Car and Driver Eye1Pro CDC-632 Manuale utente
MODEL #: CDC-632
WE’RE HERE TO HELP
Call Us:
(833) 227-3274
Live Chat With Us:
www.CarAndDriverTech.com
Email Us:
Support@CarAndDriverTech.com
Eye1Pro
2K ULTRA HD DASHCAM
Read Me
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
10) Only use attachments/accessories specified by the manufacturer.
11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
FCC NOTICE TO USERS:
FCC ID: 2AMSOCDC-632
Caution: Changes or modifications not expressly approved by the Party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection Against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications, however there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for Help.
The device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
1
2
PRODUCT OVERVIEW
EN
1) Menu/Mode Button
2) Up Button
3) SOS/WIFI Button
4) Down Button
5) OK Button
6) Power Button
7) SD Card Slot
8) HDMI Port
9) USB Port
10) Microphone
11) Reset Button
12) Speaker
13) Camera
14) Mount
15) AV Out Port
16) LCD Screen
17) Mini USB
18) Mini USB to Cigarette Port
19) Suction Cup
_
_
_
_
_
__
______
______
___
____
__
__
__
__
__
__
__
__
__
12 3 45
6
78
9
10
11
12
13
14
15
16
17
18
19
FUNCTIONS
Power
1) Turn On: Press to turn the
dash cam on.
2) Turn Off: Press and hold to
turn the dash cam off.
Reset If the device crashes, use a
small pin to press this button
and reset the dash cam.
OK
Menu/Mode
1) In Video Mode, press to
enter the Video Menu.
2) In Photo Mode, press to
enter the Photo Menu.
3) In Playback Mode, press to
enter the Playback Menu.
4) In any Menu, press to enter
the Settings Menu.
5) In any mode, press and hold
to switch modes (Video Mode/
Photo Mode/Playback Mode).
Up
1) In any Menu, press to move
up in the options.
2) In Video Mode, press to
switch the mute on or off.
3) In Photo Mode, press to
zoom in.
3
1) In Video Mode, press to
start or stop recording.
2) In Photo Mode, press to
take a photo.
3) In Menus, press to confirm
settings.
4) In Playback Mode, press to
start or stop playback.
Down
1) In any Menu, press to
move down in the options.
2) In Photo Mode, press to
zoom out.
SD Card Slot Insert the SD Card into this slot,
with the golden teeth facing the
camera side.
HDMI Connect to a TV to view videos
and photos.
USB Port
1) Connect to a PC using the
included USB cable to view
or transfer videos and photos.
2) Connect to a charger to
charge the dash cam.
SOS/WIFI
1) During recording, press to
immediately save the video
and prevent it from being
overwrit-ten during usage.
2) Press and hold to turn On/
Off WiFi.
CHARGING AND POWERING ON
You can charge the dash cam by connecting it to
your car’s cigarette lighter using the included
power cable.
Powered On: While charging and powered on the
LED indicator will flash red and yellow. When not
charging the LED indicator will flash red.
Powered Off: While charging and powered off
the LED indicator will remain yellow.
4
The dash cam will power up automatically when
the car is started and will power off automatically
when power to the dash cam is cut. You can also
manually turn On/Off the dash cam by pressing
and holding the Power Button.
Note: When disconnected from a power source
the dash cam will automatically begin powering
off. The internal battery will ensure the dash cam
remains on long enough to save any ongoing
recording.
RECORDING MODE
After powering on, the dash cam will automatically
enter recording mode. This is indicated by a red
recording icon appearing in the top left corner of
the screen. Press the OK Button to start/stop
recording. Press the SOS/Wifi button to lock an
ongoing recording and prevent it from being loop
recorded over.
Recording Sub-menu: To enter the recording
sub-menu press the Menu/Mode Button while not
recording. A blue video icon will appear in the top
left corner of the screen. You can adjust the video
resolution, set the length of the loop recording,
adjust the exposure, adjust the G-Sensor
sensitivity, set the time stamp and GPS stamp,
track the speed, and more.
In this menu, you may choose to turn Motion
Detection on or off. This feature turns the camera
5
on when it senses movement and turns it off
when movement has stopped. In this menu, you
may choose to turn Parking Mode on or off. This
feature turns the dash cam on and records and
locks a one minute video when sudden
movement is detected (For example being hit
while parked).
CAMERA MODE
When not recording, press and hold the Menu/
Mode Button to switch to Camera Mode. A
camera icon will appear in the top left corner of
the screen. Press the OK Button to take a
picture.
Camera Sub-menu: To enter the camera sub -
menu, press the Menu/Mode Button. A blue
camera icon will appear in the top right corner of
the screen. Here, you can change the capture
mode, resolution, sequence, quality, and more.
PLAYBACK MODE
When in Camera Mode, press and hold the
Menu/Mode Button to switch to Playback Mode.
The playback icon will appear in the top left
corner of the screen. Use the Up and Down
Buttons to scroll through the available files, and
press the OK Button to play the selected video.
Note: All videos and pictures are stored here in
chronological order.
When a file has been selected, press the Menu/
6
7
Mode Button to choose to either delete the file or
protect the file from being overwritten via loop
recording. You can also select “Slideshow,”
which will cycle through the available files. Use
the Up and Down Buttons to select an option,
and press the OK Button to confirm it.
SYSTEM SETTINGS
When in any Menu, press the Menu/Mode
Button again to enter the System Settings. In
this menu, you can adjust the WiFi, date and
time, displayed language, auto power-off time,
sound, and more.
In this menu, you can also Format your memory
card. This will erase all files on the memory
card, even locked files. Before performing this
action, be sure to back up any important videos
and photos. In addition, you can restore the
dashcam to its Default Settings.
Note: You should be sure to turn on the dash
cam's wifi if you intend to pair it with your phone
via the app.
Downloading And Installing The App
IOS users can download the app
from the Apple app store by
searching for “Road Cover Eye1Pro” app and
then downloading it.
8
by searching for “Road Cover Eye1Pro” app and
then downloading it.
In the app, you can control most of the
functions and settings of your dash cam from
your phone, and control recording, photo-
taking, and file management.
Pairing Your Phone To The Dash Cam
•Turn On Wifi: Make sure the wifi on the
dash cam has been turned on. This can
be done in the settings menu or by
pressing and holding the SOS/Wifi button.
•You will see an SSID number starting with
CDC632 displayed on the dash cam's
screen. Open your phones wifi settings
and select the wifi source that matches
this SSID number.
•You may be prompted for a password. If
so, enter "12345678".
•After the password is entered open the
app.
Android users can download the
app from the Google play store
Note: After pairing the dash cam to your phone
using the app, some of the buttons on the dash
cam will not remain operational. As such, most
controls must be maid on your phone via the
app.
9
RECORDING MODE USING THE APP
After connecting the dash cam with your phone
you will be able to control most features of the
device via the Eye1 pro app.
Start/Stop Recording On The App: Press the red
circle button on the app.
Start/Stop Recording On The Dashcam: Press
the OK Button directly on the dashcam.
Note: Press the SOS/Wifi button directly on the
dash cam to lock an ongoing recording and
prevent it from being loop recorded over.
Recording Sub-menu On The App: To enter the
recording sub-menu press the icon while not
recording. A red menu will open up on the screen.
This menu allows you to adjust both your recording
settings and your system settings. Note: For more
details on individual settings that can be adjusted
in the recording sub menu and the system setting
menu please refer to the System Settings and
Recording Mode sections.
CAMERA MODE ON THE APP
Taking A Picture On The App: Press the red
circle button on the app. In camera mode the red
button will have a camera icon in it. Where as in
recording mode the red button will not.
Note: While your phone and the dash cam are
paired, pictures can not be initiated via the dash
cam and must be taken via the app.
Altri manuali per Eye1Pro CDC-632
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Car and Driver Telecamera da cruscotto
Car and Driver
Car and Driver ZX-1222 Manuale utente
Car and Driver
Car and Driver CDC-646 Manuale utente
Car and Driver
Car and Driver MINIOPRO CDC-628 Manuale utente
Car and Driver
Car and Driver Copilot CP-1001 Manuale utente
Car and Driver
Car and Driver CDC-634 Manuale utente
Car and Driver
Car and Driver CDC-629 Manuale utente
Car and Driver
Car and Driver MINIOPRO CDC-628 Manuale utente
Car and Driver
Car and Driver CAD-BUC100 Manuale utente
Car and Driver
Car and Driver CDC-900 Manuale utente
Car and Driver
Car and Driver Eye1Pro CDC-632 Manuale utente
