Broadata LBC-H-T-LPB-Lite Istruzioni per l'installazione
LBC-H-T-LPB-Lite
LINK BRIDGETM HDBASET
HDMITRANSMITTER WITH
LOOPBACK VIDEO
BCI reserves the right to make changes to the products described herein without prior
notice or consent. No liability is assumed as a result of their use or application. All
rightsreserved.
©2015 Broadata Communications, Inc.
LBC-H-T-LPB-LiteUserManual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
SAFETY INSTRUCTIONS AND
COMPLIANCE DECLARATIONS
PLEASEOBSERVETHEFOLLOWINGSAFETY
PRECAUTIONS
SURGEPROTECTION DEVICERECOMMENDED
This product contains sensitive electrical components that may be
damaged by electrical spikes, surges, electric shock, lightning strikes,
etc. Use of surge protection systems is highly recommended in order
to protect and extend the life of your equipment.
LBC-H-T-LPB-LiteUserManual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
Broadata Technical Support, (800) 214-0222
4
TABLE OF CONTENTS
1.0 PRODUCT DESCRIPTION .............................................5
2.0 OPERATION CONTROLS AND FUNCTIONS ...............6
2.1 FRONT PANEL .................................................................6
2.2 REAR PANEL ...................................................................7
3.0 SERIAL CONTROL..........................................................8
3.1 D-SUB 9 PIN ASSIGNMENT ...........................................8
3.2 IR BLASTER CABLE PIN ASSIGNMENT.......................9
4.0 MAINTENANCE AND TROUBLESHOOTING ...............10
4.1 MAINTENANCE .............................................................10
4.2 TROUBLESHOOTING ..................................................10
5.0 SPECIFICATIONS..........................................................12
6.0 SERVICE PROCEDURE ...............................................13
6.1 REPLACEMENT POLICY .............................................13
6.2 RETURN AND REPAIR SERVICE .................................13
7.0 LIMITED WARRANTY ....................................................14
LBC-H-T-LPB-LiteUserManual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
1.0 PRODUCT DESCRIPTION
The LBC-H-T-LPB-Lite can convert a single CAT-5e/6/7 input and
2-way IR control to a single CAT-5e/6/7 output and includes a
simultaneousHDMIbypassoutput.Itsupports resolutionsupto1080p
FullHD,4K×2K timing,3D and multi-channeldigitalaudioformats (such
as LPCM 7.1CH, DolbyTrueHD, Dolby Digital Plus and DTS-HD).The
HDMI output can be connected to an HDMI display or cascaded to
another splitter. The CAT-5e/6/7 output can be connected to a
CAT-5e/6/7 toHDMIReceivertoextendthe operatingdistanceup to60
meters.
Features
• Extend HDBaseT signals up to 60m meters over one
CAT-5e/6 Cable and drop HDMI video
• Supportsfull HDTV video resolutions up to 4K2K@30Hz
• Fully uncompressed video and audio provides zero loss of
quality
• SupportstrueDDC/EDID/HDCPtransmission
• Video/audio+IR+data, over 1 CAT-5e/6 cable
• 1-way 24V/PoC remoting power at HDBaseT output port
• HDMI 1.4 and HDCP 2.2 compliant
• Supports IR control data
LBC-H-T-LPB-Lite User Manual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
Broadata Technical Support, (800) 214-0222
6
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
1. HDMI OUT: Connect to HDMI display forinstantimage display
or cascade with another family type transmitter. The unit will
detectCAT-5e/6/7output’sEDID whenitobtainsa 4Kx2KEDID
and sends out the signal accordingly to other output ports. If
CAT-5e/6/7 outputiswithouta 4Kx2K’sEDIDthe unitwilldetect
all output’s EDID and send out the signal that all outputs can
accept.
This device obtains the last memory function therefore, the
device will use the last CAT-5e/6/7 output port’s EDID when
CAT-5e/6/7 output port is not connected after power cycling.
2. HDMI IN: Connect with source equipment such as DVD/Blu
ray or PS3 player.
3. RS-232 IN: Connect to aPC/LaptoporRS-232enableddevice
(with supplied 3.5mm Phone Jack to D-Sub 9-Pin female
adaptor) to transmit of RS-232 commands.
HDMI OUT HDMI IN
LAN
RS232 IN
HDMI to CAT5e/6 with LAN/IR/RS232 Transmitter
123
LBC-H-T-LPB-LiteUserManual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
2.2 Rear Panel
1. POWER LED: Once the power supply is connected the LED
willilluminate.
2. DC 24V: Plug the 24V DC power supply into the unit and
connect the adaptor to an AC outlet.
3. IR 1 BLASTER: Connect with the supplied IR Blaster to blast
outthe IR signal received from the Receiver side. Place the IR
Blasterindirectline-of-sightofthe equipment to be controlled.
4. IR 2 EXTENDER: Connect with the supplied IR Extender to
receiveIRsignal fromTransmitterside andblastout atReceiver
side. Ensure that remote controller being used is within the
direct line-of-sight of the IR Extender.
5. USB: This slot is reserved for firmware update only.
6 . LINK LED: ThisLEDwillilluminatewhenboththeinputsource
and output display signals are connected through CAT cable.
When it blinks regularly it states the display is NOT sending
signalstoReceiverbut theTransmitterandReceiverarelinked
and if it blink irregularly it states an error has occurred.
7. CAT-5e/6/7 OUT: Connect this port to CAT5e/6/7 to HDMI
ReceiverwithCAT-5e/6/7 cable to extend thesignalupto60m.
POWER
DC 24V CAT5e/6 OUT
IR 1
BLASTER USB LINK
IR 2
EXTENDER
1
234567
LBC-H-T-LPB-Lite User Manual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
Broadata Technical Support, (800) 214-0222
8
3.0 SERIAL CONTROL
3.1 D-Sub Pin Assignment
Pin
1
2
3
4
5
6
7
8
9
Define TX/RX
N/C
TxD/RxD
RxD/TxD
N/C
GND
N/C
N/C
N/C
N/C
LBC-H-T-LPB-LiteUserManual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
3.2 IR Blaster Cable Pin Assignment
IR Blaster Power 5V
IR Blaster Signal
NC
LBC-H-T-LPB-Lite User Manual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
Broadata Technical Support, (800) 214-0222
10
4.0 MAINTENANCE AND TROUBLESHOOTING
4.1 Maintenance
Thereisnooperatormaintenanceother then keeping the units
clean. However, observe the following light indicators to make
sure that the unit is working properly:
4.2 Troubleshooting
If the LBC-H-T-LPB-Lite units do not operate properly after
installation,checkfor possiblecablebreaks, looseconnections,
and incorrect cable connections. If problems persist that may
be fiber related, contact BCI at 1-800-214-0222 for further
assistance.
LBC-H-T-LPB-LiteUserManual
Link BridgeTM HDBaseT HDMI Transmitter w/Loopback Video
5.0 SPECIFICATIONS
Video/Audio
HDMI Version 1.4 with 3D, 4K×2K support
VideoResolution Up to 4K2K @ 30Hz
Protocol DDC/EDID Capable, HDCP 2:2
VideoBandwidth 300MHz / 10.2Gbps
AudioFormats Supports up to 7.1CH & Dolby
TrueHD, DTS-HD MasterAudio
AudioSamplingRate 32KHzto192KHz
HDMI/AudioConnector HDMIFemaleplug
Data
SerialControl RS232
Data Rate Up to 57.6Kbaud
Connector 3.5mm Jack
IRData Rate 30 - 50KHz
In/OutConnectors 3.5mm Stereo
HDBT Transmission
Cable Type CAT 5e/6 or higher
Number of Cables 1
ConnectorDistance RJ-45/Up to 60m
Physical
DimensionsStandalone 4.02”(W) x 4.33”(D) x 0.98”(H)
PowerConsumption +24 VDC @ 1.25 Amps (Max.)
Operating Temperature 0 to +40oC
Humidity 20 to 90% RH, Non-Condensing
Indice
Altri manuali Broadata Trasmettitore
Broadata
Broadata LBO-H/DP-EAD-T Manuale utente
Broadata
Broadata LB-H2-E Manuale utente
Broadata
Broadata LBC-H-T/R-4P-LITE Manuale utente
Broadata
Broadata LBO-SV-AD-T Manuale utente
Broadata
Broadata LBC-HDBT Manuale utente
Broadata
Broadata LBO-DVI-EAD Manuale utente
Broadata
Broadata 4800 Series Manuale utente
Broadata
Broadata LBC-HDBT2-T/R-48 Manuale utente
Broadata
Broadata LBC-H/V-T-WP Manuale utente
