Brickcom Mini Dome Series Manuale utente
1
Table of Contents
English ...................................................................................................................3
Deutsch................................................................................................................15
Español................................................................................................................27
Français ...............................................................................................................39
Italiano .................................................................................................................51
Português ............................................................................................................63
Русский ...............................................................................................................75
日本語 ..................................................................................................................87
2
Mini Dome Series Model Number
MD-100A
MD-100Ap-00
MD-100Ae-00
3
English
Megapixel Mini Dome
Network Camera
MD-100A Series
Easy Installation Guide
4
1. Check Package Contents
a. Network Camera (MD-100A) b. Product CD
c. Water-Proof Connector d. Allen Key
e. Warranty Card f. Screw bag
g. Easy Installation Guide h. Alignment Sticker
i. Dry Bag / Double-Sided Tape
5
2. Device Description
< Inner Panel >
< Outer view >
NOTE - (*) These are optional features. Please refer to the Product List
for the full list of optional features that are available for this product.
LED Indicators
Screw Hole
Reset Button
Micro SD/SDHC Card Slot (*)
Microphone Hole (*)
Security Screws
Lens Hood
Screw Hole
Lens
Screw Hole
6
3. Hardware Installation
WARNING - Do not mount the camera on a soft material. The camera
may fall and be damaged.
This document is for easy installation purpose only; please refer to
the user manual for more details.
1) Use the enclosed Allen key to detach the dome cover from the camera
device.
2) Remove the dry bag from its package. Use the double-sided tape to stick
the dry bag onto the designate position inside of the dome cover.
3) Choose the location on the wall or ceiling to place the camera. Attach the
location sticker to the desired spot. For ceiling installation, the best place to
mount the camera is into a ceiling stud.
4) Drill three holes through the center of the three location holes on the sticker.
7
5) Hammer the three plastic anchors provided in the product package into the
three location holes.
6) The user needs the three screws which are included in the product package
and a screwdriver. Mount the camera on the wall or ceiling and position
the three screw slots over the plastic anchors. Insert the three screws
provided in the product package into the holes and use a screwdriver to
tighten the screws clockwise until they are secure.
NOTE - For assembling the waterproof connector, please refer to the
instructions included in the connector package.
8
4. Camera Connection
1) Connect the camera to a PoE-enabled hub via a single Ethernet.
2) Connect the camera to a non-PoE hub using a PoE Injector.
9
5. Lens Adjustment
I. Adjust the lens to the desired position.
II. Focus
1) Loosen the lens lock screw.
2) Remove the lens hood.
3) Rotate the lens until the image in the Live View page is focused.
4) Retighten the lens screw lock.
5) Reattach the lens hood.
WARNING - Do not over rotate the lens.
6. Complete the Installation
Place the dome cover back on the camera device using the supplied Allen Key.
Lens Lock Screw
10
7. Setup the Network Camera
Insert the Installation CD into the CD-ROM driver. Run Auto-Run Tool directly
from the CD-ROM to start the installation. When installing the Brickcom software
kit for the first time, select a desired language for the interface. The available
languages are listed in the scroll box. Click <Install> and follow the steps to
install the EasyConfig wizard on the desired computer.
Please follow the instruction of the InstallShield Wizard to finish the Brickcom
Software Kit installation.
To launch EasyConfig or PC-NVR Standard, select the application and click
<Finish>. When launching the PC-NVR program, please refer to the PC-NVR
user manual.
Questo manuale è adatto per i seguenti modelli
3
Indice
Lingue:
Altri manuali Brickcom Telecamera di sicurezza
Brickcom
Brickcom FB-Series Scheda tecnica
Brickcom
Brickcom OB-130Np Istruzioni per l’uso
Brickcom
Brickcom Bullet Series Istruzioni per l’uso
Brickcom
Brickcom Hydra Series Manuale di installazione
Brickcom
Brickcom OSD-200 20xp Manuale utente
Brickcom
Brickcom WFB-100A Manuale utente
Brickcom
Brickcom OSD-040 36x Series Manuale utente
Brickcom
Brickcom OSD-200A 20xp Scheda tecnica
Brickcom
Brickcom CB-101A Series Manuale utente
Brickcom
Brickcom OB-E400AF Istruzioni per l’uso
Brickcom
Brickcom MD-500Ap Series Manuale utente
Brickcom
Brickcom VD-100A Manuale utente
Brickcom
Brickcom OB-100A V2 series Istruzioni per l’uso
Brickcom
Brickcom VD-E200Af series Istruzioni per l’uso
Brickcom
Brickcom Fixed Dome Series Scheda tecnica
Brickcom
Brickcom OSD-040 36x Series Manuale utente
Brickcom
Brickcom FB-130Np Series Manuale utente
Brickcom
Brickcom MD-100Ae Manuale utente
Brickcom
Brickcom MD-500Ap Series Scheda tecnica
Brickcom
Brickcom FB-100Ae Series Scheda tecnica
