Canyon SB-42 Manuale utente
QUICK GUIDE v2
Smart band
with real-time body and
ambient temperature
monitoring SB-42
EN EN
SMART BAND WITH REAL-TIME BODY AND
AMBIENT TEMPERATURE MONITORING.
• 24h temperature monitoring
• Multi-sport mode
• 0,96 inch color LCD screen
• IP67 waterproof
• Camera remote
• Compatibility with iOS 12+ and Android 5.1+
Complete set
• Smart band
• User manual
DEVICE OVERVIEW
USAGE
Make sure that your smart band is fully charged
before using.
Charging: remove the smart
band strap from the side of
the touch button, as shown
in the gure. Then plug the
USB connector into the USB
port of your computer, a wall
socket adapter or a power
bank. Charging progress will
be indicated on the screen.
For more efcient charging,
it is advisable to use a
power bank or wall charger produced by Canyon.
Charger requirements: 5 V/1А.
Charging time: 2-2.5 hours depending on the
source of the charge.
Turning on: press and hold the touch button for 3
seconds.
1
3
5
2
4
1. Touch button (press and hold to enter into the
interface. Press again briey to choose the interface
or to change the function, press and hold to use the
interface or function. Press and hold to go back)
2. Thermometer sensor
3. LCD screen
4. HR sensor
5. Battery charging point
EN EN
Scan this QR code to download and
Connecting to a smartphone: charge the
smart band, turn it on, activate Bluetooth on your
smartphone, download and install the Canyon
smartwatch application Canyon Life by scanning the
QR code below. Open Canyon Life app->” Bluetooth
Devices”->” Start”-> choose your watch from the de-
vices list (SB42) -> press ”ADD DEVICE”. Use the
app to apply your preferred settings: for example,
to turn on periodic heart rate measurement, to enter
your personal body parameters, to select apps that
you want to receive notications from, etc.
Date and time
Date and time will be synchronized after connecting
to the APP.
The main screen of the device shows the following
data:
Number of steps
Heart rate level
Sleep duration
Time and date
Battery charge
level
Smart band is
paired to the
smartphone
High temperature
12 hour
time format
FUNCTIONS
1. Health*
Tap the button once to go to the Health menu. Press
and hold to enter the submenu.
Body temperature. Watch is showing your
current body temperature. Sb-42 has a 24h
temperature monitor – it measures tem-
perature continuously. For more accurate
results, the watch should t snugly to the
skin. For the body temperature there is a
sensor which can record temperature in a
EN EN
Blood oxygen measurement. Stay on
SpO2 interface to measure blood oxygen,
it will take around 1 minute. When nished
watch will vibrate.
* For the correct calculation of these parameters, be sure to
specify the correct parameters in the app settings after connecting
the device (height, weight, age, etc.).
Attention!
The measurement results are for informational pur-
poses only and should not be the basis for medical
diagnoses.
Incorrect posture, talking, hand position, skin mois-
ture, tightness of the bracelet on the wrist, etc., affect
the accuracy of the measurement.
2. Activities data
Long press touch button to go to the activi-
ties results screen: number of steps taken*,
estimated distance, calories burned for the
current day. Long press the “back” key to
go back to the previous menu.
3. Sport
There are 4 sport modes:
Running
Rope
Bicycle
Yoga
range from 36.2 to 42 degrees Celsius. If the sensor
records a temperature higher than 37, it vibrates and
shows a red symbol on the WF as an alert. The data
is recorded and sent to APP after synchronization.
Attention!
Sb-42 has a CT1711 high accuracy thermometer
sensor, which is located on the back of the case.
However, a smart band is not a medical device. The
sensor has a non-linear measurement accuracy,
which depends on the value of the measured
temperature. In addition, the gap is affected by the
ambient temperature and the tightness of the watch
sensor to the skin. At a normal body temperature of
36.6 degrees, the measurement error is higher than
at an elevated body temperature. When measuring
temperatures above 37 degrees, the gap is minimal.
Also, the external environment may inuence at the
nal result: the bracelet when outdoors may show a
lower temperature; covered with a blanket or clothing
it may show a higher temperature than the real
temperature.
Heart Rate. Open the heart rate interface
and wait to start the heart rate measure-
ment. The result will be displayed on the
screen and sent to the smartphone. This
function can also be launched from the app
by selecting the appropriate menu item.
EN EN
Choose the sport mode, press and hold the touch
button to start training. Press and hold the button
for 3 seconds to pause the workout. Press and hold
“back” key again to resume training. When
paused, long press the “stop” button will stop this
function and return you to the previous menu.
4. Sleep monitoring
Sleep results for the previous night will be
automatically displayed every day.
The device stores the last 8 messages
received from the smartphone.
The watch must be connected to the phone
via the Canyon Life app. In the application
settings, you must specify from which
programs and services notications should
be shown.
6. Messages
After connecting to the APP, you can view
the latest 8 messages.
7. Tools
Press and hold button to enter to the tools.
Stopwatch. Press and hold to enter the
stopwatch interface. Press briey to start/
stop timer.
Find phone. Press and hold to open.
Press briey to start - your phone will ring if
Bluetooth connection is active. (Should be
already connected to the app). Press and
hold to exit.
Ambient temperature. Same as body tem-
perature measurement, this function works
continuously. But while the band is worn
on the wrist this function is not applicable
because of the inuence of the wrist tem-
perature on the sensor. Take off the watch
from the wrist and put on a stable surface
in the environment you want to measure
the temperature. Wait for 10-15 minutes
while the sensor will be balanced with the
surrounding temperature. The result will be
displayed on the screen.
8. Settings
Press and hold to enter the settings menu
interface.
Background. There are 2 backgrounds to
choose from. Press and hold the button to
open, tap to change, press and hold to exit.
EN EN
Power Off. After opening the Power Off
menu press briey to switch to Yes, press
and hold for three seconds to turn off your
device.
Device information. This interface displays
BT device name and the Mac address info.
Your smart
band is
detected by the
smartphone,
but fails to
connect
Turn the smart band off and
then turn it back on. Turn
Bluetooth on and off on your
phone. Reboot your phone.
The smart band
is connected,
but many of the
functions are
not working.
(Android only) Make sure that
the smart band is connected
to the smartphone via the
Canyon Life app only, and not
paired via Android Bluetooth
setting.
The
smartphone
constantly dis-
connects from
the app.
You must give permission for
the app to run in the back-
ground on your phone. Read
the detailed instructions on the
ofcial Canyon website.
Smart band
shows incorrect
body tempera-
ture
1st way – remove the watch,
hold the thermometer sensor
close to any warm surface (a
cup of tea, for example). In few
seconds band should react
and show high temperature.
Wear it back to the hand and
try again.
2nd way – restart the band,
wear it tightly, wait for 5 min-
utes, check the result
TROUBLESHOOTING
Problem Solution
Your smart
band doesn’t
turn on
Connect your watch via a USB
connector to a USB port or a
socket adapter and wait for a
few seconds.
Your smart
band isn’t de-
tected by the
smartphone
Make sure that Bluetooth and
GPS high accuracy are active
on your smartphone. Make
sure the watch is not con-
nected to another smartphone.
EN
SAFETY INSTRUCTIONS
Read and follow all instructions before
usage of this device.
1. Protect the device from excessive amount of water:
this smart band is protected only from small amounts
of water such as rain drops or small spillages. It’s
forbidden to put it under powerful jets of water, to fully
immerse it, or to wear it while swimming.
2. Protect the device from heat: do not place heating
devices near it, and do not expose to direct sunlight
during hot season for a long time, do not use in the
sauna.
3. Protect the device from breaking: avoid dropping
the device from over 0,5m to hard surfaces.
Warning! Do not use in hot water. This can lead to
damage to the device!
If the actions from above-mentioned list do not help,
please contact support service at Canyon web-site:
Your smart
band isn`t con-
nected to the
smartphone
Please make sure that your
smart band isn`t connected
to another smartphone. If you
have changed the phone,
please unpair the smart band
from the old phone.
WARRANTY LIABILITIES
Warranty period starts from the date of the device’s
purchase from the Seller, authorized by Canyon.
The date of purchase is indicated in your sales receipt
or a waybill. During warranty period, a repair,
replacement or refund of payment for goods are
performed on discretion.
Asbisc Enterprises PLC, 43, Diamond
Court, Kolonakiou Str, 4103, Limassol, Cyprus, Ayios
Athanasios,
EN
BA
OKOLINE U STVARNOM VREMENU.
• 24-satno praćenje temperature
• Višenamjenski način rada
• 0,96″ LCD ekran u boji
• IP67 standard vodootpornosti
• Daljinski upravljač kamere
• Kompatibilnost sa iOS 12+ i Android 5.1+
• Pametna narukvica
• Korisnički priručnik
1
3
5
2
4
BA
UPOTREBA
Prije upotrebe provjerite je li vaša pametni
narukvica potpuno napunjena.
Punjenje: uklonite kaiš
pametne narukvice sa
strane dodirne tipke, kao što
je prikazano na slici. Zatim
priključite USB priključak u
USB priključak računara,
adapter za zidnu utičnicu ili
eksternu bateriju. Napredak
punjenja bit će prikazan na
ekranu. Za učinkovitije pun-
jenje preporučljivo je koristiti
bateriju ili zidni punjač proizvođača Canyon.
Zahtjevi za punjač: 5 V/1А.
Vrijeme punjenja: 2-2,5 sata, ovisno o izvoru
punjenja.
Uključivanje: pritisnite i držite dodirnu tipku 3
sekunde.
1. Dodirnite tipku (pritisnite i držite za ulaz u sučelje.
Ponovno pritisnite kratko za odabir sučelja ili za prom-
jenu funkcije, pritisnite i držite za korištenje sučelja ili
funkcije. Pritisnite i držite za povratak)
2. Senzor termometra
3. LCD ekran
4. HR senzor
5. Mjesto za punjenje baterije
BA
Povezivanje sa pametnim telefonom: napunite
pametnu narukvicu, uključite je, aktivirajte Bluetooth
na pametnom telefonu, preuzmite i instalirajte
Canyon aplikaciju za pametne satove, Canyon Life,
skeniranjem donjeg QR koda. Otvorite aplikaciju
Canyon Life-> “Bluetooth uređaji” -> “Start” -> od-
aberite svoj sat s popisa uređaja (SB42) -> pritisnite
“DODAJ UREĐAJ”. Upotrijebite aplikaciju za akti-
vaciju željenih postavki: na primjer, za uključivanje
periodičnog mjerenja otkucaja srca, za unos osobnih
tjelesnih parametara, za odabir aplikacija od kojih
želite primati obavijesti itd.
Datum i vrijeme sinkronizirat će se nakon poveziv-
anja s aplikacijom.
Glavni ekran
Glavni ekran uređaja prikazuje sljedeće podatke:
BA
Broj koraka
Razina otkucaja
srca
Trajanje spavanja
Vrijeme
i datum
Nivo baterije
Pametna
narukvica je
povezana sa
pametnim
telefonom
Visoka temperatura
12-satni for-
mat vremena
*
Dodirnite gumb jednom da biste otvorili izbornik
Health. Pritisnite i držite za ulazak u podizbornik.
Tjelesna temperatura. Sat prikazuje vašu
trenutnu tjelesnu temperaturu. SB-42 ima
24-satni nadzor temperature - kontinuirano
mjeri temperaturu. Za točnije rezultate, sat
bi se trebao dobro pristajati na vašoj ruci.
Za tjelesnu temperaturu postoji senzor koji
može bilježiti temperaturu u rasponu od
BA
36,2 do 42 Celzijeva stepena. Ako senzor zabilježi
temperaturu višu od 37, vibrira i prikazuje crveni
simbol na glavnom ekranu kao upozorenje. Podaci
se snimaju i šalju u aplikaciju nakon sinkronizacije.
Pažnja!
Sb-42 ima CT1711 senzor termometra visoke
preciznosti, koji se nalazi na stražnjoj strani kućišta.
Međutim, pametna narukvica nije medicinski uređaj.
Senzor ima nelinearnu tačnost mjerenja, što ovisi
o vrijednosti izmjerene temperature. Osim toga, na
preciznost utiču temperatura okoline i prijanjanje
senzora sata za kožu. Pri normalnoj tjelesnoj
temperaturi od 36,6 stepeni, pogreška mjerenja je
veća nego kod povišene tjelesne temperature. Pri
mjerenju temperatura iznad 37 stepeni, nepravilnost
je minimalna. Također, vanjsko okruženje može
uticati na konačni rezultat: narukvica kada je na
otvorenom može pokazivati nižu temperaturu;
prekrivena dekom ili odjećom može pokazivati višu
temperaturu od stvarne.
Otkucaji srca. Otvorite sučelje za otkucaje
srca i pričekajte da započne mjerenje
otkucaja srca. Rezultat će se prikazati na
ekranu i poslati na pametni telefon. Ova se
funkcija također može pokrenuti iz aplikacije
odabirom odgovarajuće stavke izbornika.
BA
Mjerenje kisika u krvi. Ostanite na SpO2
sučelju za mjerenje kisika u krvi, trebat će
vam oko 1 minute. Po završetku sat će
vibrirati.
* Za tačan izračun ovih parametara svakako navedite tačne
parametre u postavkama aplikacije nakon povezivanja uređaj
(visina, težina, starost itd.).
Pažnja!
Rezultati mjerenja su samo u informativne svrhe i ne
bi trebali biti osnova za medicinske dijagnoze.
Nepravilno držanje tijela, razgovor, položaj ruku,
vlažnost kože, stezanje narukvice na zglobu itd. utiču
na točnost mjerenja.
2. Podaci o aktivnostima
Dugo pritisnite dodirnutipku za otvaranje
ekrana s rezultatima aktivnosti: broj
koraka*, procijenjena udaljenost, potrošene
kalorije za tekući dan. Dugo pritisnite tipku
“natrag” za povratak na prethodni izbornik.
3. Sport
Postoje 4 sportska načina rada:
Trčanje Uže
Bicikl Joga
Odaberite sportski način rada, pritisnite i
držite dodirnu tipku za početak treninga.
Pritisnite i držite tipku 3 sekunde da biste
Indice
Lingue:
Altri manuali Canyon Pedometro
