Beta LaserMike BenchMike Pro Istruzioni per l'installazione e il funzionamento

BenchMike Pro

ID/OD/WALL

Addendum

NDC Technologies

8001 Technology Blvd.

Dayton,

Ohio 45424

U.S.A.

Main Phone +1 (937) 233-9935

General Fax +1 (

937) 233-7284

www.betalasermike.com

Making Light Work

Proprietary Notice

The information and design disclosed herein were originated by and are the property of NDC Technologies. NDC

Technologies reserves all patent, proprietary design, manufacturing, reproduction use, and sales rights thereto,

and to any article disclosed therein, except to the extent rights are expressly granted to others. The foregoing

does not apply to vendor proprietary parts.

In-line with NDC’s policy of continuous improvement, the information contained in this document may change to

allow the introduction of design improvements.

BenchMike Pro ID/OD/WALL Addendum

Part Number: MAN/EN5008-0098

Revision: C

Date of Release: September, 2018

Contact NDC

Online Support

You can access the NDC Customer Support portal, myNDC at https://ndc.custhelp.com.

myNDC is a cloud-based portal that allows you to get product support by phone, ask a question, provide feed-

back, submit an RMA request or access information in our on-line knowledge database. You can browse the

myNDC site or create a myNDC account.

x To create a myNDC account, click the Log in or Sign up button. After creating the account, you will be

immediately logged in. To log in on subsequent visits to myNDC, click the Log in or Sign up button, en-

ter your user name and password, and then click Log in.

x To submit an RMA, click on the RMA Request tab and follow the on-screen instructions.

NDC Contact Numbers

Please have your sales order number at hand before contacting NDC.

− Beta LaserMike Gauges

Beta LaserMike Gauges

Americas

+1 937 233 9935

Asia Pacific

India: +91-124-2789507

Alternative number +91

-124-

2789508

Japan: +81 (0)3 3255 8157

All other countries: +1 937 233 9935

Alternative number +44 1621 852244

China +86 21 61133609

EMEA

(Europe,

Middle East,

Africa)

Germany: 0800 1123194

France: 0810 600 400

Italy: +39 0331 454 207

All other countries (English speaking):

+44 1621 852244

Please select option 3 to be

connected to the service team

BenchMike Pro ID/OD/WALL Addendum: Caution i

Caution

x This equipment must be earthed/grounded.

x Under NO circumstances should the earth safety

connections be broken – internal damage to sensi-

tive electronic components may occur and at worst

electrocution to personnel may result.

x Digital outputs are open - collector outputs, with max-

imum specs of 35 V DC and 250ma. These levels

must not be exceeded.

x Maintenance, repairs and electrical connections

should be performed by a suitably qualified person

for the country of installation.

x The equipment contains a slow blow type fuse to

protect against input power overloads and is not user

replaceable.

Intended Use

If the equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may

be impaired.

Laser Safety Precautions

The BenchMike Pro uses a Collimated Diode laser which emits red light at a wavelength of 635nm. No invisible or

otherwise harmful radiation is emitted.

The radiant output power of either internal laser (whether it be a laser diode or gas laser) and of the entire

BenchMike Pro is relatively low. The laser beam will not harm your skin, and your eyes are protected by a natural

aversion response that will cause you to blink or look away. However, the laser light emitted from the BenchMike

Pro should be treated with caution and common sense. Do not attempt to look into the BenchMike Pro, and avoid

staring at reflections of the beam.

The American National Standard for the Safe Use of Lasers (ANSI Z136.1 — 2014) classifies this laser product

as Low Power — Class II and provides reasonable and adequate guides for its safe use. The user of the Bench-

Mike Pro and other personnel responsible for its safe use should consult this ANSI standard. It is available from:

American National Standards Institute

1430 Broadway

New York, New York 10018

The Center for Devices and Radiological Health (CDRH) of the Food and Drug Administration has established

regulations for manufacturers of laser products. All laser products sold in the U.S.A. since August, 1976 must be

certified by the manufacturer as meeting certain product performance (safety) standards, and each laser must

bear a label indicating compliance with the standard and denoting laser hazard classification.

ii BenchMike Pro ID/OD/WALL Addendum: Caution

Labels and Safety Features

This section acquaints you with the advisory and identification labels on the instrument and the safety features

incorporated into the design of the instrument. The following figures show the identification and advisory labels on

the BenchMike Pro.

Front View

Model 2025

DB-9 FEMALE

SERIAL 1

LASER SAFETY LABEL

SERIAL TAG

ETHERNET

DB-25 MALE I/O

BNC

DB-25 FEMALE FIXTURE

USB-A PRINTER

USB-B SERIAL

Aperture

label

Scanning

laser beam

Laser safety label

(back panel)

Laser emission

LED

BenchMike Pro ID/OD/WALL Addendum: Caution iii

Model 2050

FCC Manual Digital Devices Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of the equipment in a residential area is likely to

cause harmful interference, in which case, the user will be required to correct the interference at his own expense.

Important Note

This BenchMike Pro ID/OD/WALL Addendum is designed to be used in conjunction with the BenchMike

Pro Instruction Handbook and BenchMike Pro Operator Guide. This Addendum contains only specific in-

formation about the BenchMike Pro ID/OD/WALL, while the Instruction Handbook and Operator Guide

contain information about all BenchMike Pros, with and without special fixtures.

Your questions about the use of the ID/OD/WALL features of the BenchMike Pro should be answered by

this Addendum, while your more general questions about the use of the BenchMike Pro should be an-

swered by the Instruction Handbook and Operator Guide.

DB-9 FEMALE

SERIAL 1

USB-A PRINTER

LASER SAFETY LABEL

SERIAL TAG

ETHERNET

USB-B SERIAL

DB-25 MALE I/O

BNC

DB-25 FEMALE FIXTURE

iv BenchMike Pro ID/OD/WALL Addendum: Table of Contents

Table of Contents

1 QUICK START .................................................................................................................................... 1-1

1.1 INTRODUCTION ........................................................................................................................... 1-1

1.2 QUICK START PROCEDURE ......................................................................................................... 1-1

1.3 INSTALLATION ............................................................................................................................ 1-2

1.4 OPERATION ............................................................................................................................... 1-3

1.4.1 Mastering for ID/OD/WALL Measurements..................................................................... 1-3

1.4.2 Taking Measurements ..................................................................................................... 1-3

1.4.3 Mastering for ID/OD/WALL with Force Gauge measurements ....................................... 1-4

1.5 FACTORY DEFAULTS .................................................................................................................. 1-5

1.5.1 Changing the Fixture Default Settings............................................................................. 1-5

1.5.2 Changing Main Screen Defaults...................................................................................... 1-7

1.5.3 Default Settings ............................................................................................................... 1-9

2 INTRODUCTION ................................................................................................................................. 2-1

2.1 BENCHMIKE OPTIONS ................................................................................................................ 2-1

2.1.1 Interfaces ......................................................................................................................... 2-1

2.1.2 Measurement Fixtures..................................................................................................... 2-1

2.2 USING THE BENCHMIKE .............................................................................................................. 2-2

2.3 MEASURING A PRODUCT ............................................................................................................ 2-2

2.4 UNDERSTANDING THE DATA DISPLAY .......................................................................................... 2-3

2.4.1 What are Libraries? ......................................................................................................... 2-4

2.4.2 What are Features?......................................................................................................... 2-4

2.4.3 ID, OD, and WALL Features............................................................................................ 2-4

3 WORKHOLDING FIXTURES ............................................................................................................. 3-1

3.1 ID/OD/WALL FIXTURES ............................................................................................................ 3-1

3.1.1 Terminology ..................................................................................................................... 3-1

3.1.2 How the ID/OD/WALL Fixture Measures......................................................................... 3-2

3.1.3 Installing the Fixture ........................................................................................................ 3-3

3.1.4 Taking Measurements ..................................................................................................... 3-3

3.2 DESCRIPTION OF FIXTURES ........................................................................................................ 3-4

3.2.1 Auto-Rotating ID/OD/WALL Fixture for Small Tube & Hose ........................................... 3-4

3.2.2 Auto-Rotating ID/OD/WALL Fixture with Force Gauge for Very Small Tube & Hose ..... 3-6

3.2.3 Auto-Rotating Heavy Duty ID/OD/WALL Fixture for Large Tube & Hose ....................... 3-8

3.2.4 Manual ID/OD/WALL Fixture for Small Tube & Hose ................................................... 3-10

BenchMike Pro ID/OD/WALL Addendum: Table of Contents v

3.3 OTHER FIXTURES ..................................................................................................................... 3-11

4 SETUP ................................................................................................................................................ 4-1

4.1 FEATURE ICON ........................................................................................................................... 4-1

4.2 SYSTEM FUNCTIONS .................................................................................................................. 4-2

4.3 SETTINGS FUNCTIONS ................................................................................................................ 4-2

4.3.1 Batch Report.................................................................................................................... 4-2

4.3.2 Fixture Sample Report..................................................................................................... 4-3

4.3.3 Fixture Batch Report........................................................................................................ 4-4

4.4 MEASUREMENT FUNCTIONS ........................................................................................................ 4-5

5 ADVANCED CAPABILITIES .............................................................................................................. 5-1

5.1 ADVANCED SCREEN CAPABILITIES .............................................................................................. 5-1

6 SERVICING YOUR EQUIPMENT ...................................................................................................... 6-1

Indice

Altri manuali Beta LaserMike Strumento di misura

Beta LaserMike

Beta LaserMike DataPro 500 Manuale

Beta LaserMike

Beta LaserMike EFL Manuale

Beta LaserMike

Beta LaserMike LaserSpeed LS9000 Manuale

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente