BLT M880 Manuale utente

Product Information

zProduct Model: M880

zProduct Name: Patient monitor

zManufacturer: Guangdong Biolight Meditech Co., Ltd.

zAfter Service Contact Information:

Address: No.2 Innovation First Road, Technical

Innovation Coast, Hi-tech Zone, Zhuhai ,

P.R.China

Fax: +86-756-3399919

Postcode: 519085

Toll-free consultation hot line: +86-400-8818-233

Revision History

This manual has a revision number. This revision

number changes whenever the manual is updated due to

software or technical specification change. Contents of this

manual are subject to change without prior notice.

zDocument No.: J/M880-I-005

zRevision number: V1.0

zRelease time: Oct.2016

Statement

Manufacturer holds the copyright of this manual, and we

are also entitled to deal with this manual as confidential files.

This manual is only used for operation, maintenance and

service of product, someone else can not publish the manual.

This manual contains exclusive information protected by

approval of manufacturer no parts of this manual shall be

photocopied, xeroxed or translated into other languages.

The contents contained in this manual are subject to

amendments without notification.

Manufacturer's Responsibility

Only under the following circumstances will

manufacturer be responsible for the safety, reliability and

performance of the instrument:

zAll the installation, expansion, readjustment,

renovation or repairs are conducted by the personnel

certified by manufacturer.

zThe storage condition, operation condition and

electrical status of the instrument conforms to the

product specification.

zThe instrument is used in accordance with the user’s

manual.

III

About this manual

This manual contains the instructions necessary to

operate the product safely and in accordance with its

function and intended use. Observance of this manual is a

prerequisite for proper product performance and correct

operation and ensures patient and operator safety.

This manual is based on the maximum configuration and

therefore some contents may not apply to your product. If

you have any question, please contact us.

This manual is an integral part of the product. It should

always be kept close to the equipment so that it can be

obtained conveniently when needed.

All illustrations in this manual serve as examples only.

They may not necessarily reflect the setup or data displayed

on your product.

Conventions:

zBold Italic text is used in this manual to quote

the referenced chapter or sections.

z【】is used to enclose screen texts.

z→is used to indicate operational procedures.

Signs in this manual:

Warning: Indicates a potential hazard or unsafe

practice that, if not avoided, will result in death or

serious injury.

Caution: Indicates a potential hazard or unsafe

practice that, if not avoided, could result in minor

personal injury or product/property damage.

Note: Provides application tips or other useful

information to ensure that you get the most from

your product.

)

Contents

Chapter 1 General Introduction...........................................1-1

1.1Intended Use ..............................................................1-1

1.2Main Unit...................................................................1-1

1.3Display Views............................................................1-6

Chapter 2 Safety.....................................................................2-1

2.1Safety Information.....................................................2-1

2.2Explanation of Symbols ............................................2-5

Chapter 3 Basic Operations..................................................3-1

3.1Unpacking and Checking ..........................................3-1

3.2Getting Started...........................................................3-1

3.3Starting the Monitor ..................................................3-2

3.4Screen Brightness Setting..........................................3-3

3.5Auto-Rotate Setting...................................................3-3

3.6Date & Time Setting..................................................3-3

3.7Patient Information Setting .......................................3-4

3.8Demo Mode Setting...................................................3-5

3.9Language Setting .......................................................3-5

3.10Checking the Version ................................................3-6

3.11Restoring the Factory Configuration.........................3-6

3.12Shutting off the Monitor............................................3-6

Chapter 4 Alarm ....................................................................4-1

4.1Alarm Categories.......................................................4-1

4.2Alarm Levels .............................................................4-2

4.3Alarm Indicators ........................................................4-3

4.4Alarm Status Symbol.................................................4-6

4.5Alarm Tone Configuration ........................................4-6

4.6Pausing Alarms ..........................................................4-7

4.7Shutting off the Alarm Volume..................................4-8

4.8Alarm Reset ...............................................................4-9

4.9When an Alarm Occurs .............................................4-9

Chapter 5 Measuring CO2....................................................5-1

5.1Introduction ...............................................................5-1

5.2Safety Information.....................................................5-1

5.3Monitoring Procedure................................................5-2

5.4CO2 Display ..............................................................5-6

5.5Respiratory Rate ........................................................5-7

5.6Setting CO2 ...............................................................5-7

5.7CO2 Zero .................................................................5-10

5.8Calibration ...............................................................5-11

5.9Removing Exhaust Gases from the System ............5-12

Chapter 6 Measuring SpO2..................................................6-1

6.1Introduction ...............................................................6-1

6.2Safety Information.....................................................6-2

VII

6.3Monitoring Procedure................................................6-4

6.4SpO2 Display.............................................................6-5

6.5PR Display.................................................................6-6

6.6Setting SpO2..............................................................6-7

6.7Setting Desat Limit....................................................6-8

Chapter 7 Trend Review .......................................................7-1

7.1Introduction ...............................................................7-1

7.2Review Interface........................................................7-1

7.3Review Setup.............................................................7-2

Chapter 8 Battery ..................................................................8-1

8.1Introduction ...............................................................8-1

8.2Charging the Battery..................................................8-2

8.3Optimizing Battery Performance ..............................8-2

8.4Checking the Lithium Battery ...................................8-3

8.5Disposing of the Batteries .........................................8-4

Chapter 9 Maintenance and Cleaning.................................9-1

9.1Introduction ...............................................................9-1

9.2Seasonal Safety Checking .........................................9-2

9.3Cleaning the Monitor.................................................9-4

9.4Cleaning SpO2 Sensor...............................................9-5

9.5Disposal .....................................................................9-5

Chapter 10 Accessories........................................................10-1

VIII

Appendix A Product Specifications.........................................1

A.1 Safety Specifications ..................................................... 1

A.2 Physical Specifications.................................................. 1

A.3 Environmental Specifications........................................ 2

A.4 Charging Specifications................................................. 2

A.5 Hardware Specifications................................................ 3

A.6 Data Storage .................................................................. 4

A.7 Measurement Specifications.......................................... 5

Appendix B Factory Defaults ..................................................9

B.1 Alarm Setup ................................................................... 9

B.2 System Setup.................................................................. 9

B.3 CO2 Setup.................................................................... 10

B.4 SpO2 Setup .................................................................. 10

B.5 Trend Setup .................................................................. 10

Appendix C Alarm Message .................................................. 11

C.1 Physiological Alarm..................................................... 11

C.2 Technical Alarm ........................................................... 12

C.3 Prompt Message........................................................... 14

Appendix D EMC....................................................................15

Appendix E Warranty Registration Card............................16

Patient Monitor User’s Manual

1-1

Chapter 1 General Introduction

1.1 Intended Use

M880 patient monitor is intended for continuously

monitoring or spot checking of CO2, RR, SpO2 and PR signals

of single adult, pediatric and neonatal patient.

This device can be used in institutions or units with health

care capability. For instance, outpatient departments, emergency

rooms and departments of internal medicine in hospitals, and

ordinary departments in clinics, nursing hospitals and medical

institutions for communities.

1.2 Main Unit

1.2.1 Front View

Pat

Fig 1

1. Alarm indicat

When an alar

below:

zHigh level

zMedium l

zLow leve

flashing.

2. Display scree

Monitor User’s Manual

1-2

1 Front View of the Monitor

ng lamp

occurs, this lamp will light up

alarm: the lamp quickly flashes r

vel alarm: the lamp slowly flashe

alarm: the lamp lights yello

as defined

yellow.

without

Indice

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente