Black Box JPM407A-R2 Manuale utente

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

CUSTOMER

SUPPORT

INFORMATION

MAY 2004

JPM407A-R2

Rackmount Fiber Shelf, 3-Adapter, 1U

RACKMOUNT FIBER SHELF, 3-ADAPTER, 1U

TRADEMARKS USED IN THIS MANUAL

Any trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

1. Specifications

Construction: 16 AWG cold-rolled steel

Capacity: Supports 3 fiber adapters; Fits in 19" or 23" racks

Size: 10.8"H x 16.8"W x 1.8"D (27.4 x 42.7 x 4.6 cm)

Weight: 10.3 lb. (4.7 kg)

2. Introduction

The Rackmount Fiber Shelf is 1U high and accepts three adapter panels. (Each adapter panel has 6 or 12

connectors, for a total of 18 to 36 ports.) It provides termination for optical cables on the premises or in a

central office.

The shelf is constructed of 16 AWG steel housing and is compact and rugged enough for commercial

applications. Its powder coating finish is corrosion resistant.

Since the shelf is only one rack unit (1U) high and has front access, testing, removing, adding, or replacing a

modular adapter panel is easy. It’s ideal for fiber installations where rack space is limited. The shelf has two

openings in the back for cable access and a rear bar that supports cable ties.

A cable routing spool provides storage for excess length of cables.

Your package should include the following items. If anything is missing or damaged, please contact Black Box

at 724-746-5500.

• (1) Rackmount Fiber Shelf, 18-Port, 1U

• (4) 10⁄32 cup-head screws

• (4) 12⁄24 cup-head screws

• (4) 4-inch (10.2-cm) cable ties

• (30) 3-inch (7.6-cm) cable ties

• (1) red “danger” sticker that warns you of laser hazard

• (6) 1" (2.5-cm) stick-on rectangular cable holders

• (1) pair of black spool rings for cable management

• This users’ manual

3. Installation

DANGER

Do not view the fiber ends if the laser is illuminated. Eye damage may result. An

unmated connector may emit invisible laser radiation. Visually test with white light

only!

1. The shelf is shipped with two screws installed on the sides for the front rackmounting position. Either

keep these in this position or move them to the middle or back positions to suit your application.

2. Using the included 10⁄32 or 12⁄24 cup-head screws, mount the shelf in a 19" or 23" rack.

3. Pull the button on the front right of the shelf to release the tray.

4. Install the fiber adapters in the three slots on the pull-out tray. See the illustration below.

NOTE

The shelf supports three 6- or 12-port fiber adapters. One or two splice trays (part

number RM440A, not included) are optional. Two splice trays support a total of up to

36 fibers.

5. Route multipair distribution fiber cable through the opening in the back of the shelf.

6. Once you pull the cable through the opening in the shelf, use the cable ties and black spool rings to hold

the cable in place inside the shelf.

7. Use the included 3" and 4" cable ties to secure the cable to the back plate.

8. Attach the “danger” sticker (see the DANGER note above) to the outside top of the shelf.

Figure 1. Rackmount Fiber Shelf with tray open.

RACKMOUNT FIBER SHELF, 3-ADAPTER, 1U

9. Terminate the multi-pair fiber cable and connect to the fiber adapters. See Figure 2.

Figure 2. Wiring diagram.

(3) 6-panel fiber

adapters shown in this

diagram

Indice

Altri manuali Black Box Rack e supporto

Black Box

Black Box RM7006 Manuale utente

Black Box

Black Box RM110A Manuale utente

Black Box

Black Box RM260 Manuale utente

Black Box

Black Box EMD4000-RMK1 Manuale utente

Black Box

Black Box Freedom Rack Plus Manuale utente

Black Box

Black Box WMD12-2425-PQU Manuale utente

Black Box

Black Box RMS1924F Manuale utente

Black Box

Black Box RM044 Manuale utente

Black Box

Black Box RM220A Manuale utente

Black Box

Black Box RM390A-R2 Manuale utente

Black Box

Black Box RMT701 Manuale utente

Black Box

Black Box NetRack RM500A-R2 Manuale utente

Black Box

Black Box WMD-24PMOUNT-U Manuale utente

Black Box

Black Box RM069A Manuale utente

Black Box

Black Box RM970A Manuale utente

Black Box

Black Box RMK19K Manuale utente

Black Box

Black Box ServCenter RF535A Manuale utente

Black Box

Black Box RM490A-R2 Manuale utente

Black Box

Black Box Rackmount Computer Monitor Mount Manuale utente

Black Box

Black Box RMT385 Manuale utente

Black Box

Black Box Elite Plus RM969A Manuale utente

Black Box

Black Box ServCenter RF500A Manuale utente

Black Box

Black Box MT160A Manuale utente

Black Box

Black Box Agility Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente