Black Box LES1516A Manuale utente

Securely manage data center and network

equipment from anywhere in the world.

Secure Server with Cisco®Pinout

Customer

Support

Information

LES1516A

LES1532A

LES1548A

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax

724-746-0746 • www.blackbox.com • [email protected]

To download the user manual, this quick start guide, and software from

the Web site:

1. Go to www.blackbox.com

2. Enter the product code (LES1516A, LES1532A, LES1548A) in the search box:

3. Click on the “Resources” tab on the product page, and select the document

you wish to download.

Page 2 724-746-5500 | blackbox.com

Secure Server with Cisco Pinout Quick Start Guide

This Quick Start Guide walks you through the installation, configuration, and local

operation of the Secure Server with Cisco®Pinout (LES1516A, LES1532A, or

LES1548A).

The user manual/installation guide can be downloaded from the Black Box Web site.

To download a manual from the Web site:

1. Go to www.blackbox.com

2. Enter the part number (LES1516A, LES1532A, LES1548A) in the search box:

3. Click on the “Resources” tab on the product page, and select the document you

wish to download.

If you have any trouble accessing the Black Box site to download the manual, contact

our Technical Support at 724-746-5500 or [email protected].

STEP 1: Check the kit contents.

Your package should include the following items. If anything is missing or damaged,

contact Black Box Technical Support at 724-746-5500 or [email protected].

• Secure Serial Server with Cisco Pinout (16-, 32-, or 48-Port)

• (2) UTP cables

• (2) DB9F-to-RJ-45 adapters

• (1) power cables

• This printed quick start guide

STEP 2: Connect the hardware.

2A: Power on the console server. It has a universal AC power supply built in that

plugs into an AC outlet.

2B: Connect the NET1 port on the console server to your network.

NOTE: NET2 can connect to a secondary network, e.g. a segregated management

LAN, or to the WAN via an external access device for broadband out-of-band

(OoB). Alternatively, it can connect to same primary network as NET1 for

redundancy. If you plan to use NET2, you can also connect it now.

2C: Connect your serial devices to the serial ports numbered 1–16/32/48.

Page 3

724-746-5500 | blackbox.com

Secure Server with Cisco Pinout Quick Start Guide

STEP 3: Set up the console server

The console server’s default IP address is 192.168.0.1 (subnet mask 255.255.255.0).

With a Web browser on any computer that is connected to the console server via

LAN, follow the steps listed below.

3A: Enter https://192.168.0.1 into the address bar

3B: Log in using the default system user name root and the default password.

AWelcome screen listing the basic configuration steps is displayed

NOTE: The computer must have an IP address in the same network range

(192.168.0.x) as the console server. Alternatively, you can use the arping

command to set the IP address (refer to the User Manual for details). The

console server also has DHCP client enabled by default. It will automatically

accept any network IP address assigned by any DHCP server on your network,

and will then respond at both 192.168.0.1 and its DHCP address.

3C: Select “Serial & Network: Users & Groups” and Edit the Root User, enter and

confirm a new password, and click “Apply.”

3D: Select System: IP then Network Interface and check DHCP or Static for

Configuration Method.

Page 4 724-746-5500 | blackbox.com

Secure Server with Cisco Pinout Quick Start Guide

Figure 1. IP Settings: Network screen.

The second network port (NET2) is inactive by default. It can be set up for failover/

OoB access (refer to the User Manual) or as a management LAN gateway. To activate:

3E: Select the Management LAN Interface and uncheck “Disable.”

3F: Enter the IP Address and Subnet Mask for this segment of the Management LAN

(leaving Gateway and DNS fields blank)—refer to the User Manual if you wish to

enable the DHCP server or change default firewall/router settings.

NOTE: The console server’s firewall determines which protocols and services can be

used to access which ports and devices. By default only HTTPS and SSH

access is enabled to the console server itself. Use the Service Access menu on

System: Services to change settings for the console server itself (and for

connected serial ports). Similarly, using the Forwarding & Network menu on

System: Firewall, you can permit IP access between devices on a Network or

Management LAN.

Page 5

724-746-5500 | blackbox.com

Secure Server with Cisco Pinout Quick Start Guide

Figure 2. Service Settings.

Alternatively, to use NET2 as a redundant connection sharing the same network

settings as NET1:

3E: Select System: IP, choose an Interface Aggregation method and click Apply

STEP 4: Configure serial and USB devices.

NOTE: Most RJ-45 serial devices connect to the console server using a straight UTP

patch cable. DTE DB9M and DCE DB9M serial devices connect to the console

server using the included adapters. For a list of cabling instructions for

common devices, contact Black Box Technical Support at 724-746-5500 or

[email protected].

4A: Select “Serial & Network: Serial Port” to display the labels, modes, and protocol

options currently set for each serial port. By default, all serial ports are set in Console

Server mode (refer to the User Manual if other modes are required). To configure a

serial port, click Edit:

• Configure the Common Settings (Baud Rate, Parity, Data Bits, Stop Bits, and Flow

Control) to match those of the device being controlled.

Page 6 724-746-5500 | blackbox.com

Secure Server with Cisco Pinout Quick Start Guide

• Select the Console Server protocols (SSH, Telnet, Web Terminal, and RFC2217) that

are to be used for the network connection to that port.

• A Logging Level may also be set to specify the direction and level of information to

be logged for that port.

• Click “Apply.”

4B: Your console server has two USB 3.0 ports on the front, which can be used for

connecting to USB consoles (on UPS supplies or Cisco® devices) or for attaching

external USB flash for loading updated firmware or configuration files.

STEP 5: Add local users and groups.

NOTE: Alternatively, if you wish to use a remote AAA server to authenticate user

access, refer to the User Manual.

5A: For each new user, select “Serial & Network: Users & Groups” and click “Add

User.”

5B: Enter a Username and enter and confirm a Password, and select the Accessible

Ports the user is allowed to access.

5C: To grant limited access to the console server’s management UI and CLI, check

the user Group, to grant full access to the console server’s management UI and CLI,

check the admin Group (by default the user is granted no management access), click

Apply

NOTE: We recommend that you set up a new administrator user (in the admin group

with full access privileges) and login as this new user for all ongoing administration

functions (rather than continuing as root).

Page 7

724-746-5500 | blackbox.com

Secure Server with Cisco Pinout Quick Start Guide

Figure 3. Add a New user.

STEP 6: Access device consoles.

Your console server is now ready to serve console access on your network. There are

many ways to access device consoles, depending on the protocols chosen.

6A: SSH – for console access using your preferred SSH client (e.g. PuTTY, SecureCRT,

OpenSSH):

• To connect to the pmshell chooser menu, SSH to the console server and login

appending :serial to your username, e.g.: root:serial

• To connect directly to a given console, SSH to the console server and login adding

the port number or port label to your username, e.g.: root:port02 or

root:MyRouter

• To connect directly to a given serial port, SSH to the console server at TCP port

3000 + the port number, e.g.: 3002 for serial port 2

Page 8 724-746-5500 | blackbox.com

Secure Server with Cisco Pinout Quick Start Guide

6B: Telnet – Telnet to the console server at TCP port 2000 + the port number, e.g.:

2002 for serial port 2.

6C: Web Terminal – for console access using just your browser, select Manage:

Devices: Serial and click the port’s Web Terminal link.

STEP 7: Advanced configurations.

The console server offers many more advanced functions including:

• The Alerts & Logging: Auto-Response facility monitors serial ports, hosts, user

logins, UPSes (Uninterruptible Power Supplies), RPCs (Remote Power Controllers,

such as PDUs and IPMI devices), and EMDs (Environmental Monitoring Devices). A

broad selection of Check Conditions (such serial data patterns, temperature, or

battery levels) can be specified. When triggered, one or more Trigger Actions are

performed, e.g. a warning email, SMS, Nagios, and/or SNMP alert is sent to a

nominated destination.

• Extensive management of UPSes and RPCs using open source NUT and Powerman

tools. The Manage: Power and pmshell Power Menu facility enables both

administrators and regular users to monitor and control attached PDU power strips,

and servers with embedded IPMI BMCs.

• Connect EMDs to any serial port (with an adapter) and remotely monitor the

temperature, humidity, physical access, smoke alarms, etc. Details are provided in

the Quick Start supplied with the EMD.

• Historical logs of all communications with serial and network attached devices,

system activity, UPS and PDU power status, environmental status, etc. Alerts &

Logging: Port Log allows this history to be saved locally or remotely. Logs can be

viewed from the Status and Manage menus.

Other advanced features, such as remote Authentication, Firewall, VPN, Serial Port

Cascading, and Command Line interface, are covered in detail in the User Manual.

Page 9

724-746-5500 | blackbox.com

NOTES

Page 10 724-746-5500 | blackbox.com

NOTES

Altri manuali per LES1516A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Black Box Server

Black Box

Black Box 37687 Manuale utente

Black Box

Black Box CDUNM10 Manuale utente

Black Box

Black Box 16-Port Rackmount 10/100 Manuale utente

Black Box

Black Box Industrial Ethernet Serial Server LES401A... Manuale utente

Black Box

Black Box Terminal Server Manuale utente

Black Box

Black Box LES1108A Manuale utente

Black Box

Black Box RAS-PutIn Manuale utente

Black Box

Black Box ServView II Manuale utente

Black Box

Black Box 40870-R2 Manuale utente

Black Box

Black Box iCOMPEL ICC LG WEBOS 3 Manuale utente

Black Box

Black Box LES1202A Manuale utente

Black Box

Black Box LES1516A Manuale utente

Black Box

Black Box LES1102A Manuale utente

Black Box

Black Box LES4011 Manuale utente

Black Box

Black Box les1208A Manuale utente

Black Box

Black Box ServShield RM470A-R2 Manuale utente

Black Box

Black Box LES2700A-SSS Manuale utente

Black Box

Black Box LES1208A-R2 Manuale utente

Black Box

Black Box ServTray KVT201A-JP-R3 Manuale utente

Black Box

Black Box RM5000A-R3 Manuale utente

Black Box

Black Box LWS401A Manuale utente

Black Box

Black Box LS1016A Manuale utente

Black Box

Black Box LES301A-KIT Manuale utente

Black Box

Black Box LES290A Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente