Beyerdynamic Unite TH Manuale utente
UNITE TH
HANDHELD TRANSMITTER
HANDSENDER
QUICK START GUIDE
KURZANLEITUNG
en lish
Unite TH – Handheld Transmitter 3
This device complies with Pa 15 of the FCC Rules and with
Indury Canada licence-exempt RSS andard(s). Operation
is su ject to the following two conditions: (1) this device may
not cause harmful inteerence, and (2) this device mu
accept any inteerence received, including inteerence that
may cause undesired operation.
Le présent appareil e conforme aux CNR d’Indurie
Canada applica les aux appareils radio exempts de licence.
L’exploitation e autorisée aux deux conditions suivantes: (1)
l’appareil ne doit pas produire de rouillage, et (2) l’utilisateur
de l’appareil doit accepter tout rouillage radioélectrique
su i, même si le rouillage e suscepti le d’en compro-
mettre le fonctionnement.
This equipment has een teed and found to comply with
the limits for a Class A digital device, pursuant to Pa 15
of the FCC Rules. These limits are designed to provide
reasona le protection again harmful inteerence when
the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not inalled and used in accordance with the
inruction manual, may cause harmful inteerence to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful inteerence in which case the
user will e required to correct the inteerence at his own
expense.
Changes or modifications made to this equipment not
expressly approved y Beyerdynamic may void the FCC
authorization to operate this equipment.
Radiofrequency radiation exposure Information:
For ody worn operation, this equipment has een teed
and meets the FCC RF exposure guidelines when used with
the Beyerdynamic accessories supplied or designated for
this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
Ee produto eá homologado pela Anatel, de acordo com
os procedimentos regulamentados pela Resolução n°.
242/2000 e atende aos requisites técnicos aplicados,
incluindo os limites de exposição da Taxa de A sorção
Específica referente a campos elétricos, magnéticos e
eletromagnéticos de radiofreqüência de acordo com as
Resoluções n°. 303/2002 e 533/2009.
Japanese Radio Law Compliance:
This device is granted pursuant to the Japanese Radio Law
(電波法).
This device should not e modified (otherwise the granted
designation num er will ecome invalid).
Unite TH – Handheld Transmitter
4
Country Approval
USA
Canada IC: 3628C-UNITEHBT
Europe
Japan
FCC ID: OSDUNITEHBT
Compliance Information
The devices conforms to the EU guidelines
(EMC) 2014/30/EU
(LVD) 2014/35/EU
(RED) 2014/53/EU
as atteed y the CE mark.
R 202-SMH014
en lish
Unite TH – Handheld Transmitter 5
Thank you for choosing the Unite TH handheld transmitter.
To ensure an optimum peormance, we would like to give you
a rief introduction on how to use this handheld transmitter.
The Unite TH handheld transmitter was designed for arrier-
free use:
– raised sym ols or raille on the operating uttons for the
lind
For detailed operating inructions in your language, please
visit: www. eyerdynamic.com/unite
1. Safety instructions
General
• Please READ this user manual efore the first use.
• Please KEEP this user manual.
• Please FOLLOW the specified operating and safety
instructions.
Disclaimer
• eyerdynamic Gm H & Co. KG will not e lia le for any
damage to the product or injury to persons caused y
negligent, improper, incorrect or inappropriate operation of
the product.
Troubleshootin / repairs
• Never open the device yourself.
• Refer all service work to authorised professionals only.
Cleanin
• Only clean the device with a dry or slightly damp cloth.
Never use solvents, as these will damage the surface.
Rechar eable battery
• The handheld transmitter is operated with the a lithium ion
attery, which must replaced y trained service staff only.
• Use only a USB 2.0/3.0 compliant 5V power supply to charge
the attery via the integrated USB
type-C port (power consumption is max. 500 mA).
• High temperatures, paicularly in association with a high
charging atus, result in irreversi le damage of the attery.
• If you are not intending to use the attery for an extended
period or are planning to put it into orage, it is advisa le to
lower the attery’s charging level to around 50% and to ore
it at temperatures of maximum 30 °C.
• In order to ensure safe transpo y land, sea and air, the
attery used for the handheld transmitter is teed
according to the UN 38.3 transpo regulation for lithium-ion
atteries.
• Misuse or improper use could damage the attery. In
extreme cases, there is a risk of explosion, heat, fire, smoke
or gas.
• Never expose the attery to excessive heat such as
sunshine, fire or the like.
Unite TH – Handheld Transmitter
6
• Do not expose the attery to mechanical shock.
• Charge the attery efore initial use.
• Use the specified chargers for charging the attery.
• Avoid complete draining of the attery. This could damage
the attery and shorten its service life.
• If you do not use the transmitter for several months, the
atteries should e charged at least twice a year to prevent
deterioration in performance due to self-discharge.
• Clean the charging contacts of the transmitter with a clean
dry cloth, if they ecome dirty.
• Do not short-circuit the attery.
• The charging contacts could cause property damage, injuries
or fire damage if they come into contact with conductive
materials such as jewellery, keys or chains. This can lead to a
closed electric circuit and, therefore, to the material
overheating. To avoid this kind of unintentional electric circuit,
the charging contacts must e handled with care. This is
especially important if the transmitter is transported in a ag
or another container containing other metallic o jects.
Moisture / heat sources
• Keep the attery clean and dry. Never expose the device to
rain or high humidity. Do not install it in the immediate
vicinity of swimming pools, shower facilities, damp ase-
ments or other areas with unusually high air humidity.
• Never place o jects filled with water (e.g. vases or drinking
glasses) on the device. Liquids in the devices may cause a
short circuit.
• Never install or operate the device in the immediate vicinity
of radiators, lighting systems or other heat- generating
devices.
en lish
Unite TH – Handheld Transmitter 7
Disposal
At the end of its operating life this product may not
e disposed of along with normal household waste.
Please take it to a designated recycling point for
electric and electronic appliances. This is indicated
y the sym ol on the product, the operating
instructions or the packaging.
Simplified EU declaration of conformity
eyerdynamic here y declares that the wireless
transmission device complies with the EU Directive 2014/53/EU
(RED). The complete text of the EU declaration of conformity is
availa le online at the following address:
http://www. eyerdynamic.com/cod
2. Supplied accessories
• Unite TH handheld transmitter
• Quick Start Guide
• Coloured rings (1 x lack, 1 x orange)
• Storage ag
• MA-CL 36 microphone clamp
Unite TH – Handheld Transmitter
8
3. Operatin elements
3.1 Device (refer to the fold-out page)
Microphone grille, detacha le
Mute utton with status indicator light and raille
inscription
With this utton you can mute or activate the microphone.
– Status indicator light – during operation:
– in the charger:
Indicator li ht Operatin status
Off Device is switched off
Flashing yellow
slowly
• Ready to operate and
attery status > 10%
• Out of range (in slave
mode only)
Yellow In Request mode:
Connection esta lished, ut no
audio transmission;
attery status > 10 %
Green Connection esta lished, audio
transmission running (microphone
open or another audio source is
used) and attery status > 10%
Flashing green
slowly
Microphone is muted
Flashing red slowly Low attery level < 10%
Red Device is starting
Flashing red/green
rapidly
Firmware update is running
Flashing red rapidly Critical error
Indicator li ht Char in status
Off Device is switched off
Flashing green
slowly
Charging 0 - 100%
Green Battery is charged
Flashing yellow
slowly
Pairing information is eing
copied from the transmitter
Yellow for
10 seconds
Device information is
copied successfully to
charger/devices
en lish
Unite TH – Handheld Transmitter 9
Display
The display indicates the channel name, attery status
and different menus.
On/Off and menu utton
Use the on/off utton to turn the transmitter on or off. To
switch off the device, hold down the utton for 5 seconds.
In order to activate the main menu, hold down the utton
for 2 seconds. Use the menu utton to confirm settings. For
a detailed description of the individual menus and menu
items, please refer to the Unite manual on the internet at:
www. eyerdynamic.com/unite
Multifunction utton
If you are in a menu, you can scroll through the menu to
make various settings.
The following functions are availa le as shortcuts y using
the multifunction utton:
1. Talkback function on / off
On the Unite TH you can activate/deactivate the
Talk ack function: Press and hold the qsym ol of the
multifunction utton > 2 seconds until “hi Talk ack” is
displayed. Select the desired Talk ack “On” or “Off”
option.
As a third option you will find “Request”. When using this
option, the speaker can select on the transmitter if
he/she wants to accept (“Accept”) or refuse (“Deny”) the
request. You will find a detailed description in the system
operating instructions at: www. eyerdynamic.com/unite
2. Clear function
When the Talk ack function is activated on the
transmitter (“Master”) and Unite RP-T receiver, you can
use the Clear function to centrally turn off all activated
microphones.
To do this, riefly press the qsym ol of the multifunction
utton on the Unite TH. Then confirm the “Clear Mics”
prompt with “Yes” or “No”.
3. Button lock
In order to activate or deactivate the utton lock
function, press and hold the mute utton and the por
qsym ol of the multifunction utton for more than
3 seconds.
Indicator li ht Char in status
Flashes red slowly for
10 seconds
• Too many transmitters in
the charger when pairing
is initiated
• Other paring error
Flashing green/
yellow rapidly
Device is eing localised
Flashing red/green
rapidly
Firmware update is running
Flashing red rapidly Charging error
Unite TH – Handheld Transmitter
10
3.2 Display
The main screen ( elow) is displayed when the handheld
transmitter is switched on and ready for operation.
Display of all active speakers
M = “Master”
S = 1st “Su -Master” or 1st speaker (Unite RP-T)
S = 2nd “Su -Master” or 2nd speaker (Unite RP-T)
(the highlighted display shows if the “Master”,
1st “Su -Master” or 2nd “Su -Master” is active)
An underline displays if the device has een configured as
a “Master” or “Su -Master”. .
Underlined “M” = “Master”
Underlined “S” = “Su -Master”
Current channel name
Bluetooth® status
(various sym ols; depending on the status)
Bluetooth activated
Bluetooth connected
Display of active or muted microphone:
Microphone muted
Microphone active
Coloured ring, replacea le
Type plate
Charging contacts
The uilt-in attery is charged via the charging contacts
when the device is inserted into the charger. Make sure to
insert the device fully into the charging slot so that the
charging contacts have proper contact.
USB port, Type C
You can use this connector to charge the integrated attery
via a USB power adapter. Furthermore, you can connect the
handheld transmitter to the USB Type C port on a Unite
charger to charge it or to pair it with other devices.
UNITE
80
MSS %
Altri manuali per Unite TH
1
Indice
Lingue:
Altri manuali Beyerdynamic Trasmettitore
Beyerdynamic
Beyerdynamic Synexis TP8 Manuale utente
Beyerdynamic
Beyerdynamic Unite TH Manuale utente
Beyerdynamic
Beyerdynamic Unite TP Manuale utente
Beyerdynamic
Beyerdynamic SIR 800 Manuale utente
Beyerdynamic
Beyerdynamic Unite TP Manuale utente
Beyerdynamic
Beyerdynamic Unite TP Manuale utente
Beyerdynamic
Beyerdynamic Quinta TH Manuale utente
Beyerdynamic
Beyerdynamic SIR 800 Manuale utente
Beyerdynamic
Beyerdynamic S 910 Manuale utente
Beyerdynamic
Beyerdynamic AD 808 Manuale utente
