Carrier EU-OSK105 Manuale utente

CONTENTS

DECLARATION OF CONFORMITY

SPECIFICATION...............................................

PRECAUTIONS ...............................................

DOWNLOAD AND INSTALL APP....................

INSTALL THE SMART KIT...............................

USER REGISTRATION ...................................

NETWORK CONFIGURATION.........................

HOW TO USE APP............................................

SPECIAL FUNCTIONS......................................

Hereby, we declare that this Smart kit is in

compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU.

A copy of the full DoC is attached.

(European Union products only)

SPECIFICATION

Model: EU-OSK105,US-OSK105

Standard: IEEE 802. 11b/g/n

Antenna Type: Printed PCB Antenna

Frequency Band: 2400-2483.5MHz

Operation Temperature:0 C~45 C/32 F~113 F

Operation Humidity: 10%~85%

Power Input: DC 5V/300mA

Maximum TX Power: <20dBm

Please keep you APP up to date with the latest version.

Due to special situation may be occurred, we explicitly

claims below: Not all of theAndroid and iOS system

are compatible with APP. We will not be responsible

for any issue as a result of the incompatibility.

Cautions

ireless safety strategy

Smart kit only support WPA-PSK/WPA2-PSK

encryption and none encryption .

WPA-PSK/WPA2-PSK encryption is recommended.

Due to different network situation, control process

may return time-out sometimes. If this situation

occurs, the display between board and App may not

be the same, please do not feel confused.

Smart Phone camera needs to be 5 million pixels or

above to make sure scan QR code well.

2PRECAUTIONS

Applicable system: iOS, Android.

WARNING

INSTALL THE SMART KIT(wireless module)

Remove the protective cap of the smart kit

(wireless module)

Open the front panel and insert the smart kit

(wireless module) into the reserved interface.

Insert

Attach the QR code packed with Smart kit

(wireless module) to the side panel of the

machine, ensure it is convenience to be scanned

by the mobile phone.Alternatively, user can take

picture of the QR Code and save it into their own

phones.

:This interface is only compatible with

SMARTKIT(wireless module) provided by the

manufacturer.

VI5

5USER REGISTRATION

Please ensure your mobile device is connected to

Wireless router. Also, the Wireless router has already

connected to Internet before doing user registration and

network configuration.

It is better to log in your email box and active your

registration account by clicking link in case you forget

the password. You can log in with the third party accounts.

1Click "Create Account

Android iOS

2Enter your email address

and password, and then

click " "Register

6NETWORK CONFIGURATION

Cautions

Kindly reminder:

It is necessary to forget any other around network and

make sure theAndroid or iOS device just connect to

the Wireless network you want to configure.

Make sure theAndroid or iOS device Wireless function

works well and can be connected back to your original

Wireless network automatically.

User must finish all the steps in 8 minutes after powering on

air conditioner, otherwise you need to power on it again.

Note:

Using Android or iOS device to do network

configuration

There are two ways to finish the network configuration:

Network configuration by Bluetooth scan

Network configuration by select appliance type

Make sure your mobile device has already been

connected to the Wi-Fi network which you want to use.

Also, you need to forget other irrelevant Wi-Fi network

in case it influences your configuration process.

Disconnect the power supply of AC.

Connect the power supply of AC, and continuously press

the “LED DISPLAY” or “DO NOT DISTURB” button seven

times in 10 seconds.

When the AC displays “AP”, it means that the AC Wi-Fi

has already entered into “AP” mode.

Network configuration by Bluetooth scan

Note: Make sure the bluetooth of your mobile device is

working.

Press “ + Add Device ” Press “Scan for nearby

devices”

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Carrier Telecomando

Carrier

Carrier WTC-IR-LB Manuale utente

Carrier

Carrier RG10B2/BGEF Manuale utente

Carrier

Carrier OSK102 Manuale utente

Carrier

Carrier RG56/BGEF-CA Manuale utente

Carrier

Carrier RBC-AMS54E-UL Manuale utente

Carrier

Carrier RG67V/BGEF Manuale utente

Carrier

Carrier RG10L1/BGEF Manuale utente

Carrier

Carrier 33CSIRRCVR-01 Manuale utente

Carrier

Carrier AQUASNAP Manuale utente

Carrier

Carrier split room air conditioner remote control Manuale utente

Carrier

Carrier Infrared Remote 2 Manuale utente

Carrier

Carrier RG10L/BGEF Manuale utente

Carrier

Carrier RBC-AMS54E-UL Guida alla risoluzione dei problemi

Carrier

Carrier NTC-IR2 Manuale utente

Carrier

Carrier 33TB-AC01 Manuale utente

Carrier

Carrier 33CSPGMR-01 Manuale utente

Carrier

Carrier RG66B3/BGEF Manuale utente

Carrier

Carrier HDB Manuale utente

Carrier

Carrier RG56V Series Manuale utente

Carrier

Carrier 40KMC Manuale utente

Carrier

Carrier WTC-RT Manuale utente

Carrier

Carrier Aquasnap Plus 33AW-RC1 Manuale utente

Carrier

Carrier RG56 Manuale utente

Carrier

Carrier RG10A2/BGEF Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione