BRAYER BR4955 Manuale utente
Instruction manual
Инструкция по эксплуатации
Fan BR4955
Вентилятор BR4955
brayer.ru
СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................12
RU ...................................................................................................................................21
KZ....................................................................................................................................30
3
EN
FAN BR4955
The fan is intended for articial ventilation of the
room.
DESCRIPTION
1. Base
2. Body
3. Outgoing Airow Grill
4. Indication panel/display
5. Control panel
6. Carrying Handle
7. Air-Inlet Grill
Control Panel
8. On/O button « »
9. Air ow speed selection button « »
10. Fan body oscillation on/o button « »
11. Timer on/o button « »
12. Airow type selection button « »
13. Decorative and operation mode indicators on/o
button « »
Indication panel
14. Display
EN
15. Decorative light indicators
16. Low air ow speed indicator « »
17. Medium air ow speed indicator « »
18. Maximal air ow speed indicator « »
19. «Breeze» air ow type indicator « »
20. «Normal» air ow type indicator « »
21. «Night» mode indicator « »
Remote control
22. On/O button « »
23. Airow type selection button « »
24. Airow speed selection button « »
25. Oscillation Mode On/O button « »
26. Timer On/O button « »
27. Decorative and operation mode indicators on/o
button « »
28. Remote Control
29. Battery Holder
4
EN
1
2
3
7
8 9 15
10 11 14
22
23 24
25 26
28
29
27
12 13
16
17
18
19
20
21
4
5 6
5
EN
Рiс. 1 Рiс. 2
Рiс. 3
6
EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation manual carefully before using
the fan; after reading, keep it for future reference.
• Use the unit for its intended purpose only, as it is
stated in this manual.
• Mishandling the unit can lead to its breakage and
cause harm to the user or damage to the user’s
property, which is not covered by warranty.
• Do not use the power cord as a carrying handle for
the fan.
• Do not wind the power cord around the fan body.
• Provide that the power cord does not contact with hot
surfaces and sharp furniture edges.
• Protect the unit from impacts, falling, vibrations and
other mechanical stress.
• Avoid blocking the air inlet grid of the fan with foreign
objects, do not cover the unit during the operation.
• Do not use the unit in places where inammable
liquids are used or aerosols are sprayed, do not use
the unit in the places where such liquids are stored.
• Do not use the unit near heating appliances, heat
sources or open ame.
• Do not use the unit outdoors, in bathrooms or in
places with high humidity.
• Do not use the unit in proximity to the kitchen sink,
near swimming pools or other containers lled with
water.
• If the unit is dropped into water, unplug it
immediately, and only then you can take the unit out
of water. Apply to the authorized service center for
testing or repairing the unit.
• Do not touch the unit body, the power cord and the
power plug with wet hands.
• It is not recommended to use the unit during lightning
storms.
• Do not block the fan grids and do not insert foreign
objects onto them.
ATTENTION! A lithium battery is used in the remote
control. To avoid danger, do not allow children to play
with the battery. If your child swallowed a battery,
immediately see your doctor.
• Make sure that the operating voltage of the unit
indicated on the label corresponds to your home
mains voltage.
• Place the fan vertically on a at dry moisture- and
heat-resistant surface, do not place it horizontally and
do not turn it over.
• Do not place the fan on soft surfaces, such as
carpets with high pile, sofas or beds.
• Do not place the fan near curtains and do not direct it
to house plants.
• Do not use the fan in a limited space, for example, in
built-in cabinets or wall niches.
• It is not recommended to stay in the zone of the air
ow from the fan for a long period of time, especially
for children and the elderly.
7
EN
• Never leave the unit connected to the mains
unattended.
• Unplug the unit after usage or before cleaning.
• Switch the fan o and unplug the power cord plug
from the mains socket.
• When unplugging the unit, hold the power plug and
carefully remove it from the mains socket, do not pull
the power cord, as this can lead to its damage or
cause a short circuit.
• Do not immerse the unit into water or any other
liquids.
• If water droplets fall on the fan body, switch it o and
disconnect the power plug from the mains before
touching the unit, then wipe the fan body with a dry
cloth.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging lm. Danger of
suocation!
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The device is not intended to be used by people
(including children) with physical, sensory,
psychological, or mental disabilities, or lacking
experience or knowledge, if they are not under the
supervision of or have not been instructed on the
usage of the device by the person responsible for
their safety.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualied personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent them
using the device as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
8
EN
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
ASSEMBLING THE FAN
• The fan is delivered with a disassembled base (1).
Do not switch the fan on without the base (1).
• Use a crosshead or at tip screwdriver (not supplied)
to assemble the base (1).
• Position the fan body (2) horizontally.
• Assemble the Base (1): join the two halves of the
Base (1) (g. 1) and secure them using 4 screws.
• Using the 4 screws, attach the Base (1) to the lower
part of the body (2) (g. 2).
• Place the fan vertically on the base (1).
Remote control (28)
ATTENTION! A lithium battery is used in the remote
control. To avoid danger, do not allow children to
play with the battery. If your child has swallowed
a battery, immediately see a doctor. Battery
installation/replacing (pic. 3)
• Press on the clamp and remove the battery holder
(29) from the remote
• control (28) body, insert a CR2025 battery (supplied
with the unit) into the holder, strictly following the
polarity.
• Install the battery holder (29) into the remote control
(28).
Notes:
- if there is an isolation insert in the battery holder
(29), remove the insert;
- replace the battery in time;
- do not recharge the lithium battery;
- remove the battery if you are not planning to use
the unit for a long time;
- remove the used battery from the remote control
(28) and dispose of it.
• When you use the remote control, direct it to the front
part of the fan body (2).
• The distance between the remote control and the fan
should not exceed 5 m, the coverage angle should
be up to 30 degrees.
9
EN
• Avoid exposing the receiver to direct sunlight,
otherwise false activation of control commands is
possible.
USING THE FAN
• Use the handle (6) to carry the fan.
• Place the fan base (1) on a at, dry and steady
surface.
• Do not place the fanon soft surfaces, such as carpets
with high pile, sofas or beds.
• Insert the Power Cable (7) plug into the mains.
Switching the fan on/o and selecting the airow
speed
Notes:
- the buttons on the control panel (5) are sensory,
you just need to touch the button to switch the
necessary operation mode on;
- each pressing of buttons on the control panel (5)
or on the remote control (28) is accompanied with
a sound signal.
• To switch the fan on, press the button (8) « » on
the control panel (5) or the button (22) « » on the
remote control (28), you will hear a sound signal and
the fan will switch on at a medium air ow speed,
the decorative indicators (15) and the medium air
ow speed indicator (17) « » will light up on the
indication panel (4).
• Pressing the button (9) « » on the control panel (5)
or the button (24) « » on the remote control (28) you
can select the air ow speed, the indicators (16, 17,
18) « , , » will appear on the indication panel (4).
• - indicator (16) « », low air ow speed;
• - indicator (17) « », medium air ow speed;
• - indicator (18) « », maximal air ow speed.
• To switch the fan o, press the button (8) « » on the
control panel (5) or press the button (22) « » on the
remote control (28). The fan will switch o and after
that you can unplug the unit.
Switching the fan body oscillation on/o
• To turn the oscillation mode on, press the « » button
(10) on the Control Panel (5) or the « » button (25)
on the Remote Control (28), to turn o the oscillation
mode, press the « » button (10) on the Control Panel
(5) or the « » button (25) on the Remote Control
(28).
Fan operation time timer
• To set the operating time of the fan, press the « »
button (11) on the Control Panel (5) or the « » button
(26) on the Remote Control (28) button you will hear a
sound signal, and the Timer operation time will appear
on the Display (14) «1H».
10
EN
• Press again the buttons (11 or 26) to set the timer
operation time. Timer operation time can be set from 1
hour to 8 hours with 1 hour setting step.
• To switch the timer o, repeatedly press the button (11
or 26) until the timer operation symbols on the display
(14) go out.
Air ow type selection button
• By pressing the button (12) « » on the control panel
(5) or the button (23) « » on the remote control (28),
you can select the type of air ow, the type of air ow is
displayed on the display panel (4) by the indicators (19,
20, 21) « , , ».
- indicator (19) « », «breeze»; the air ow speed is
chaotically changing: from soft breeze to strong gust
of wind.
- indicator (20) « », «normal air ow», the air ow
speed can be changed by pressing the buttons (9
or 24);
- indicator (21) « », «night» mode, the air ow speed
increases and decreases gradually.
Decorative and operation mode indicators on/o
button
• To switch o the illumination of the decorative indicators
(15) and indicators of operating modes (16, 17, 18,
19, 20, 21), press the button (13) « » on the control
panel (5) or the button (27) « » on the remote
control (28), while the illumination of the decorative
indicators (15) and the operation mode indicators
(16, 17, 18, 19, 20, 21) will go out, to switch on the
illumination of the operation mode indicators and the
decorative indicators, press the button (13) « » on
the control panel (5) or the button (27) « » on the
remote control (28), the illumination of the decorative
indicators (15) and the operation mode indicators
(16, 17, 18, 19, 20, 21) will switch on.
• To turn o the fan, press the « » button (8) on the
Control Panel (5) or the « » button (22) on the
Remote Control (28) and remove the Power Cable
plug from the mains.
CLEANING AND MAINTENANCE
• Before cleaning the fan, switch it o and unplug it.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the fan (2).
• To avoid the risk of electric shock provide that no
water or other liquid gets into the fan body.
• You can use a vacuum cleaner with an appropriate
attachment to clean the Air-Inlet Grill (7) and the
Outgoing Airow Grill (3).
Indice
Lingue:
Altri manuali BRAYER Fan
BRAYER
BRAYER BR4953 Manuale utente
BRAYER
BRAYER BR4960 Manuale utente
BRAYER
BRAYER BR4975 Manuale utente
BRAYER
BRAYER BR4961BK Manuale utente
BRAYER
BRAYER BR4952 Manuale utente
BRAYER
BRAYER BR4954 Manuale utente
BRAYER
BRAYER BR4961WH Manuale utente
BRAYER
BRAYER BR4950 Manuale utente
BRAYER
BRAYER BR4951 Manuale utente
BRAYER
BRAYER BR4956 Manuale utente
