BENDIXKing KI 300 Manuale utente

9201-B San Mateo Blvd N.E.

Albuquerque, New Mexico 87113

U.S.A.

Telephone: 855-250-7027 (Toll Free U.S.A./Canada)

Telephone: 602-365-7027 (International Direct)

KI 300 ELECTRONIC ATTITUDE INDICATOR

INSTALLATION MANUAL

Document P/N 89000004-101 Rev 1

June 2018

Export Control

This document contains technical data and is subject to U.S. export regulations. These commodities,

technology, or software were exported from the United States in accordance with the export

administration regulations. Diversion contrary to U.S. law is prohibited.

ECCN: 7E994

Blank Page

____________________________________________________________________________

89000004-101 KI 300 Installation Manual

Rev 1 Page T-1

Legal Notice

Proprietary Information

Honeywell - Confidential

THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE PROPERTY OF HONEYWELL INTERNATIONAL

INC., CONTAIN TRADE SECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED, DUPLICATED, OR

DISCLOSED FOR ANY PURPOSE WITHOUT PRIOR WRITTEN PERMISSION OF HONEYWELL INTERNATIONAL

Honeywell Materials License Agreement

The documents and information contained herein ("the Materials") are the proprietary data of

Honeywell International Inc. These Materials are provided for the exclusive use of Honeywell Service

Centers; Honeywell-authorized repair facilities; operators of Honeywell aerospace products subject to

an applicable product support agreement, their wholly owned-subsidiaries or a formally designated

third party service provider; and direct recipients of Materials from Honeywell’s Aerospace Technical

Publication Distribution.

The terms and conditions of this License Agreement govern your use of these Materials, except to the

extent that any terms and conditions of another applicable agreement with Honeywell regarding the

operation, maintenance, or repair of Honeywell aerospace products conflict with the terms and

conditions of this License Agreement, in which case the terms and conditions of the other agreement

will govern.

However, this License Agreement will govern in the event of a conflict between its terms and conditions

and those of a purchase order or acknowledgement.

1. License Grant - If you are a party to an applicable product support agreement, a Honeywell Service

Center agreement, or an authorized repair facility agreement, Honeywell hereby grants you a limited,

non-exclusive license to use these Materials to operate, maintain, or repair Honeywell aerospace

products only in accordance with that agreement.

If you are a direct recipient of these Materials from Honeywell’s Aerospace Technical Publication

Distribution and are not a party to an agreement related to the operation, maintenance or repair of

Honeywell aerospace products, Honeywell hereby grants you a limited, non-exclusive license to use

these Materials to maintain or repair the subject Honeywell aerospace products only at the facility to

which these Materials have been shipped ("the Licensed Facility"). Transfer of the Materials to another

facility owned by you is permitted only if the original Licensed Facility retains no copies of the Materials

and you provide prior written notice to Honeywell.

2. Rights In Materials - Honeywell retains all rights in these Materials and in any copies thereof that are

not expressly granted to you, including all rights in patents, copyrights, trademarks, and trade secrets.

No license to use any Honeywell trademarks or patents is granted under this License Agreement.

____________________________________________________________________________

89000004-101 KI 300 Installation Manual

Rev 1 Page T-2

3. Confidentiality - You acknowledge that these Materials contain information that is confidential and

proprietary to Honeywell. You agree to take all reasonable efforts to maintain the confidentiality of

these Materials.

4. Assignment And Transfer - This License Agreement may be assigned to a formally designated service

designee or transferred to a subsequent owner or operator of an aircraft containing the subject

Honeywell aerospace products. However, the recipient of any such assignment or transfer must assume

all of your obligations under this License Agreement. No assignment or transfer shall relieve any party of

any obligation that such party then has hereunder.

5. Copies of Materials - Unless you have the express written permission of Honeywell, you may not

make or permit making of copies of the Materials. Notwithstanding the foregoing, you may make copies

of only portions of the Material for your internal use. You agree to return the Materials and any copies

thereof to Honeywell upon the request of Honeywell.

6. Term - This License Agreement is effective until terminated as set forth herein. This License

Agreement will terminate immediately, without notice from Honeywell, if you fail to comply with any

provision of this License Agreement or will terminate simultaneously with the termination or expiration

of your applicable product support agreement, authorized repair facility agreement, or your formal

designation as a third party service provider. Upon termination of this License Agreement, you will

return these Materials to Honeywell without retaining any copies and will have one of your authorized

officers certify that all Materials have been returned with no copies retained.

7. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting

from a breach of this License Agreement.

8. Limitation of Liability - Honeywell does not make any representation regarding the use or sufficiency

of the Materials. THERE ARE NO OTHER WARRANTIES, WHETHER WRITTEN OR ORAL, EXPRESS, IMPLIED

OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, (i) WARRANTIES ARISING FROM COURSE OF

PERFORMANCE, DEALING, USAGE, OR TRADE, WHICH ARE HEREBY EXPRESSLY DISCLAIMED, OR (ii)

WARRANTIES AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF THIRD PARTIES, EVEN IF

HONEYWELL HAS BEEN ADVISED OF ANY SUCH INFRINGEMENT. IN NO EVENT WILL HONEYWELL BE

LIABLE FOR ANY INCIDENTAL DAMAGES, CONSEQUENTIAL DAMAGES, SPECIAL DAMAGES, INDIRECT

DAMAGES, LOSS OF PROFITS, LOSS OF REVENUES, OR LOSS OF USE, EVEN IF INFORMED OF THE

POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THESE LIMITATIONS

AND EXCLUSIONS WILL APPLY REGARDLESS OF WHETHER LIABILITY ARISES FROM BREACH OF

CONTRACT, WARRANTY, TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE), BY OPERATION OF LAW,

OR OTHERWISE.

9. Controlling Law - This License shall be governed and construed in accordance with the laws of the

State of New York without regard to the conflicts of laws provisions thereof. This license sets forth the

entire agreement between you and Honeywell and may only be modified by a writing duly executed by

the duly authorized representatives of the parties.

____________________________________________________________________________

89000004-101 KI 300 Installation Manual

Rev 1 Page T-3

Safety Advisory

WARNING: BEFORE THE MATERIALS CALLED OUT IN THIS PUBLICATION ARE USED, KNOW THE

HANDLING,

STORAGE AND DISPOSAL PRECAUTIONS RECOMMENDED BY THE MANUFACTURER OR

SUPPLIER. FAILURE

TO OBEY THE MANUFACTURERS’ OR SUPPLIERS’ RECOMMENDATIONS CAN

RESULT IN PERSONAL INJURY

OR DISEASE.

This publication describes physical and chemical processes which can make it necessary to use chemicals,

solvents, paints, and other commercially available materials. The user of this publication must get the

Material

Safety Data Sheets (OSHA Form 174 or equivalent) from the manufacturers or suppliers of the

materials to be

used. The user must know the manufacturer/ supplier data and obey the procedures,

recommendations,

warnings and cautions set forth for the safe use, handling, storage, and disposal of

the materials.

Warranty/Liability Advisory

WARNING: HONEYWELL ASSUMES NO RESPONSIBILITY FOR ANY HONEYWELL EQUIPMENT WHICH

IS NOT

MAINTAINED AND/OR REPAIRED IN ACCORDANCE WITH HONEYWELL’S PUBLISHED

INSTRUCTIONS

AND/OR HONEYWELL’S FAA/SFAR 36 REPAIR AUTHORIZATION. NEITHER DOES

HONEYWELLASSUME

RESPONSIBILITYFORSPECIALTOOLSANDTESTEQUIPMENTFABRICATEDBY

COMPANIES OTHER THAN

HONEYWELL.

WARNING: INCORRECTLY REPAIRED COMPONENTS CAN AFFECT AIRWORTHINESS OR DECREASE

THE LIFE

OF THE COMPONENTS. INCORRECTLY FABRICATED SPECIAL TOOLING OR TEST

EQUIPMENT CAN RESULT IN

DAMAGE TO THE PRODUCT COMPONENTS OR GIVE UNSATISFACTORY

RESULTS.

____________________________________________________________________________

89000004-101 KI 300 Installation Manual

Rev 1 Page T-4

Honeywell is a registered trademark of Honeywell International Inc.

All other marks are owned by their respective companies.

Our products are under continuous research and development. Any information may therefore be

changed

without prior notice. Honeywell reserves the right to make improvements or changes in the

product described

in this manual at any time without notice. While reasonable efforts have been made

in the preparation of this

document to assure its accuracy, Honeywell assumes no liability resulting from

any errors or omissions in this

document, or from the use of the information contained herein.

Honeywell Aerospace Online Technical Publications Website

Go to the Honeywell Online Technical Publications Website at www.myaerospace.com.

To download or view publications online

To tell BendixKing of a possible data error in a publication.

Changes to this manual are provided to users who have registered via the website to receive

updates.

BendixKing Customer Support

If you need to speak to personnel about Technical matters, the BendixKing Customer Support team

provides 24/7 customer service.

Telephone: 855-250-7027 (Toll Free U.S.A./Canada)

Telephone: 602-365-7027 (International)

Website: www.bendixking.com/support

Email: techsupport@bendixking.com

____________________________________________________________________________

89000004-101 KI 300 Installation Manual

Rev 1 Page T-5

RECORD OF REVISIONS

Revision

Revision Date

Description

10/26/2017

Initial release

6/10/2018

KA310-207 –Update to capture changes in the KI 300 setup pages

CURRENT REVISION DESCRIPTION

Section

Description

N/A

Initial release

4.7.3

KA310-205 –Updates from Sandia Aerospace.

SAISW-44 - Add Diagnostic Mode (Setup menu)

SAISW-55 - Add Yaw Rate Alignment to setup pages

SAISW-73 –Setup Page for Panel Type

____________________________________________________________________________

89000004-101 KI 300 Installation Manual

Rev 1 Page TC-1

TABLE OF CONTENTS

1INTRODUCTION ........................................................................................................................1-1

1.1 How to Use This Manual..........................................................................................................1-1

1.1.1 General..............................................................................................................................1-1

1.1.2 Observance of Manual Instructions..................................................................................1-1

1.1.3 Symbols.............................................................................................................................1-1

1.1.4 Units of Measure ..............................................................................................................1-2

1.1.5 Electrostatic Discharge .....................................................................................................1-2

1.2 References ...............................................................................................................................1-2

1.2.1 Other Publications ............................................................................................................1-2

1.3 Acronyms and Abbreviations...................................................................................................1-3

2GENERAL INFORMATION...........................................................................................................2-6

2.1 Introduction.............................................................................................................................2-6

2.2 KI 300 Overview .......................................................................................................................2-6

2.2.1 System Functions..............................................................................................................2-6

2.2.2 System Interfaces..............................................................................................................2-7

2.3 KA 310 Overview......................................................................................................................2-7

2.4 Regulatory Compliance............................................................................................................2-8

2.5 Technical Specifications...........................................................................................................2-8

2.6 Environmental Qualification form (EQF) ...............................................................................2-10

2.7 Repair and Return..................................................................................................................2-11

3INSTALLATION CONSIDERATIONS ..............................................................................................3-1

3.1 Introduction.............................................................................................................................3-1

3.2 Certification Considerations ....................................................................................................3-1

3.2.1 Installation Approval.........................................................................................................3-1

3.2.2 EFIS Standby Applications.................................................................................................3-1

3.2.3 Substitution of Rate-Of-Turn Indicator.............................................................................3-2

3.2.4 Battery Operation.............................................................................................................3-2

3.2.5 Functional Dependencies..................................................................................................3-2

3.2.6 Operational Limitations ....................................................................................................3-2

3.2.7 TSO Deviations..................................................................................................................3-3

3.2.8 Degraded Mode Operations .............................................................................................3-4

3.3 Pneumatic Source....................................................................................................................3-4

3.4 Cooling Considerations ............................................................................................................3-4

3.5 Available Equipment................................................................................................................3-5

3.6 Installation Materials...............................................................................................................3-5

3.6.1 Accessories Available from BendixKing ............................................................................3-5

3.6.2 Materials Required But Not Supplied ...............................................................................3-5

3.6.3 Tools Required But Not Supplied......................................................................................3-6

3.7 Unpacking and Inspection........................................................................................................3-6

3.8 Handling Considerations..........................................................................................................3-6

4INSTALLATION PROCEDURES.....................................................................................................4-1

____________________________________________________________________________

89000004-101 KI 300 Installation Manual

Rev 1 Page TC-2

4.1 General.....................................................................................................................................4-1

4.2 Mounting Hole.........................................................................................................................4-1

4.3 Mounting Bracket Installation .................................................................................................4-2

4.4 Wiring Installation....................................................................................................................4-3

4.5 Pneumatic Line Installation .....................................................................................................4-5

4.6 Unit Mounting..........................................................................................................................4-6

4.7 System Configuration...............................................................................................................4-7

4.7.1 Initial Power On ................................................................................................................4-7

4.7.2 Entry & Exit From Setup Mode .........................................................................................4-8

4.7.3 Setup Pages.......................................................................................................................4-9

4.7.3.1 Pitch Trim and Roll Trim...............................................................................................4-10

4.7.3.2 Panel Type....................................................................................................................4-10

4.7.3.3 ADC Display..................................................................................................................4-10

4.7.3.4 ADC Calibration............................................................................................................4-11

4.7.3.5 V Speed Settings ..........................................................................................................4-11

4.7.3.6 IAS Units.......................................................................................................................4-12

4.7.3.7 Baro Units ....................................................................................................................4-12

4.7.3.8 Default Baro Setting.....................................................................................................4-12

4.7.3.9 IVSI Damping................................................................................................................4-12

4.7.3.10 Slip/Skid Type.............................................................................................................4-13

4.7.3.11 Diagnostic Mode........................................................................................................4-13

4.7.3.12 Autopilot Type ...........................................................................................................4-13

4.7.3.13 Software Part Numbers .............................................................................................4-14

4.7.3.14 AP Alignment .............................................................................................................4-14

4.7.3.15 AP Align Pitch/AP Align Roll.......................................................................................4-14

4.7.3.16 Yaw Rate Alignment...................................................................................................4-15

5INSTRUCTIONS FOR CONTINUED AIRWORTHINESS.....................................................................5-1

5.1 ICA General ..............................................................................................................................5-1

5.2 Airworthiness Limitations........................................................................................................5-1

5.2.1 Battery Limitations............................................................................................................5-1

5.2.2 Altimeter Limitations ........................................................................................................5-1

5.3 Battery Maintenance ...............................................................................................................5-1

5.3.1 Full Duration Load Test.....................................................................................................5-1

5.3.2 Battery Replacement Procedure ......................................................................................5-2

5.4 Airspeed and Altimeter Test & Calibration..............................................................................5-4

5.4.1 Altimeter System Test and Inspection..............................................................................5-4

5.4.2 Airspeed Trim Procedure..................................................................................................5-4

5.4.3 Altitude Trim Procedure ...................................................................................................5-5

6TROUBLESHOOTING..................................................................................................................6-1

____________________________________________________________________________

89000004-101 KI 300 Installation Manual

Rev 1 Page TC-3

LIST OF FIGURES

Figure 1-1 Symbols....................................................................................................................................1-2

Figure 4-1 Unit Front and Rear Views........................................................................................................4-1

Figure 4-2 Instrument Cutout ....................................................................................................................4-2

Figure 4-3 Front and Rear Mounting Bracket ............................................................................................4-3

Figure 4-4 Sub-D Back-Shell .......................................................................................................................4-4

Figure 4-5 Wiring Diagram.........................................................................................................................4-4

Figure 4-6 Supplied Pneumatic Fitting.......................................................................................................4-5

Figure 4-7 Thread Depth Limit ...................................................................................................................4-6

Figure 4-8 Unit Mounting With Tab/Slot Cutaway ....................................................................................4-7

Figure 4-9 Power On Screen ......................................................................................................................4-8

Figure 4-10 Setup Mode Menu..................................................................................................................4-8

Figure 4-11 KI 300 Air Data Display Options............................................................................................4-11

Figure 4-12 KI 300 Slip/Skid Indicator Display Options............................................................................4-13

Figure 5-1 Li-Poly Battery Pack ..................................................................................................................5-2

Figure 5-2 Li-Poly Battery Connections......................................................................................................5-3

LIST OF TABLES

Table 1-1 Acronyms and Abbreviations.....................................................................................................1-3

Table 2-1 KI 300 TSO Authorization ...........................................................................................................2-8

Table 2-2 KI 300 Technical Specifications ..................................................................................................2-8

Table 2-3 KI 300 Performance Characteristics...........................................................................................2-9

Table 2-4: KI 300 Environmental Qualification Form (EQF).....................................................................2-10

Table 3-1: KI 300 Base Unit Package..........................................................................................................3-5

Table 3-2: KI 300 Accessories and Installation Kits....................................................................................3-5

Table 3-3: KI 300 Installation Kit (PN 89000004-103)................................................................................3-5

Table 3-4: KI 300 Front Mounting Kit (PN 89500004-100) ........................................................................3-5

Table 3-5: Installation Materials Required But Not Supplied ....................................................................3-5

Table 3-6: Tools Required But Not Supplied..............................................................................................3-6

Table 4-1: KI 300 Electrical Pin Out............................................................................................................4-4

Table 4-2: KI 300 Setup Parameters...........................................................................................................4-9

Table 6-1: KI 300 Troubleshooting.............................................................................................................6-1

Altri manuali per KI 300

Indice

Altri manuali BENDIXKing Strumento di misura

BENDIXKing

BENDIXKing KLR 10 Guida utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente