Bosch FlexiDome NDN-498V03-21P Manuale utente

FlexiDome2X IP Camera

NDN-498

en Installation and Operation Manual

FlexiDome2X IP Camera Table of Contents | en 3

Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06

Table of Contents

1Safety 8

1.1 Safety precautions 8

1.2 Important safety instructions 9

1.3 Connection in applications 10

1.4 FCC & ICES compliance 11

1.5 UL certification 13

1.6 Bosch notices 14

1.7 Copyrights 15

2 Introduction 16

2.1 Features 16

3 System Information 18

3.1 Overview of functions 18

3.1.1 Progressive scan 18

3.1.2 Day/Night function 18

3.1.3 Wide dynamic range 18

3.1.4 Tri-streaming 19

3.1.5 ONVIF (Open Network Video Interface Forum) 19

3.1.6 Audio 19

3.1.7 Alarm I/O 19

3.1.8 Tamper detection and motion detectors 19

3.1.9 Video encoding 19

3.1.10 Multicast 19

3.1.11 Power-over-Ethernet 20

3.1.12 Encryption 20

3.1.13 Receiver 20

3.1.14 Recording 20

3.1.15 Snapshots 20

3.1.16 Backup 20

3.1.17 Configuration 20

3.2 Operation with external systems 22

4en | Table of Contents FlexiDome2X IP Camera

AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

4 Planning 24

4.1 Unpacking 24

4.2 System requirements 25

4.3 Install players 26

5 Installation 27

5.1 Disassembly 27

5.1.1 Surface mount version 27

5.1.2 Flush mount version 28

5.2 Mounting the unit 29

5.2.1 Surface mount 30

5.2.2 Flush mount 31

5.2.3 Make the connections 32

5.2.4 Indication LED 34

5.2.5 Reset button 34

5.2.6 Mount the camera 34

5.3 Camera positioning 35

5.3.1 Focal length and focus 36

5.3.2 Closing the unit 37

6 Camera set-up 38

6.1 Camera menu navigation 38

6.2 Install menu 39

6.2.1 Pre-defined modes 39

6.2.2 Network submenu 41

6.2.3 Defaults submenu 41

6.2.4 Lens Wizard submenu 42

6.3 Day/Night switching 42

7 Browser connection 43

7.1 System requirements 43

7.2 Establishing the connection 44

7.2.1 Password protection in camera 44

7.3 Protected network 44

7.4 Connecting to a hardware decoder 45

FlexiDome2X IP Camera Table of Contents | en 5

Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06

7.4.1 Alarm connection 45

7.5 Connection established 46

7.5.1 LIVEPAGE 46

7.5.2 RECORDINGS 46

7.5.3 SETTINGS 46

8 Basic Mode 48

8.1 Basic Mode menu tree 48

8.2 Device Access 49

8.2.1 Camera name 49

8.2.2 Password 49

8.3 Date/Time 50

8.4 Network 51

8.5 Encoder Profile 52

8.6 Audio 52

8.7 Recording 52

8.7.1 Storage medium 52

8.8 System Overview 52

9 Advanced Mode 53

9.1 Advanced Mode menu tree 53

9.2 General 55

9.2.1 Identification 55

9.2.2 Password 55

9.2.3 Date/Time 56

9.2.4 Display Stamping 58

9.3 Web Interface 60

9.3.1 Appearance 60

9.3.2 LIVEPAGE Functions 61

9.3.3 Logging 62

9.4 Encoder 63

9.4.1 Privacy Masks 63

9.4.2 Encoder Profile 63

9.4.3 Encoder Streams 67

9.5 Audio 68

9.6 Camera 69

6en | Table of Contents FlexiDome2X IP Camera

AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

9.6.1 Mode 69

9.6.2 ALC 70

9.6.3 Shutter/AGC 71

9.6.4 Day/night 72

9.6.5 Enhance 73

9.6.6 Color 74

9.6.7 Installer Options 75

9.7 Recording 77

9.7.1 Storage Management 77

9.7.2 Recording Profiles 80

9.7.3 Retention Time 81

9.7.4 Recording Scheduler 82

9.7.5 Recording Status 83

9.8 Alarm 84

9.8.1 Alarm Connections 84

9.8.2 Video Content Analyses (VCA) 87

9.8.3 VCA configuration- Profiles 88

9.8.4 VCA configuration - Scheduled 94

9.8.5 VCA configuration - Event triggered 96

9.8.6 Audio Alarm 97

9.8.7 Alarm E-Mail 98

9.8.8 Alarm Task Editor 100

9.9 Interfaces 101

9.9.1 Alarm input 101

9.9.2 Relay 101

9.10 Network 103

9.10.1 Network 103

9.10.2 Advanced 107

9.10.3 Multicasting 108

9.10.4 JPEG Posting 109

9.10.5 Encryption 110

9.11 Service 111

9.11.1 Maintenance 111

9.11.2 Licenses 113

9.11.3 System Overview 113

FlexiDome2X IP Camera Table of Contents | en 7

Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06

10 Operation via the browser 114

10.1 Livepage 114

10.1.1 Processor load 114

10.1.2 Image selection 115

10.1.3 Digital I/O 115

10.1.4 System Log / Event Log 115

10.1.5 Saving snapshots 115

10.1.6 Recording video sequences 115

10.1.7 Running recording program 116

10.1.8 Audio communication 116

10.2 Recordings page 117

10.2.1 Controlling playback 117

11 Troubleshooting 119

11.1 Function test 119

11.2 Resolving problems 120

11.3 Customer service 122

12 Maintenance 123

12.1 Testing the network connection 123

12.2 Repairs 123

12.2.1 Transfer and disposal 123

13 Technical Data 124

13.1 Specifications 124

13.1.1 Dimensions 127

13.1.2 Accessories 129

Glossary 130

8en | Safety FlexiDome2X IP Camera

AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

1Safety

1.1 Safety precautions

DANGER!

High risk: This symbol indicates an imminently hazardous

situation such as "Dangerous Voltage" inside the product.

If not avoided, this will result in an electrical shock, serious

bodily injury, or death.

WARNING!

Medium risk: Indicates a potentially hazardous situation.

If not avoided, this could result in minor or moderate bodily

injury.

CAUTION!

Low risk: Indicates a potentially hazardous situation.

If not avoided, this could result in property damage or risk of

damage to the unit.

FlexiDome2X IP Camera Safety | en 9

Bosch Security Systems Installation and Operation Manual AR18-10-B006 | v1.1 | 2010.06

1.2 Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Follow all warnings on the unit and in the

operating instructions before operating the unit.

1. Clean only with a dry cloth. Do not use liquid cleaners or

aerosol cleaners.

2. Do not install unit near any heat sources such as radiators,

heaters, stoves, or other equipment (including amplifiers)

that produce heat.

3. Never spill liquid of any kind on the unit.

4. Take precautions to protect the unit from power and

lightning surges.

5. Adust only those controls specified in the operating

instructions.

6. Operate the unit only from the type of power source

indicated on the label.

7. Unless qualified, do not attempt to service a damaged unit

yourself. Refer all servicing to qualified service personnel.

8. Install in accordance with the manufacturer's instructions

in accordance with applicable local codes. Use only

attachments/accessories specified by the manufacturer.

Equipment change or modification could void the user's

guarantee or authorization agreement.

10 en | Safety FlexiDome2X IP Camera

AR18-10-B006 | v1.1 | 2010.06 Installation and Operation Manual Bosch Security Systems

1.3 Connection in applications

Power lines: An outdoor system should not be located in the

vicinity of overhead power lines, electrical lights, or power

circuits, or where it may contact such power lines or circuits.

When installing an outdoor system, extreme care should be

taken to keep from touching power lines or circuits, as this

contact may be fatal.

U.S.A. models only - refer to the National Electrical Code Article

820 regarding installation of CATV systems.

12 VDC / 24 VAC power source: This unit is intended to

operate with a limited power source. The unit is intended to

operate at either 12 VDC or 24 VAC (if PoE is not available).

User supplied wiring must be in compliance with electrical

codes (Class 2 power levels). If 24 VAC is used, do not ground

the 24 VAC supply at the terminals or at the unit's power supply

terminals.

PoE: Use only approved PoE devices. Power-over-Ethernet can

be connected at the same time as a 12 VDC or 24 VAC power

supply.

Earth connection: The unit must be connected to earth.

Connection: The unit has connection terminals on flying leads.

In wet or outdoor installations make use of a field wiring box

and cable conduit with Nema3 or IP55 protection level or

better. Make the connections inside the water tight

compartment. After connections are made ensure that the

watertight compartment is tightly closed and cables and

conduits are properly sealed to prevent ingress of water.

CAUTION!

The Low Voltage power supply unit must comply with EN/UL

60950. The power supply must be a SELV-LPS unit or a SELV -

Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

Altri manuali per FlexiDome NDN-498V03-21P

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Bosch Telecamera IP

Bosch

Bosch NDN-265-PIO Manuale utente

Bosch

Bosch DINION IP imager 9000 HD Manuale del proprietario

Bosch

Bosch NDC-265-P Manuale utente

Bosch

Bosch Flexidome IP 4000i Manuale utente

Bosch

Bosch NBC-255-P Manuale utente

Bosch

Bosch NWC-0455-20P Manuale utente

Bosch

Bosch MicroDome NDC-274-PT Istruzioni per l’uso

Bosch

Bosch NEC-070V09-21W Manuale utente

Bosch

Bosch DINION IP starlight 8000 MP Manuale utente

Bosch

Bosch NBC-225-P Manuale utente

Bosch

Bosch FLEXIDOME IP panoramic 6000 IC Manuale utente

Bosch

Bosch NBC-225-P Manuale utente

Bosch

Bosch MIC-7130 Manuale utente

Bosch

Bosch NDN-921 Guida all'installazione

Bosch

Bosch MegaPixel NWC-0800 Manuale utente

Bosch

Bosch MIC-7130 Manuale utente

Bosch

Bosch 200 Series Manuale utente

Bosch

Bosch NDN-265-PIO Istruzioni per l’uso

Bosch

Bosch A1 Security Cameras IR Illuminator 5000... Manuale di installazione e funzionamento

Bosch

Bosch NDC-225-PI Manuale utente

Bosch

Bosch NWC?0495 Manuale utente

Bosch

Bosch NBC-455 Manuale utente

Bosch

Bosch NEC-070V09-21W Manuale utente

Bosch

Bosch Infrared Imager EX80 Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente