Bartec Auto ID TECH600 Manuale utente

Bartec Auto ID Ltd. NOV 2021

TECH600

Tyre Pressure Monitoring System Tool

User Guide

Test:

commence a TPM

test, only works on

Vehicle Audit Screen

Home/Back/Esc:

returns to Home menu

Mini-USB

Display

Enter

On/Off:

hold down

for a few seconds

More information:

on some screens more

TPMS information can be

viewed

Rubber housing

USB cable

connector

Up/Down/Left

/Right

Navigation

TECH600 User Guide NOV 2021

2 |Page

FOREWORD

Thank you for choosing the TECH600. This manual will help you get your tool up &

running and explains how to get the most out of all its great features.

PLEASE ENSURE THAT YOUR TOOL IS FULLY CHARGED BEFORE YOU FIRST USE

IT AND BEFORE REGISTRATION.

If you need any further assistance, please visit the support pages on our website at

www.bartecautoid.com

TECH600 User Guide NOV 2021

3 |Page

LIST OF CONTENTS

FOREWORD ........................................................................................................... 2

LIST OF CONTENTS ............................................................................................... 3

IMPORTANT NOTICES ............................................................................................ 4

SAFETY PRECAUTIONS ........................................................................................... 5

BEFORE GETTING STARTED ................................................................................... 7

KIT COMPONENTS................................................................................................. 7

REGISTRATION....................................................................................................... 8

CHARGING TOOL................................................................................................. 11

POWER ON/OFF SEQUENCE ............................................................................. 11

HOME MENU ...................................................................................................... 12

MORE TPMS INFORMATION............................................................................... 13

SELECT AVEHICLE............................................................................................... 13

NEW SERVICE ...................................................................................................... 14

1/6 CHECK SENSORS .......................................................................................... 15

2/6 PROGRAMMABLE SENSOR ............................................................................ 17

3/6 RELEARN ...................................................................................................... 18

4/6 OBD DIAGNOSTICS ..................................................................................... 20

5/6 TECHNICAL INFORMATION ........................................................................... 21

6/6 REVIEW VEHICLE DATA................................................................................ 22

SETTINGS............................................................................................................. 23

CONNECTING TO A WIFI NETWORK.................................................................... 23

CONNECTING TO THE BLUETOOTH OBDII MODULE........................................... 24

TPMS DESKTOP ................................................................................................. 25

UPDATING THE TOOL VIA USB CABLE ................................................................ 27

UPDATING YOUR TOOL VIA WIFI....................................................................... 28

UPDATING THE OBD II MODULE ........................................................................ 28

APPENDIX............................................................................................................ 29

TECHNICAL SPECIFICATION.................................................................................. 30

TECH600 User Guide NOV 2021

4 |Page

IMPORTANT NOTICES

SAFETY DEFINITIONS

All Danger, Warning, Important, and Note messages must be followed for your safety. These

safety messages are in the following form

DANGER: Means you may risk possible loss of life.

WARNING: Means you may risk possible bodily harm.

CAUTION: Means you risk damage to the vehicle or the tool.

These safety messages cover situations Bartec is aware of. Bartec cannot know, evaluate and

advise you as to all the possible hazards. You must be certain that any conditions or service

procedures encountered do not jeopardise your personal safety.

No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any

form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without

the prior written permission of Bartec.

DISCLAIMER

All information, illustrations, and specifications contained in this technical instruction manual

are based on the latest information available at the time of publication. The right is reserved to

make changes at any time without obligation to notify any person or organization of such

revisions or changes. Further, Bartec shall not be liable for errors contained with the furnishing,

performance or use of this material.

TECH600 User Guide NOV 2021

5 |Page

SAFETY PRECAUTIONS

Read carefully the installation, operating and maintenance instructions in the Operator’s

manual.

Do not allow unqualified persons to use this equipment. This will prevent injury to persons and

damage to the equipment.

The work place must be dry, sufficiently lit and well ventilated.

Do not forget that breathing carbon monoxide (odourless) can be very dangerous and even

fatal.

WHEN WORKING ON THE VEHICLE:

•Wear suitable clothing and act in such a way as to prevent industrial accidents.

•Before starting, check to be certain the gear shift is in neutral (or in PARK (P) if the

transmission is automatic) and put the handbrake on and check to be sure the wheels

are completely locked.

•Do not smoke or use naked flames when working on a vehicle.

•Wear safety glasses to protect your eyes from dirt, dust or metal chips.

DISPOSING OF EQUIPMENT

•Do not dispose of this equipment as miscellaneous solid waste but arrange to have

collected separately.

•The re-use or correct recycling of electronic equipment (EEE) is important in order to

protect the environment and human health.

•In accordance with European Directive WEEE 2012/16/EU, special disposal points are

available for waste electrical and electronic equipment.

•Public administrators and producers of electrical and electronic equipment are involved

in facilitating the re-use and recovery of waste electrical and electronic equipment

through these collection activities and use of appropriate planning arrangements.

•Unauthorised disposal of waste electrical and electronic equipment is punishable by

law with appropriate penalties.

DISPOSING OF BATTERIES

•The TECH 600 contains a Lithium Polymer rechargeable battery which is not accessible

to the user.

WARNING

•Risk of fire of explosion if the battery is replaced by an incorrect type

•Batteries must be recycled or disposed of properly. Do not throw batteries away as part

of normal refuse disposal.

•Do no throw batteries on to an open fire

CORRECT USE OF THE TOOL

•Do not expose the tool to excessive moisture.

•Do not use the tool near sources of heat or polluting emissions (stoves, ovens, etc.).

•Do not drop the tool.

•Do not allow the tool to come into contact with water or other liquids.

TECH600 User Guide NOV 2021

6 |Page

•Do not open the tool or attempt to perform maintenance or repair operations on any

internal parts.

•You are advised to keep the packaging and to re-use it if the tool is moved to another

site.

•Do not apply metallic labels to the rear of the tool as this may cause heat build up while

charging and possible fire.

WHEN USING THE TOOL REMEMBER:

•Do not subject the tool to magnetic or electric interference.

RECEPTION,MAINTENANCE AND GUARANTEE:

Inspect the tool when delivered. Damage sustained during shipment is not covered by the

guarantee. Bartec will accept no responsibility for material or bodily harm resulting from

inappropriate use of the product, failure to maintain it, or incorrect storage conditions.

Bartec provides training for clients desirous of acquiring the knowledge required for the correct

use of its products.

Only personnel authorized by Bartec are permitted to make any repairs that may be necessary.

This tool is guaranteed against any manufacturing fault for 12 months as of date of invoice

(parts and labour) only if product has been correctly used. Serial number must stay readable

and proof of purchase must be retained for presentation upon request.

Bartec Auto ID Ltd

Unit 9

Redbrook Business Park

Wilthorpe Road

Barnsley

S75 1JN

+44 (0) 1226 209226

TECH600 User Guide NOV 2021

7 |Page

BEFORE GETTING STARTED

1. Charging

NOTICE: Only use the power supply or USB cable that is included in the TECH600 tool kit to

charge this tool. The use of un-approved power supplies may damage it and will void the tool

warranty.

2. Registration

The Bartec TECH600 can be registered through the TPMS Desktop software, found at

www.tpmsdesktop.eu. This allows the user to update the tool to the latest software through

the method they prefer.

3. Update

Once the tool is registered through TPMS Desktop, verify the software level loaded to the level

available online and update the tool if necessary. Updating through the TPMS Desktop is

recommended.

4. Disconnecting from PC

NOTICE: Before disconnecting the tool from a PC, please ensure to “safely remove hardware”

first, by locating the “Safely Remove Hardware” icon on the lower right hand side of the PC

screen. This will prevent the data on the tool from being corrupted.

KIT COMPONENTS

The TECH600 kit inside the tool box includes:

•TECH600 TPMS activation tool

•Bluetooth (BT) OBDII Module

•Qi Charging cradle

•USB cable

•Tool case

Identifying Kit Components and Features

The TECH600 tool is battery operated and generates a low-frequency magnetic field to

activate tyre sensors. It receives UHF radio signals from the tyre sensors typically at 434MHz.

USB Cable

BT OBDII

Module

TPMS

activation

tool

Qi Charging cradle

Tool case

TECH600 User Guide NOV 2021

8 |Page

REGISTRATION

Automatic registration takes place when the tool is first turned on. Registration enables the

notification of software updates and the ability to download update files to the tool. Once an

account has been made with TPMS Desktop, the tool will be registered to that account, and

the latest available updates will be downloaded.

To register a tool, navigate to the Bartec TPMS Desktop at tpmsdesktop.eu on your PC.

Download the TPMS Desktop software, and then install it using ‘setup.exe’. When the TPMS

Desktop has been load for the first time, the user will be presented with the following:

Screen when you first turned the

tool on.

TECH600 User Guide NOV 2021

9 |Page

Select ‘Register’ to create a new account. The following screen will be displayed:

It is important to fill in all fields completely and accurately. This information will help Bartec

remain in contact regarding updates and other important TPMS information. Choose a

username (without a space) and password.

If the details are accepted, this message will show:

The following email should arrive within a few minutes:

When clicking ‘Confirm account’ it will bring the user to the website and the following page

will show that the registration was successful. Return to the TPMS Desktop to login.

TECH600 User Guide NOV 2021

10 |Page

After Login, the main screen of the TPMS Deskop is displayed.

Connect the TECH600 to the computer. The TPMS Desktop will automatically register the

tool, and will display the message: “tool successfully registered”. The TPMS Desktop will

then check for any updates that can be applied to the tool. Alternatively, the user can

navigate to ‘Update’.

Once registered, the user will see the tool listed, along with a whether the tool is up to date:

Updating the TECH600 and keeping it up to date using the TPMS Desktop is recommended.

Indice

Altri manuali Bartec Auto ID Strumento di misura

Bartec Auto ID

Bartec Auto ID Tech500SDE Manuale utente

Bartec Auto ID

Bartec Auto ID TECH450 Manuale utente

Bartec Auto ID

Bartec Auto ID ALCAR TECH350 Manuale utente

Bartec Auto ID

Bartec Auto ID TECH500 Manuale utente

Bartec Auto ID

Bartec Auto ID TECH700 Manuale utente

Bartec Auto ID

Bartec Auto ID TECH1000 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente