Belkin F5D5010 Manuale utente
Connect your PC to a network or broadband modem
Notebook Network
CardBusCard
network
F5D5010
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 1
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 2
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installing the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installing the Network Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5
Connecting to a DSL or Cable Modem . . . . . . . . . . . . . . . . . . .6-13
Creating a Simple Network . . . . . . . . . . . . . . . . . . . . . . . . . . .14-28
Sharing an Internet Connection . . . . . . . . . . . . . . . . . . . . . . . .29-46
Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Warranty, FCC, CE Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 3
Congratulations on your purchase of this quality Belkin product.
You can now enjoy the benefits of sharing printers and
peripherals, exchanging data quickly between connected
computers, and communicating via e-mail and the Internet. This
guide explains how to install and use the Belkin Notebook
Network CardBus Card on a PC running Microsoft®Windows®98,
2000, NT®4.0, or Me operating system software.
Features:
• Compatible with PCMCIA CardBus specification
• Provides LED indicators for monitoring network traffic
Contents of Package:
• One Notebook Network CardBus Card
• One CD-ROM
• User Guide
Introduction
1
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 1
Installing t e Hardware
2
Installing the Notebook Network Card in PCs with CardBus Slots
1. Turn off the power to the notebook.
2. Insert the Notebook Network Card in the CardBus slot of
your notebook.
3. Connect the Notebook
Network Card’s adapter into
the connector on the rear of
the card.
4. Connect the other end of the
CAT5 cable and RJ45 plug
into the network device.
Note: A standard Belkin network cable cannot be used to directly
connect two computers. A specially wired cable called a crossover
cable is needed to allow you to connect two computers without
the use of a network hub or switch. Belkin crossover cables are
yellow (Belkin’s A3X126-XX-YLW-M).
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 2
Installing t e Network Drivers
3
Installing the network drivers
Now that you have properly installed the Notebook Network CardBus
Card and it is properly connected to the network, we are now
ready to configure the software to allow your computers to work
together efficiently.
1. Turn on the power to the PC. Windows will automatically
detect that a new device has been installed and will display
the following window:
2. The "Add New Hardware Wizard" will begin:
3. Click the Next button.
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 3
Installing t e Network Drivers
4
5. Select the CD-ROM drive box. Place the CD-ROM supplied with the
card in your CD-ROM and click the Next Button.
4. When asked, "What do you want Windows to do?" select the first
option- "Search for the best driver for your device.(Recommended)"
and click the Next Button.
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 4
Installing t e Network Drivers
5
6. The following screen will appear:
7. Click the Next Button and the following screen will appear:
8. Click on the Finish Button to complete the wizard. Your computer may
prompt you to restart, if so, allow the system to restart.
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 5
Connecting to a DSL or Cable Modem
6
Many DSL or cable modems require connection to a computer through
a network interface card (NIC). To determine if your cable or DSL
modem can be connected through a network interface card, you can
either consult your modem’s documentation or simply look at the ports
on the back of the modem. If your modem has a port that looks just
like the one pictured below (similar to a standard phone jack, but a
little larger), then the Belkin Notebook Network CardBus Card is an easy
way to connect to these modems and take advantage of high-speed
Internet access.
10/100Base-T Ethernet Connector
Connecting the hardware
To connect the modem to your Network Card, you will need an Ethernet
"patch cable," or "CAT5 cable". Most cable and DSL modems will
require connection using a "crossover patch cable," however, some
modems offer a second network connector labeled "Computer," which
can be connected to the Network Card using a standard patch cable. To
determine which cable to use, it is recommended that you consult your
modem’s installation guide or user manual.
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 6
Connecting to a DSL or Cable Modem
7
Belkin offers a full line of these cables, available from any major
retailer or distributor of computer-related products. To achieve the
best performance from your Cable or DSL modem, we recommend
the following part numbers:
Crossover Ethernet Patch Cable:
A3X126-xx-YLW-M, where "xx" denotes the cable length in feet
FastCAT5e Ethernet Patch Cable:
A3L850-xx-yyy-S, where "xx" denotes the length, and "yyy"
denotes the color of the cable
To connect your DSL or cable modem to the computer, make sure
you have first installed both the Belkin Notebook Network CardBus
Card and its drivers as detailed earlier in this manual. Once the
hardware and drivers are installed, plug one end of the Ethernet Patch
Cable to the connector on the Network Card, and plug the other end
into the connector on the modem.
Configuring your computer
Once the computer is connected to your DSL or cable modem, you
will need to configure your computer’s network settings to access the
Internet using the modem.
Note: This section includes general instructions for configuring your
computer to use a DSL or cable modem, which work for most
DSL and cable service providers; however, some providers have
special requirements or non-standard configurations. If your DSL
or cable provider has provided instructions which differ from this,
please follow those instructions. If the procedure below does not
work for you, please contact your DSL or cable provider for
instructions on configuring your computer to use the modem.
P73635-F5D5010-man.qxd 6/4/01 4:54 PM Page 7
Indice
Altri manuali Belkin Scheda di rete
Belkin
Belkin F5D4085 Manuale utente
Belkin
Belkin P74485-A Manuale utente
Belkin
Belkin F6D3000 Manuale utente
Belkin
Belkin F5D9010 Manuale utente
Belkin
Belkin N1 WIRELESS NOTEBOOK CARD F5D8011 Manuale utente
Belkin
Belkin Gigabit Ethernet ExpressCard F5U250 Manuale utente
Belkin
Belkin F5D6001 Manuale utente
Belkin
Belkin LAN Card Manuale utente
Belkin
Belkin N1 WIRELESS NOTEBOOK CARD F5D8011 Manuale utente
Belkin
Belkin F5D7000 Manuale
Belkin
Belkin 8820-00209EA F5D8053 Manuale utente
Belkin
Belkin F5D7000H Manuale utente
Belkin
Belkin DESKTOP CARD F5D7001 Manuale utente
Belkin
Belkin F6D3000-HP Manuale utente
Belkin
Belkin DESKTOP CARD F5D7001 Manuale utente
Belkin
Belkin F5D7050_v3 Manuale utente
Belkin
Belkin F6D3010 Manuale utente
Belkin
Belkin VISION N1 Manuale utente
Belkin
Belkin F5D8013 v3 Manuale utente
Belkin
Belkin F5D7050 Manuale utente
