s (Intel
82551)
x* x 3
NA-0043G 1U,
Desktop
4 x
10/100Mbp
s (Intel
82551)
3** 3x
* Intel Ultra Low Voltage Celeron M, 600MHz, Zero Cache
** Intel 479-pin socket for Pentium M FSB400 processor
The NA-0043 series server is designed for network software solution
providers those have data secure, voice over IP, video streaming,
network bandwidth controller and another networking appliance
requirements across this stable and reliable multiple LAN device.
They have slim type with FAN less and 1U type with high computing
design form factor. There can be deployed up to four LAN ports
combinations for customer selection in the maximum for application.
They also can support LAN by-pass features (for NA-0043A,
NA-0043Cand NA-0043G) which can isolate the defective segments.
NA-0043 series has pretty good enclosure management interface to
be implemented in the factory default. It can support P.O.S.T (Power
On Self Test) feature through hyper-terminal by console port. And
clear LED indicators is available for status tracking by customer.
NA-0043 Hardware Installation Guide
Introduction 3
And it has room space for one 2.5” hard drive deployment. Customer
can implement system log and monitoring functions through this
hardware specification. With its innovative mechanical and electrical
design, the NA-0043 series (for NA-0043G) server provides one mini-PCI
expansion slot for VPN encryption / decryption adapter board and another
special functions enabling. It cans enhancement network security
process performance and off loads the CPU loading.
The NA-0043 series is an excellent networking application platform for
network secure in the SOHO (Small Office and Home Office) market.
1.2 Standard Features
zUltra Low Voltage Intel® Celeron® M processor , low
power consumption and high computing power ÆFor
NA-0043A, NA-0043C. And Intel® Pentium® M processor
is for NA-0043G.
zSupports four Ethernet ports
zSupports LAN bypass and BIOS redirected to COM port
features
zCompletely fanless or 1U desktop system design.
zSupports accelerate IPsec and incorporates security
engines through Mini PCI socket
zSupports RS-232, 2 USB ports and CF (For NA-0043G)
zSuitable for network appliances: VPN, Network Bandwidth
Controller, SSL/TLS, Firewall, etc,.
NA-0043 Hardware Installation Guide
4 Introduction
1.3 System Specifications
1.3.1 Hardware
zForm Factor:
Slim type FAN less design and 1U desktop
zCapacity:
It is from 0 to 250GB and beyond, depending on the 2.5” hard
disk drive capacity.
zPower Supply:
External power adapter 12V, 5A (60W)
zHard Drive:
Spacing for 1 x IDE HDD (2.5”)
zFront Connector:
1 x Console port
zFront Panel LED:
1 x LED for HDDs
8 x LED for LANs (Four of them are for per port Link and Activity,
other of them are for per port transfer rate)
1 x Power LED for System
zRear Connector:
4 x Ethernet LAN port
1 X DC-in power connector
zProcessor:
IntelULV CeleronM processor
Zero cache and 600MHz ÆFor NA-0043A, NA-0043C,
IntelPentiumM processor ÆFor NA-0043G
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali AXIOMTEK Server
AXIOMTEK
AXIOMTEK NA590 Series Manuale utente
AXIOMTEK
AXIOMTEK NA-320 Series Manuale utente
AXIOMTEK
AXIOMTEK NA-550 Series Manuale utente
AXIOMTEK
AXIOMTEK NA-1301 Manuale
AXIOMTEK
AXIOMTEK IRU131 Manuale utente
AXIOMTEK
AXIOMTEK NA362 Manuale utente
AXIOMTEK
AXIOMTEK AX62140TP-P4 Manuale utente
AXIOMTEK
AXIOMTEK NA570 Series Manuale utente
AXIOMTEK
AXIOMTEK NA580 series Manuale utente
AXIOMTEK
AXIOMTEK NA-814 Manuale
