2 BinTec Communications AG
Purpose This manual explains the installation of X8500. For up-to-the-minute informa-
tion and instructions concerning the latest software release, you should always
read our release notes, especially when carrying out a software update to a lat-
er release level. The latest release notes can always be found at
www.bintec.net.
Liability While every effort has been made to ensure the accuracy of all information in
this manual, BinTec Communications AG cannot assume liability to any party
for any loss or damage caused by errors or omissions or by statements of any
kind in this document and is only liable within the scope of its terms of sale and
delivery.
The information in this manual is subject to change without notice. Additional
information, including changes and release notes for X8500, can be found at
www.bintec.net.
As a multiprotocol router, X8500 sets up WAN connections in accordance with
the system configuration. To prevent unintentional charges accumulating, the
operation of the product should be carefully monitored. BinTec Communica-
tions AG accepts no liability for loss of data, unintentional connection costs and
damages resulting from unsupervised operation of the product.
Trademarks BinTec and the BinTec logo are registered trademarks of BinTec Communica-
tions AG.
All other product names and trademarks mentioned are the property of the re-
spective companies and manufacturers.
Copyright All rights are reserved. No part of this publication may be reproduced or trans-
mitted in any form or by any means – graphic, electronic, or mechanical – in-
cluding photocopying, recording in any medium, taping, or storage in
information retrieval systems, without the prior written permission of BinTec
Communications AG. Adaptation and especially translation of the document is
inadmissible without the prior consent of BinTec Communications AG.
Guidelines and
standards X8500 complies with the following guidelines and standards:
■R&TTE Directive 1999/5/EC
■CE marking for all EU countries and Switzerland
For further information, see "Declaration of Conformity" at www.bintec.net.
