BRONKHORST MASS-STREAM D-6400 Manuale utente

MASS-STREAM™D-6400

Mass Flow Meter/Controller

Quick Start Guide English

Doc. no.: 9.17.160 rev. C

Date: 16-02-2023

Complete documentation

For a comprehensive instruction manual, hook-up diagrams and other

documentation about the MASS-STREAM™ D-6400, visit the Bronkhorst® product

pages:



www.bronkhorst.com/downloads (or scan the QR code)

Intended use

The MASS-STREAM™ D-6400 has been developed to measure and/or control mass flow rates of

clean, dry, non-corrosive and non-toxic gases in a fluid system.

The product is suited for general purpose indoor (dry) applications, like laboratories and machine

enclosures, as wellas for sheltered outdoor applications, like installations inthe plant constructions,

under the following constraints:

Ambient temperature

0 … 50 °C

Operating pressure

0 … 10 bar (g)for aluminum instrument bodies,

0 … 20 bar (g) for stainless steelinstrument bodies (SS316)

Power supply

+15 … 24 Vdc ± 10 %

Responsibility for the use of the equipment regarding its intended use, suitability for the intended

application, cleaning and compatibility of process media with the applied materials lies solely with

the user.

Safety notes

The product(s) described in this document may only be handled by qualified personnel

who are familiar with combined fluid and electrical systems and who recognize the

associated hazards (e.g. (high) fluid pressure, electric shock).

The user is responsible for taking the necessary safety measures to prevent damage

and/or injury while working with the equipment and processmedia (as described in the

associated Material Safety Data Sheets).

The equipment and its accessories must be used in accordance with their intended use,

specifications and operating instructions.

Opening the equipment is not allowed and will void warranty and cancel the

manufacturer's liability.

If the product isdefective or otherwise does not meet your requirements, please contact

your Bronkhorst representative for assistance or advice.

Product overview

1. Fluid inlet

2. Display/buttons (optional)

3. Fieldbus connector(s) (optional)

4. Status LED and multifunctional switch

5. Power & signalconnector (8DIN)

6. Serial number label

7. Fluid outlet

Installation

Verify that the power supply has sufficient capacity to install the instrument into the

network.

Alwaysturn off electrical power before connecting equipment electrically.

TX-RS232/BUS

Analog output

0 Vdc power

Custom (default

disabled, 0 Vdc)

RX-RS232/BUS

+ Us

0 Vdc sense

Mounting

If applicable: install the process connections

according to the manufacturer's instructions.

Use mounting holes to attach instrument to

stable underground.

Electrical connection

8DIN male connector - pinning

Configuration

Display menu

If the instrument is equipped with a display:

„

Set functions and parameters using the

display menu and navigation buttons.

FlowSuite

After installing the FlowSuite software

application, establish connection.

„

Set functions and parameters using the

installed software application.

The complete list of menu entries, and instructions how to changing the default password

(recommended) is available for download (doc. Multi-Functional Display 9.17.164): see page 2.

Navigation

The buttons have the following functions:

Back Button [1]

Return/ back

Cycle through pre-settings in the lower data

field

Up/Down button [2 +3]

Navigating the menu items

Selecting fields and characters

Enter button [4]

Enter selected menu item

Confirm selection/changes

Password protection

A password upon delivery protects the device

from unauthorized operation. .

Factory default password is:

‘abc’ followed by 5 x Enter (blanks).

„

Press the Enter button to activate the screen.

When prompted with the password dialog.

Select the correct character using the Up/Down

buttons.

„

Press the Enter button to confirm, and move

to the next position.

„

After entering thelast character of the

password: press the Enter button to confirm.

Install FlowSuite 2.0

To install the FlowSuite software application:

„

Scan the QR code or browse to:



https://www.microsoft.com/store/productId/9PCDF686TK2W

Powering up

Check leak tightnessof fluid system before applying full operating pressure.

For reliable operation, make sure fluid stream is uncontaminated.

1. Power up

2. Pressurize fluid system

3. Green indication LED: ready to use!

Customer Care

For current information about Bronkhorst® and worldwide service addresses, please visit our

website.

For after-sales questions, helpandguidance, our Customer Care department can be contactedby e-

mail:



aftersales@bronkhorst.com

No matter the time zone, our experts within the Customer Care department are available to answer

your request immediately or take appropriatefurther action. Our experts can be reached at:



+31 859 02 18 66

Service and returns

For current information about Bronkhorst®, worldwide service addresses and return

information, visit the Service & Support section on our website:



www.bronkhorst.com/service-support (or scan the QR code)

Disposal

If you are a customer within the European Union and wish to dispose of Bronkhorst®

equipment bearing the symbol of a crossed out waste disposal bin, Bronkhorst can take

care of proper dismantling, recycling and/or reuse. Just return the item(s) following the

return instructions on our website; please mention in thecovering letter that you are

returning the product for disposal.

In countries outside the EU, disposal of electrical and electronic equipment (EEE) may be subject to

local or national directives and/or legislation. If applicable, consult local or national authorities to

learn how to handle EEE properly in your area.

Disclaimer

This document has been reviewed and is believed to beaccurate. Bronkhorst Instruments GmbH

does not assume liability for errors, inaccuracies or absence of information. The material in this

document merely serves information and illustration purposes; no rights can be derivedfrom its

contents.

Bronkhorst Instruments GmbH reserves theright to modify or improve its products and

documentation without prior notice. Device specifications and the contents of the package may

deviate from what is statedin this document.

Bronkhorst Instruments GmbH

Am Ziegelwerk 1

D-85391 Leonhardsbuch, Germany

+49 8166 9921 0

info.bhi@bronkhorst.com

www.bronkhorst.com

Altri manuali per MASS-STREAM D-6400

Indice

Altri manuali BRONKHORST Strumento di misura

BRONKHORST

BRONKHORST EL-FLOW Select Series Manuale utente

BRONKHORST

BRONKHORST ES-FLOW 1 C Series Manuale utente

BRONKHORST

BRONKHORST EL-FLOW Prestige Manuale utente

BRONKHORST

BRONKHORST ES-FLOW ES Series Manuale utente

BRONKHORST

BRONKHORST FLEXI-FLOW Compact Manuale utente

BRONKHORST

BRONKHORST mini CORI-FLOW ML120 Manuale utente

BRONKHORST

BRONKHORST EL-PRESS Series Manuale utente

BRONKHORST

BRONKHORST MASS-STREAM D-6400 Manuale utente

BRONKHORST

BRONKHORST u-FLOW Series Manuale utente

BRONKHORST

BRONKHORST mini CORI-FLOW M1 Series Manuale utente

BRONKHORST

BRONKHORST D-6300/FS Manuale utente

BRONKHORST

BRONKHORST mini CORI-FLOW ML120 Manuale utente

BRONKHORST

BRONKHORST EL-FLOW Select Series Manuale utente

BRONKHORST

BRONKHORST F-112AX Manuale utente

BRONKHORST

BRONKHORST mini CORI-FLOW ML120 Manuale utente

BRONKHORST

BRONKHORST BRIGHT Manuale utente

BRONKHORST

BRONKHORST MASS-STREAM D-6400 Manuale utente

BRONKHORST

BRONKHORST Mini CORI-FLOW MI Series Manuale utente

BRONKHORST

BRONKHORST FLEXI-FLOW Compact Manuale utente

BRONKHORST

BRONKHORST mini CORI-FLOW ML120 Manuale utente

BRONKHORST

BRONKHORST MASS-VIEW series Manuale utente

BRONKHORST

BRONKHORST EL-FLOW Prestige series Manuale utente

BRONKHORST

BRONKHORST LIQUI-FLOW L30 Manuale utente

BRONKHORST

BRONKHORST mini CORI-FLOW M12 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente