BRAYER BR4958BK Manuale utente
Instruction manual
Инструкция по эксплуатации
Fan BR4958BK
Вентилятор BR4958BK
brayer.ru
СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................12
RU ...................................................................................................................................21
KZ....................................................................................................................................30
3
EN
FAN BR4958BK
The fan is intended for articial ventilation of the
room.
DESCRIPTION
1. Base
2. Outgoing Airow Grill
3. Indication Panel
4. Control Panel
5. Remote Control Storage (21)
6. Carrying Handle
Control Panel (4)
7. Fan «ON/OFF» power button « »
8. Airow speed selection button «SPEED» « »
9. Airow type selection button «BLOW» « »
10. Timer on/o button «TIMER» « »
11. Oscillation mode on/o button «OSC» « »
Indication panel (3)
12. Airow speed indicators « - - »
13. «0.5H-1H-2H-4H» timer operation time indicators
14. Airow types indicators « - - »
EN
Remote control (21)
15. Fan «ON/OFF» power button
16. Airow speed selection «SPEED»
17. Timer on/o button «TIMER»
18. Airow type selection button «BLOW»
19. Mode power button «SILENT BLOW»
20. Oscillation mode on/o button «OSC»
21. Remote control
22. Battery Holder
4
EN
ON/OFF SPEED
TIMER BLOW
SILENT
BLOW
OSC
OSCTIMERBLOWSPEEDON/OFF
0,5 h
4 h
1 h
2 h
1
2
3
7
12 1413
8 9 10 11
15 16
17 18
19 20
21
22
4
5 6
Рiс. 1 Рiс. 2 Рiс. 3
5
EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation manual carefully before using
the fan; after reading, keep it for future reference.
• Use the unit for its intended purpose only, as it is
stated in this manual.
• Mishandling the unit can lead to its breakage and
cause harm to the user or damage to the user’s
property, which is not covered by warranty.
• Do not use the power cord as a carrying handle for
the fan.
• Do not wind the power cord around the fan body.
• Provide that the power cord does not contact with hot
surfaces and sharp furniture edges.
• Protect the unit from impacts, falling, vibrations and
other mechanical stress.
• Avoid blocking the air inlet grid of the fan with foreign
objects, do not cover the unit during the operation.
• Do not use the unit in places where inammable
liquids are used or aerosols are sprayed, do not use
the unit in the places where such liquids are stored.
• Do not use the unit near heating appliances, heat
sources or open ame.
• Do not use the unit outdoors, in bathrooms or in
places with high humidity.
• Do not use the unit in proximity to the kitchen sink,
near swimming pools or other containers lled with
water.
• If the unit is dropped into water, unplug it
immediately, and only then you can take the unit out
of water. Apply to the authorized service center for
testing or repairing the unit.
• Do not touch the unit body, the power cord and the
power plug with wet hands.
• It is not recommended to use the unit during lightning
storms.
• Do not block the fan grids and do not insert foreign
objects onto them.
ATTENTION! A lithium battery is used in the remote
control. To avoid danger, do not allow children to play
with the battery. If your child swallowed a battery,
immediately see your doctor.
• Make sure that the operating voltage of the unit
indicated on the label corresponds to your home
mains voltage.
• Place the fan vertically on a at dry moisture- and
heat-resistant surface, do not place it horizontally and
do not turn it over.
• Do not place the fan on soft surfaces, such as
carpets with high pile, sofas or beds.
• Do not place the fan near curtains and do not direct it
to house plants.
• Do not use the fan in a limited space, for example, in
built-in cabinets or wall niches.
• It is not recommended to stay in the zone of the air
ow from the fan for a long period of time, especially
for children and the elderly.
6
EN
• Never leave the unit connected to the mains
unattended.
• Unplug the unit after usage or before cleaning.
• Switch the fan o and unplug the power cord plug
from the mains socket.
• When unplugging the unit, hold the power plug and
carefully remove it from the mains socket, do not pull
the power cord, as this can lead to its damage or
cause a short circuit.
• Do not immerse the unit into water or any other
liquids.
• If water droplets fall on the fan body, switch it o and
disconnect the power plug from the mains before
touching the unit, then wipe the fan body with a dry
cloth.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION!
Do not allow children to play with polyethylene bags
or packaging lm. Danger of suocation!
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The device is not intended to be used by people
(including children) with physical, sensory,
psychological, or mental disabilities, or lacking
experience or knowledge, if they are not under the
supervision of or have not been instructed on the
usage of the device by the person responsible for
their safety.
• From time to time check the power cord integrity.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualied personnel to avoid danger.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent them
using the device as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
7
EN
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that specied specications of power
supply voltage of the unit correspond to the
specications of your mains. No additional settings
required when using the device in the mains with 60
Hz frequency.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
FAN ASSEMBLY
• Fan is supplied with its Base (1) disassembled. Do
not turn on the fan without the Base (1).
• Unscrew the lock ring on the lower part the body by
turning it counterclockwise.
• Thread the power cable through the opening
between the two halves of the Base (1) (g. 1).
• Align the two halves of the Base (1) and join them so
that the locks would trigger.
• Align the bumps on the lower part of the body with
the openings in the Base (1) (g. 2).
• Thread the power plug through the Lock Ring,
and screw the Lock Ring in by turning it clockwise,
making sure that the Base (1) is properly secured
(g. 3).
REMOTE CONTROL (22)
ATTENTION! A lithium battery is used in the remote
control. To avoid danger, do not allow children to play
with the battery. If your child has swallowed a battery,
immediately see a doctor.
Battery installation/replacing
• Press on the clamp and remove the battery holder
(22) from the remote
• control (21) body, insert a CR2025 battery (supplied
with the unit) into the holder, strictly following the
polarity.
• Install the battery holder (22) into the remote control
(21).
Notes:
- if there is an isolation insert in the battery holder
(21), remove the insert;
- replace the battery in time;
- do not recharge the lithium battery;
- remove the battery if you are not planning to use
the unit for a long time;
8
EN
- remove the used battery from the remote control
(21) and dispose of it.
• When you use the remote control, direct it to the front
part of the fan body.
• The distance between the remote control and the fan
should not exceed 5 m, the coverage angle should
be up to 30 degrees.
• Avoid exposing the receiver to direct sunlight,
otherwise false activation of control commands is
possible.
• If you do not use the Remote Control (21), place it on
the upper part of the Body (5).
FAN USAGE
• Use the Carrying Handle (6) to transport the fan.
• Place the fan Base (1) on a at, dry and steady
surface.
• Do not place the fan on soft surfaces, such as
carpets with high pile, sofas, or beds.
• Insert the power plug into the mains socket.
Switching the fan on/o and selecting the airow
speed
• To turn on the fan, press the « » «ON/OFF» Power
Button (7) on the Control Panel (4) or the «ON/OFF»
button (15) on the Remote Control (21) - the fan will
turn on.
• To turn o the fan, press the « » «ON/OFF» Power
Button (7) on the Control Panel (4) or the «ON/OFF»
button (15) on the Remote Control (21) a second
time - the fan will turn o.
• Press the « » «SPEED» (8) on the Control Panel
(4) or the «SPEED» buttons (16) on the Remote
Control (21), you can select the mode of airow to be
displayed on the Indication Panel (3) through the « -
-» indicators (12):
- « » low airow speed;
- « » medium airow speed;
- « » high airow speed.
Selecting the airow type
• Press the « » «BLOW» button (9) on the Control
Panel (4) or the «BLOW» button (18) on the Remote
Control (21), select the airow type.
• The airow type is displayed through the « - - »
indicators (14) on the Indication Panel (3):
- « » - standard fan operation;
- « » - natural wind imitation mode; the airow
speed changes sporadically from soft breeze to
strong gust of wind;
- « » - silent mode, the airow speed will increase
and decrease gradually.
Note: to turn on the silent mode using the Remote
Control (21) press the «SILENT BLOW» mode (19).
Fan operation time timer
• To set the fan operation time, press the « »
9
EN
«TIMER» button (10) on the Control Panel (4) or the
«TIMER» button (17) on the Remote Control (21);
the «0.5H» indicator (13) on the Indication Panel (3)
will turn on.
• Set the timer operation time with a second press
of the buttons (10 or 17). The timer can be set
anywhere from 0.5 to 7.5 hours, the set time will be
displayed on the Indication Panel (3) through the
«0.5H-1H-2H-4H» indicators (13):
• To set the timer a second time, keep pressing
the button (10 or 17) until the «0.5H-1H-2H-4H»
indicators (13) on the Indication Panel (3) turn o.
Switching the fan body oscillation on/o
• To turn the oscillation mode on, press the « »
«OSC» button (11) on the Control Panel (4) or the
«OSC» button (20) on the Remote Control button
(21) to turn o the oscillation mode, press the «
» «OSC» button (11) on the Control Panel (4) or the
«OSC» button (20) on the remote control (21).
• Once you are nished, turn o the fan by pressing
the «ON/OFF» Power Button « » (7) on the Control
Panel (4) or the «ON/OFF» button (15) on the
Remote Control (21), unplug the power cord from the
mains socket.
CLEANING AND MAINTENANCE
• Before cleaning the fan, switch it o and unplug it.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the fan.
• To avoid the risk of electric shock provide that no
water or other liquid gets into the fan body.
• You can use a vacuum cleaner with an appropriate
attachment to clean the Air-Inlet Grill and the
Outgoing Airow Grill (2).
STORAGE
• After cleaning put the fan away for storage in a dry
cool place away from children and disabled persons.
• Before using the fan next time, it is recommended to
check the unit operability and integrity of the power
cord isolation and the power cord plug.
DELIVERY SET
1. Fan — 1 pc.
2. Base – 1pc.
3. Remote control - 1
4. CR2025 battery - 1
5. Instruction manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Power supply: 220-240 V, ~ 50/60 Hz
• Rated input power: 50 W
• Remote control: 3 V — «CR2025» battery
(included)
10
EN
RECYCLING
To prevent possible damage to the
environment or harm to the health of people
by uncontrolled waste disposal, after service
life expiration of the unit or the batteries (if
included), do not discard them with usual
household waste, deliver the unit and the
batteries to specialized centers for further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal
service or to the shop where you purchased this
product.
The manufacturer reserves the right to change the
appearance, design and specications not aecting
general operation principles of the unit, without prior
notice.
The unit operating life is 3 years
The manufacturing date is specied in the serial
number.
In case of any malfunctions promptly apply to the
authorized service center.
Indice
Lingue:
Altri manuali BRAYER Fan
BRAYER
BRAYER BR4975 Manuale utente
BRAYER
BRAYER BR4956 Manuale utente
BRAYER
BRAYER BR4955 Manuale utente
BRAYER
BRAYER BR4974 Manuale utente
BRAYER
BRAYER BR4961WH Manuale utente
BRAYER
BRAYER BR4971 Manuale utente
BRAYER
BRAYER BR4952 Manuale utente
BRAYER
BRAYER BR4954 Manuale utente
BRAYER
BRAYER BR4951 Manuale utente
BRAYER
BRAYER BR4953 Manuale utente
