Bresser Saurus 2010300 Manuale utente
Beginner WLAN 3D Printer
with Filament Bundle
Art. Nr. 2010300
User manual
www.bresser.de
2
TABLE OF CONTENTS
TABLE OF CONTENTS....................................................................................2
Introduction.......................................................................................................4
General Information..........................................................................................5
Safety Instructions............................................................................................6
Chapter 1: 3D printing technology ..................................................................11
Chapter 2: About the 3D Printer......................................................................13
2.1 About the 3D Printer ..........................................................................13
2.2 Accessories .......................................................................................29
Chapter 3: Unpack..........................................................................................32
Chapter 4: Hardware structure .......................................................................36
4.1 Filament installation...........................................................................36
4.2 Starting the printer.............................................................................37
4.3 Inserting the filament .........................................................................37
Loading/Unloading filament.....................................................................40
Chapter 5: Levelling the printing platform.......................................................41
Chapter 6: Information about the software......................................................43
6.1 software installation...........................................................................43
6.2 First steps with REXprint ...................................................................44
Chapter 7: Basic printing functions.................................................................74
7.1 Creating a Gcode file.........................................................................74
7.2 printing methods................................................................................77
Chapter 9: Warranty and service ....................................................................90
www.bresser.de
3
www.bresser.de
4
Introduction
Note: Each unit is subjected to a factory test before shipment. Residues on the
extruder or the smallest of scratches on the construction tape are normal and
have no influence on the print quality.
Bresser GmbH would like to take this manual as an opportunity to thank the
technicians of Bresser GmbH as well as the users of this 3D printer for their
tireless efforts and the ( the braucht man nicht ) extremely important support.
This Bresser GmbH Saurus user manual is intended for the users of Saurus
who are now starting their journey into the future of printing with Bresser GmbH
Saurus. Even if you are familiar with the older models of Bresser GmbH
equipment or 3D printing technology, we recommend that you read this manual.
It contains a lot of important information for you to know about Saurus and to
improve your 3D experience:
(1) BRESSER SAURUS Quick Start Guide
The Quick Start Guide is included with the printer. The information it contains
will help you start printing in no time.
(2) BRESSER SAURUS product page on the Internet
Visit the product page on the Internet at www.bresser.de/P2010300 for
additional information, available updates or software for this printer and related
accessories.
www.bresser.de
5
General Information
Important note:
This manual contains all necessary information for setting up and operating the
device.
The operating instructions consist of the following parts: Introduction, general
and safety information, operation and product service.
For service requests, please have ready:
Art.-No.: 2010300
Product reference BRESSER SAURUS beginners WLAN 3D printer with
filament bundle
Manual:
Manual_2010300_WLAN-3D-Drucker-
SAURUS_en_BRESSER_v092020a.docx
•Please read this manual carefully before using the machine.
•This manual assumes that you are using the Windows 7 operating system to
operate the 3D Printer.
•The current version of the REXprint software is used.
www.bresser.de
6
Safety Instructions
IMPORTANT NOTE:
Familiarise yourself with this manual and read all the instructions it contains
before you start setting up and operating the machine. Failure to heed warnings
and instructions may result in personal injury, fire, and damage to the unit or
other property.
STRICTLY FOLLOW ALL SAFETY AND OTHER INSTRUCTIONS GIVEN IN
THIS MANUALAT ALL TIMES!
Safety in the working environment
①Keep the workplace clean!
②Do not operate the 3D Printer in the presence of flammable liquids, gases
or dust.
③Keep children and untrained persons away from the 3D printer.
Security of power supply
①Operate the 3D Printer only from an earthed power outlet. Do not make any
changes to the power plug of the 3D Printer.
②Do not operate the 3D printer in a hazy or humid environment.
Do not expose the 3D printer to direct sunlight.
③Do not use the power cord for any purpose other than its intended use.
www.bresser.de
7
④Do not operate the unit during thunderstorms.
⑤To avoid accidents, disconnect the device from the power supply if you are
not going to use it for a long periodof time.
• Safety of people
①Do not touch the nozzle or pressure plate during printing.
②Do not touch the nozzle after printing is completed.
③Wear suitable clothing.Do not wear loose clothing or loose-fitting jewellery.
Make sure that your hair, clothing and gloves do not come into the vicinity of
moving parts.
④Do not operate the device if you are tired or under the influence of drugs,
alcohol or medication.
• Precautions
① Do not leave the device unattended for a longtime.
②Do not make any changes to the device.
③Lower the pressure plate before inserting/removing filament. (The distance
between nozzle and pressure plate should be at least 50 mm)
④Operate the device in a well-ventilated environment.
⑤Do not use the device for unlawful purposes.
⑥ Do not use the appliance to make containers for storing food.
www.bresser.de
8
⑦Do not use the device to manufacture electrical equipment.
⑧Do not put models in your mouth.
⑨Do not remove the models by applying force.
•Environmental conditions
TEMPERATURE: Room temperature 15 to 30 °C
Moisture: 20% to 70%
• Filament specifications
Use filament only for the intended purpose! Use only the BRESSER filament or
filament of the brands authorised by BRESSER!
• Filament storage
A certain degree of decay can be observed in all polymers over time. Only
unpack the filament when you need it. The filament should be stored in a clean
and dry environment and protected from sunlight.
www.bresser.de
9
Legal notice
All information in this document can be extended or adapted without prior notice.
BRESSER GMBH MAKES NO WARRANTIES WITH RESPECT TO THIS
DOCUMENT, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR
PURPOSE.
Furthermore, BRESSER GmbH does not assume any liability for errors
contained in this manual or for incidental consequential damages in connection
with the delivery, performance or use of this material.
EC DECLARATION OF CONFORMITY
Bresser GmbH hereby declares that the 3D printer with article number: 2010300
complies with Directive 2014/30/EU. The full text of the EC declaration of
conformity is available at the following Internet address
www.bresser.de/download/2010300/CE/2010200_CE.pdf
www.bresser.de
10
This document contains information protected by copyright.
Copyright © 2020 BRESSER GmbH. All rights reserved.
The reproduction of this documentation - even in extracts - in any form (e.g.
photocopy, print, etc.) as well as the use and distribution by means of electronic
systems (e.g. image file, website, etc.) without the prior written permission of
the manufacturer is prohibited.
The designations and brand names of the respective companies used in this
documentation are generally protected by trade, trademark and/or patent law in
Germany, the European Union and/or other countries.
Indice
Altri manuali Bresser Stampante 3D
Bresser
Bresser T-REX2 Manuale utente
Bresser
Bresser RAPTOR Manuale utente
Bresser
Bresser Rex II Manuale utente
Bresser
Bresser Adventurer3 Manuale utente
Bresser
Bresser RAPTOR Manuale utente
Bresser
Bresser T-REX2 Manuale utente
Bresser
Bresser 2010100 Manuale utente
Bresser
Bresser XXL Jumbo Manuale utente
Bresser
Bresser T-REX Manuale utente
Bresser
Bresser T-REX Manuale utente
