Brickcom Bullet Series Istruzioni per l’uso

Hardware User’s Manual

Megapixel Day & Night

Economy Bullet Network Camera

English

Table of Contents

Before You Use This Product........................................................................................2

RegulatoryInformation .................................................................................................3

Chapter 1 - Package Contents ......................................................................................4

Chapter 2 - Bullet Series Network Camera.................................................................5

Chapter 3 - DeviceAppearance Description...............................................................6

Chapter 4 - Installation ..................................................................................................8

4.1 Hardware Installation...........................................................................................8

4.2. PoE Connection..................................................................................................9

4.3.Camera Connection .............................................................................................9

4.4 System Requirements.......................................................................................10

4.5 Software Installation..........................................................................................11

4.5.1 EasyConfig...............................................................................................19

Before You Use This Product

In many countries, there are laws prohibiting or restricting the use of

surveillance devices. This Network Camera is a high-performance, web-ready camera

which can be part of a flexible surveillance system. It is the user’s responsibility to

ensure that the operation of this camera is legal before installing this unit for its

intended use.

Upon opening the product’s package, verify that all the accessories listed on the

“Package Contents” are included. Before installing the Network Camera, read the

warnings in the “Easy Installation Guide”to avoid misuse. When installing the Network

Camera, carefully read and follow the instructions in the “Installation”chapters to avoid

damages due to faulty assembly or installation.

Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device

must accept any interference received, including interference that may cause

undesired operation.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

The availability of some specific channels and/or operational frequency bands are

country dependent and are firmware programmed at the factory to match the

intended destination. The firmware setting is not accessible by the end user.

Chapter 1 - Package Contents

Please check to make sure the product package contains all the accessories

listed below.

a. Network Camera

b. Screw bag

c. Warranty Card

d. Dry Bag

e. Power Adapter(Optional)

f. Product CD

g. PoE Injector (Optional)

h. Terminal Block

Chapter 2 - Bullet Series Network Camera

Overview

The Brickcom Bullet Series is a Bullet network camera. It adopts a megapixel sensor

which allows the camera to deliver extremely clear and detailed images that CCTV

cameras cannot offer. To optimize use of the megapixel resolution, the Bullet Series

uses efficient H.264/ MJPEG/ MPEG-4 codec compression to deliver dual configurable

video streams simultaneously at up to 30 fps. These features make the Bullet Series

the perfect outdoor camera for neighborhood, school campus, and parking lot

surveillance.

The Bullet Series has many user friendly features, such as support for DC12V power

supply, and Power over Ethernet which enables the camera to use the same cable for

power and data transmission, eliminating the need to install an external power supply.

With an IP66 certified outdoor enclosure, the Bullet Series is not only water proof, but

also dust proof.

Chapter 3 - Device Appearance Description

< Front Panel >

IR LED

Lens

Light Sensor

< Rear Panel >

(*) These are optional features. Please refer to the datasheet for the full list

of optional features that are available for this product.

< Hardware Reset >

1.RJ45 Connector

2.Digital Power DC+12V (Green)

3.Digital Output (Orange)*

4.Digital Input (Yellow)*

5.Digital Ground (White)*

6.RS485+ (Purple)*

7.RS485- (Gray)*

8.Line out (Green black)*

9.Line out Ground (Gray Black)*

10.Line in (Blue black)*

11.Line in Ground (Brown Black)*

12 DC12V+ (Red white)

13 DC12V- (Black white)

The Reset Button can be used to reboot the camera, restore it to factory default settings,

or switch on FocusEasy. If the camera experiences a problem, rebooting the camera

may correct the problem. If the problem remains, please restore the camera to factory

default settings and reinstall the software.

To Start/Cancel FocusEasy

To Start FocusEasy, please press and hold the reset button for 2-3 seconds. The

camera will play the melody indicating FocusEasy is already started. Then follow the

beeps to adjust the focus. To cancel FocusEasy, please press and hold the reset button

again for 2-3 seconds. The camera will play another melody indicating FocusEasy is

already shut down.

NOTE -FocusEasy is supported only on the Specific professional manual-focal

cameras, and is NOT supported on any moto-focal cameras.

To Reset

Press and hold the Reset Button for more than 10 seconds using a paper clip or thin

object. Wait for the camera to reset to default.

NOTE - By resetting the camera, all settings will be restored to the factory

default settings.

Micro-SD/SDHC/SDXC Card Capacity

The network camera is compatible with Micro-SD/SDHC/SDXC (Maximum 128GB)

cards.

FocusEasy / reset button

Micro SD Card slot

Chapter 4 - Installation

4.1 Hardware Installation

WARNING - Do not mount the camera on a soft material. The camera

may fall and be damaged.

Wall Installation

Drill three holes into the wall and (2) hammer the supplied plastic anchors

into the three holes.(3) Use a screwdriver and the supplied screws to

secure the plate to the wall.

Connect the POE cable.

4.2. PoE Connection

For the Power over Ethernet connection, construct the PoE cable using

the pin definitions of

the RJ45 connector below and refer to step 5 for

instructions on how to install the Water Proof

Connector. Once the PoE

cable has been constructed using the waterproof connector, pass

the RJ-

45 cable from the camera through the bracket and connect it to the PoE

cable.

RJ45Connector

Pin No.

Function

Pin 1

Transmit Out+ (Tx+)

Pin 2

Transmit Out- (Tx-)

Pin 3

Receive In+ (Rx+)

Pin 4

DC 48V

Pin 5

DC 48V

Pin 6

Receive In- (Rx-)

Pin 7

48V_GND

Pin 8

48V_GND

4.3.Camera Connection

The Bullet Series PoE compliant. The camera can be connected to a PoE-enabled

switch.

If using a PoE-enabled switch:

I. Use an Ethernet cable to connect the camera to the PoE switch.

If using a non-PoE switch:

Use a standard RJ-45 cable to connect the camera to a PoE Injector.

Indice

Altri manuali Brickcom Telecamera di sicurezza

Brickcom

Brickcom OB-302Ae V5 Series Istruzioni per l’uso

Brickcom

Brickcom VD-130A V2 Series Manuale utente

Brickcom

Brickcom FD-300Ap series Istruzioni per l’uso

Brickcom

Brickcom Fixed Dome Series Scheda tecnica

Brickcom

Brickcom Outdoor Bullet V2 Series Scheda tecnica

Brickcom

Brickcom FB-Series Scheda tecnica

Brickcom

Brickcom PZ-040 12x Series Manuale utente

Brickcom

Brickcom OB-E400AF Scheda tecnica

Brickcom

Brickcom VD-130Af Manuale utente

Brickcom

Brickcom Vandal Dome Series Scheda tecnica

Brickcom

Brickcom Hydra Series Manuale di installazione

Brickcom

Brickcom MD-300Np-A4-Star Scheda tecnica

Brickcom

Brickcom Mini Dome Series Manuale utente

Brickcom

Brickcom OB-502Ae V5 Series Istruzioni per l’uso

Brickcom

Brickcom FB-500A series Manuale utente

Brickcom

Brickcom FD-100A Series Manuale utente

Brickcom

Brickcom FB-H200Np-S-WDRPro Scheda tecnica

Brickcom

Brickcom OSD-200 20xp Manuale utente

Brickcom

Brickcom Vandal Dome Series Manuale utente

Brickcom

Brickcom OB-E400AF Istruzioni per l’uso

Brickcom

Brickcom FB-130Np Series Manuale utente

Brickcom

Brickcom FB-100Ae Series Scheda tecnica

Brickcom

Brickcom OB-130Np Istruzioni per l’uso

Brickcom

Brickcom PZ-040 12x Series Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente