CDA HVN91 Manuale di riferimento

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu

HVN91 Induction Hob

Manual for Installation, Use and Maintenance

Important

The CDA Group Ltd cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note that

CDA reserve the right to invalidate the guarantee supplied with this

product following incorrect installation or misuse of the appliance or

use in a commercial environment.

This appliance is not designed to be used by people (including

children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had

supervision or instructions on how to use the appliance by someone

who is responsible for their safety.

Under no circumstances should any external covers be removed for

servicing or maintenance except by suitably qualiﬁed personnel.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity

This appliance has been manufactured to the strictest standards and

complies with all applicable legislation, including Electrical safety (LVD)

2006/95/EC and Electromagnetic interference compatibility (EMC)

2004/108/EC. Parts intended to come into contact with food conform

to 89/109/EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special

local authority waste collection centre or to a dealer providing

appliance recycling services.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health. It also

enables the constituent materials to be recovered, saving both energy

and resources. As a reminder of the need to dispose of household

appliances separately, the product is marked with a crossed-out

wheeled dustbin.

Please note:

•Induction hobs become hot and remain hot during and immediately

after use. Do not touch the hob until it has been allowed to cool.

•Keep children away from the appliance when in use.

•Never use the hob top for storage.

•Pan handles should never stand out beyond the edge of the

worktop. This will ensure children cannot reach them.

•Do not lean over the hob when it is in use.

•Follow the cleaning instructions carefully.

•Ensure the base of the saucepan is clean and dry before placing it

on the hob.

•Avoid hard shocks from cookware – the vitroceramic glass surface

is highly resistant but not unbreakable.

•Do not place hot lids ﬂat on the hob top. A “suction” eect could

cause damage to the hob.

•Do not drag cookware across the hob top: in the long term, this

could cause damage to the hob.

•Do not store cleaning or ﬂammable products in the unit below the

hob.

•Always use appropriate cookware.

•Do not cook unopened tins of food directly on the hob.

•Never put cooking foil or plastic materials on the ceramic surface

when the hob is hot. These materials could melt and cause

damage to the hob.

•This hob (Class 3) has been designed for use only as a cooking

appliance. Any other use should be considered incorrect and

therefore dangerous.

FOR THOSE WITH HEART PACEMAKERS OR ACTIVE IMPLANTS:

The function of this hob conforms to current electromagnetic

interference standards and thus is in total compliance with legal

requirements (2004/108/CE directives).

To avoid interference between your hob and a pacemaker, your

pacemaker must be designed and programmed in compliance with

the regulations that apply to it. As such, CDA guarantee only that our

product is compliant.

With regard to the compliance of the pacemaker or any potential

incompatibility, you should obtain information from the manufacturer

or your attending physician.

Important

•Do not use the hob if the glass surface is cracked or damaged to

prevent the risk of electric shock. Disconnect it from the power

supply.

•Ensure that the power cable of a connected electrical appliance

near the hob is not in contact with the cooking zones.

Important: Please refer to page 13 for information on conguring

the power consumption mode correctly. The hob must be

congured at rst switch on.

Cooking on Induction

The principle of induction cooking is based on magnetic eect.

When you put your cookware on an induction zone and switch it on,

the electronic boards in the hob produce induced currents in the base

of the cookware and instantly raise its temperature. This heat is then

transferred to the food inside the cookware.

The best cookware to use with induction cooking has thick ﬂat bases,

as the heat will be better distributed so cooking more evenly.

Most cookware is compatible with induction cooking. There are three

ways to check the suitability of your cookware:

1. Using a magnet to see if the base of the pan is magnetic: if three

magnet sticks, then the cookware is compatible.

2.Place the pan on one of the cooking zones switched on to power

level 4: if the display remains on, then the cookware is

compatible. If the display ﬂashes, the cookware cannot be used on

an induction hob.

3.Check the instructions or packaging of the pans for the symbols

indicating suitability for use with induction.

Power level Type of cooking

0 Switched o

1/2 For melting (butter/chocolate) or keeping food warm

3/4 Keeping food hot or to heat small quantities of liquid

5/6 Heat larger quantities of liquid (sauces etc.)

7/8 Slow boiling, e.g spaghetti, soups, stews, potatoes

9/10 Gentle frying

11 Browning meats, frying ﬁsh, omelettes

P Fast frying steaks

Fig.1

Zones:

1. Front left 2.8 kW 180 mm

2. Rear left 2.8 kW 180 mm

3. Rear centre 3.1 kW 210 mm

4. Front right 2.2 kW 160 mm

5. Right 3.6 kW 280 mm

6 7 8 9 10 11 12 13 14

Using your Hob

Control panel:

9. Power key

10. Power level keys

11. Direct power key

12. Zone indicator

13. Boost

14. Direct power key 2

15. Tempo function

16. Timer keys

17. Childlock

The table below oers guidance as to what each power level is for.

Using your Hob

To switch the zone on

•Touch the key for the zone required. The zone display will ﬂash 0

and the hob will beep to conﬁrm the hob is on.

Please note: If a power level is not set within ﬁve seconds, the zone

will switch o automatically.

To set the power level

•Touch the keys to increase the power level from 1 (lowest) to P

(maximum), and the key to reduce it.

•To go straight to P, touch the key when the zone is switched on.

To turn the power o

•Touch the key for the zone used or reduce the power level on the

zone by touching the key until the zone display switches o.

Direct power key

•The hob is equipped with a direct power key to allow access to a

speciﬁc power level for ease of use, with a factory preset of

power level 8.

•After turning the power on for the zone required, touch the direct

power key. To change to any other power level, touch either or

keys until the required power level is shown on the zone display.

•It is possible to adjust the power level on the direct power key if

necessary. To do so, when the hob is switched o, touch the

direct power key for approximately ﬁve seconds until the hob beeps

and the display shows the current power level. Touch the or

keys until the zone display shows the required power level and then

touch the direct power key to set the powernlevel. The hob will

beep to conﬁrm the power level has been set.

Boost

•The hob is equipped with a boost function, allowing a higher

power level than power level 12 for an unspeciﬁed length of time.

This allows maximum temperature to be reached quickly. To turn

on the boost function once the zone is switched on, touch the

key. bo will show on the zone display. When the pan has reached

the temperature required, then select the required power level by

touching or .

Please note:

•The boost function does not switch o automatically. You must set a

power level when boost is no longer required.

Total

•The hob is equipped with a total function, allowing you to set a new

power level for a total period of time before the zone returns to the

ﬁrst power level.

1. Switch the zone on and set the required power level.

2. Touch the key.

3. Set the new power level using the power keys and total time

required at that level using the timer keys.

4. Conﬁrm the selection by touching the key

•The zone display will show the total programme power level

and a. (dot) and the timer will start to countdown. Once the total

programme is complete, the zone will return to the original power

level.

Auto

•The hob is equipped with an automatic programme function, allowing

you to specify both the power level and time a zone will switch on and

o.

1. Switch the zone on

2. Touch the key – the display will show the current time, with the

hours in the zone display and the minutes in the timer display. If

the time is not correct, set the hour using the power keys and the

minutes using the timer keys.

3. Touch the key to conﬁrm the time – the displays will ﬂash.

4. Set the time when the zone is to switch o, using the power keys

for the hours and using the timer keys for the minutes and conﬁrm

it by touching the key.

5. Set the length of time the zone is to be on up to a maximum of 99

minutes using the timer keys and conﬁrm it by touching the key.

6. Set the power level using the power keys up to a maximum of

power level 10 and conﬁrm it by touching the key. The displays

will show Auto and then switch o. A red LED will show to signify

the Automatic programme has been set.

Please note:

•Automatic programming can only be set on one zone for each section.

Indice

Altri manuali CDA Piano cottura

CDA

CDA HVG620 Manuale di riferimento

CDA

CDA HVC93 Manuale di riferimento

CDA

CDA HN9626FR Guida rapida

CDA

CDA HVN93 Manuale di riferimento

CDA

CDA HCG601 for Manuale di riferimento

CDA

CDA HG6001SS Guida rapida

CDA

CDA hc6620 Manuale di riferimento

CDA

CDA HC3616FR Guida rapida

CDA

CDA hn9610 Manuale di riferimento

CDA

CDA HC6621FR Scheda tecnica

CDA

CDA HCN610 Manuale di riferimento

CDA

CDA HN6850FR Manuale utente

CDA

CDA HC9606FR Scheda tecnica

CDA

CDA hc3620 Manuale di riferimento

CDA

CDA HVN 32 Series Istruzioni per l’uso

CDA

CDA HCE550 Manuale di riferimento

CDA

CDA HVC70 Manuale di riferimento

CDA

CDA hc7620 Manuale di riferimento

CDA

CDA HVG670 Guida rapida

CDA

CDA HN3615FR Guida rapida

CDA

CDA HVC 32 for Manuale di riferimento

CDA

CDA HN6731FR Istruzioni per l'installazione e il funzionamento

CDA

CDA CERAMIC HOBS HVC65 Istruzioni per l’uso

CDA

CDA HVN61 Manuale di riferimento

Manuali Piano cottura popolari di altre marche

Siemens

Siemens EX875KYV1E Scheda tecnica

AEG

AEG CERAMIC HOB 6010 K Manuale utente

VALERA

VALERA CT 70A Manuale utente

Zanussi

Zanussi ZGF 6420 Manuale utente

Gaggenau

Gaggenau CI 273 Manuale utente

G3 Ferrari

G3 Ferrari Energy Manuale utente

Pkm

Pkm IN4B Manuale utente

Award

Award H903BG Manuale utente

Zanussi

Zanussi VCH 5005 RZ Manuale utente

Miele

Miele KM 523 Manuale utente

Hotpoint

Hotpoint IS67V8CCXT/E Manuale utente

AEG

AEG HK854870XB Manuale utente

Cookology

Cookology SEP600BK Manuale utente

Bauknecht

Bauknecht Hob Manuale utente

Zanussi

Zanussi ZGM 782 Manuale utente

dipo INDUCTION

dipo INDUCTION DIBK218S Manuale utente

Miele

Miele KM 5987 Manuale utente

Miele

Miele KM 360 G Manuale utente