basIP AA-07FBC Manuale utente
USER MANUAL
ENTRANCE PANEL
AA-07FBC
AA-07FBC
to IP intercoms.
BAS-IP hybrid panels support simultaneous operation with 3 systems: directly with
the BAS-IP digital IP system, with VoIP telephony systems (operating via SIP) and
the Laskomex digital two-wire system (RAIKMANN, RAINMAN, MARSHAL, KEIMAN,
FILMAN, XVOICE).
AA-07FBC is a multi apartment panel that made it possible to make calls from this
device both to two-wire digital intercom systems of the Laskomex type and
Full User Manual
Device description wiki.bas-ip.com
ENTRANCE PANEL
Main features
• Panel type: Multi-apartment.
• Display: 4.3’’ TFT, color with backlight.
• Keypad: Backlight mechanical buttons.
• Camera: 1/3”.
• Resolution: 2 Мp.
• Сamera angle: 110° (horizontal).
• Output video: Full HD (1920 × 1080), H.264 Main Profile.
• Night backlight: 6 LEDs.
• Light sensitivity: 0,01 LuX.
• Protection class: IP65.
• IK-Code: IK07.
• Working temperature: -40 — +65 °С.
• Power consumption: 6,5 W, in standby — 3,6 W.
• Power supply: +12 V DC.
• Body: Aluminum.
• Colors: Silver.
• Dimensions for installation: 141 × 351 × 60 mm.
• Size of the panel: 155 × 375 × 55 mm.
• Installation: Flush, surface with BR-AA7 bracket.
Appearance
123
456
7 8 9
0
*#T
Proximity sensors.
Keypad.
Reader.
Backlight.
Loudspeaker.
Camera.
4.3’’ Display.
1
2
3
4
5
6
7
-
-
-
-
-
-
-
1
3
2
4
6
7
5
Completeness check of the product
Before installation of the outdoor panel, it is necessary to check that
it is complete and all components are available.
Outdoor panel kit includes:
Outdoor panel
Manual
Flush mount bracket
Set of wires with connectors for connection of power supply,
lock, and additional modules
A set of cups
Set of screws with a wrench
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the outdoor panel
connection.
For connection you will need:
Electrical connection
An Ethernet UTP CAT5 or higher cable connected to a PoE network switch
or regular switch/router.
Cable length recommendations
The maximum length of the UTP CAT5 cable segment should not exceed 100 meters,
according to the IEEE 802.3 standard.
EAN: 5060514914489 (SILVER)
Connection scheme of electromagnetic lock using
uninterruptible power supply UPS-DP/S
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
Electromagnetic Lock
SH-45
Door Sensor
SH-42
(optional)
Exit Button
GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
L+
L-
Laskomex
Power supply at +12 V, 2 amps.
Wires must be connected to connect the door sensor, the exit button,
the two locks control module (optional), and to a two-wire digital system
such as Laskomex.
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
SH-45 Door Sensor
SH-42
(optional)
Exit Button GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
SH-45 Door Sensor
SH-42
(optional)
Exit Button GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
123
+12V GND Lock
+-
Power
+12 V
Opening
lock time
adjustment
Exit
button
Less
More
N.C.
N.O.
GND
Contact
Fire alarm
input
Switching
contact type:
normally open
or normally closed
1. +12V
2. Ground
3. Lock
4. COM
5. N.C./N.O.
6. Unused
Output to connect
electromechanical lock
LAN
Power
SH-45 Door Sensor
SH-42
(optional)
Exit Button GND
+12V
123
NC COM
Relay outputs to lock
4 5
NC NO
Wiegand output
123
+5V D0
4
GND D1
RS485
123
+12V 485+
4
GND 485-
Exit Button/Door Sensor
123
Exit Din
4
GND DS
RS232 (Option)
Green
RX
Black White
GND TX
COM
Connection scheme of electromagnetic lock using
third-party power supply for the lock
Connection scheme of electromechanical lock using
uninterruptible power supply UPS-DP/S
Connection scheme of electromechanical lock using
third party power supply for the lock
+12V
DC
Electromagnetic Lock -+
Electromechanical lock
Electromechanical lock
+12V
DC
-+
L+
L-
Laskomex
L+
L-
Laskomex
L+
L-
Laskomex
Mechanical mounting
Before installation of the outdoor panel it is necessary to provide a hole
It is also necessary to provide supply of a power cable, additional modules
and the local network.
Attention: the hole at the bottom is designed to drain the water.
Do not intentionally close it. Also it is necessary to make a drain for water
at the bottom of the niche which will serve to divert water out.
or a recess into a wall with dimensions 143×353x61 mm (for flush mount)
dimensions of the bracket (mounting box) = 141×351×60 mm.
141 mm
351 mm
239 mm
Outdoor Panel Flush Bracket
Niche ScrewsOutdoorPanel
143 mm
353 mm
109-130 cm
155 mm
375 mm
55 mm
123
456
7 8 9
0
*#T
123
456
789
0
*#T
Flush Bracket
EAN: 5060514914489 (SILVER)
Warranty
The warranty card number
Model name
Serial number
Seller name
With following stated terms of warranty is familiar, functional test was
performed in my presence:
Customer signature
Warranty conditions
The warranty period of the product — 36 (thirty-six) months from
the date of sale.
Transportation of product must be in its original packaging or supplied one
by the seller.
The product is accepted in warranty repair only with a properly filled warranty
card and the presence of intact stickers or labels.
The product is accepted for examination in accordance with the cases
provided by law, only in the original packaging, in a full complete set,
appearance corresponding to the new equipment and presence of all relevant
properly filled documents.
This warranty is in addition to the constitutional and other consumer rights
and in no way restrict them.
Terms of warranty
The warranty card must indicate the name of the model, serial number,
purchase date, name of the seller, seller company stamp and
the customer’s signature.
Delivery to the warranty repair is carried out by the buyer himself.
Warranty repairs carried out only during the warranty period specified
in the warranty card.
The service center is committed to do everything possible to carry out
the repair warranty products, up to 24 working days. The period spent
on the restoration of product functionality is added to the warranty period.
Notes
EAN: 5060514914489 (SILVER)
www.bas-ip.com
Indice
Altri manuali basIP Sistema di interfono
basIP
basIP AV-05FD Manuale utente
basIP
basIP AV-02FDR/E Manuale utente
basIP
basIP AQ-07LL Manuale utente
basIP
basIP AQ-07LW Manuale utente
basIP
basIP AV-01 Foglio di istruzioni
basIP
basIP SP-03 Manuale utente
basIP
basIP AV-04SD Manuale utente
basIP
basIP SH-47T Manuale utente
basIP
basIP AV-01D Manuale utente
basIP
basIP AT-07L Manuale utente
basIP
basIP AT-10 Manuale utente
basIP
basIP AA-14FBS Manuale utente
basIP
basIP AV-07T Manuale utente
basIP
basIP AA-14FB Manuale utente
basIP
basIP AA-07BD Manuale utente
basIP
basIP AV-01BD Manuale utente
basIP
basIP SP-03 Manuale utente
basIP
basIP AA-07B Manuale utente
basIP
basIP BI-02B Manuale utente
basIP
basIP AQ-07LL Manuale utente
