CEL-MAR ADA-14110 Manuale utente

User manual

ADA-14110

RS232 to Wi-Fi (802.11b) Wireless Serial Server ith MODBUS

GATEWAY

io_ada-14110_v1.13_en

ADA-14110

Contents

1. GENERAL INFORMATION...................................................................................................................................................................... 4

1.1. WARRANTED INFORMATION....................................................................................................................................................... 4

1.2. GENERAL CONDITIONS FOR SAFE USE....................................................................................................................................4

1.3. CE LABEL....................................................................................................................................................................................... 4

1.4. ENVIRONMENTAL PRESERVATION.............................................................................................................................................4

1.5. SERVICE AND MAINTENANCE..................................................................................................................................................... 4

1.6. PACK CONTENTS.......................................................................................................................................................................... 4

2. PRODUCT INFORMATION..................................................................................................................................................................... 4

2.1. PROPERTIES................................................................................................................................................................................. 4

2.2. DESCRIPTION................................................................................................................................................................................ 5

2.3. WIRELESS NETWORK COMMUNICATIONS (WLAN)..................................................................................................................6

2.3.1. COMMUNICATIONS IN THE TCP/UDP SOCKETS MODE...................................................................................................6

2.3.2. COMMUNICATIONS IN THE VIRTUAL SERIAL PORT MODE (RealPort)............................................................................6

2.3.3. COMMUNICATIONS IN THE SERIAL BRIDGE MODE..........................................................................................................6

2.3.4. COMMUNICATIONS IN THE INDUSTRIAL AUTOMATION MODE (Modbus Gateway)........................................................6

2.3.5. OTHER COMMUNICATION TYPES.......................................................................................................................................6

2.4. ISOLATION..................................................................................................................................................................................... 6

3. INSTALLATION........................................................................................................................................................................................ 6

3.1. ASSEMBLING................................................................................................................................................................................. 7

3.2. CONNECTION TO WI-FI WIRELESS NETWORK (WLAN)...........................................................................................................7

3.2.1. CONNECTION OF THE WIRELESS SERIAL SERVER TO COMPUTER BY THE USE OF WIRELESS NETWORK

ADAPTER......................................................................................................................................................................................... 7

3.2.2. CONNECTION TO COMPUTER VIA NETWORK DEVICES ACCESS-POINT TYPE, ROUTER WI-FI................................7

3.2.3. CONNECTION TO COMPUTER VIA INTERNET BY THE USE ROUTER WI-FI / DSL........................................................8

3.2.4. CONNECTION FOR FUNCTIONING IN MODE TCP/UDP SERIAL BRIDGE.......................................................................9

3.2.5. CONNECTION OF THE WIRELESS SERIAL SERVER TO FUNCTIONING IN MODBUS GATEWAY MODE...................10

3.3. CONNECTING OF RS232 INTERFACE DEVICES......................................................................................................................11

3.3.1. CONNECTING OF DEVICE WITH RS232 POR, DTE TYPE (PC COMPUTER).................................................................11

3.3.2. CONNECTING OF DEVICE WITH RS232 POR,T DCE TYPE (MODEM, CODE READER)...............................................11

3.4. CONNECTING POWER SUPPLY.................................................................................................................................................11

4. STARTUP............................................................................................................................................................................................... 12

5. CONFIGURATION................................................................................................................................................................................. 12

5.1. INITIAL CONFIGURATION USING ADAFINDER SOFTWARE....................................................................................................12

5.1.1. ADAFINDER INSTALLATION...............................................................................................................................................12

5.1.2. NETWORK SETTING.......................................................................................................................................................... 12

5.2. CONFIGURATION AND MANAGEMENT BY THE USE OF INTERNET BROWSER...................................................................14

5.2.1. NETWORK CONFIGURATION............................................................................................................................................ 14

5.2.1.1. IP ADDRESS CONFIGURATION................................................................................................................................14

5.2.1.2. WLAN CONFIGURATION........................................................................................................................................... 15

5.2.1.3. WLAN SECURITY SETTINGS....................................................................................................................................15

5.2.1.4. CONFIGURATION SETTINGS FOR WLAN NETWORK ACCESS AUTHORIZATION...............................................16

5.2.1.5. NETWORK SERVICES SETTINGS............................................................................................................................16

5.2.1.6. IP FORWARDING SETTINGS.....................................................................................................................................16

5.2.1.7. SOCKET TUNNEL SETTINGS....................................................................................................................................16

5.2.1.8. ADVANCED NETWORK SETTINGS...........................................................................................................................16

5.2.2. SERIAL PORT CONFIGURATION.......................................................................................................................................16

5.2.2.1. PORT PROFILES (OPERATING MODES)..................................................................................................................16

5.2.2.1.1. REALPORT (VIRTUAL PORT ) CONFIGURATION............................................................................................17

5.2.2.1.2. TCP SOCKETS CONFIGURATION....................................................................................................................17

5.2.2.1.2.1. TCP SERVER AND CLIENT CONFIGURATION........................................................................................18

5.2.2.1.2.2. THE 'ENABLE TCP KEEP-ALIVE' OPTION CONFIGURATION................................................................19

5.2.2.1.2.3. SERIAL PORT TRANSMISSION PARAMETERS CONFIGURATION........................................................19

5.2.2.1.3. UDP SOCKETS CONFIGURATION....................................................................................................................19

5.2.2.1.3.1. UDP CLIENT & SERVER CONFIGURATION IN CASE OF MASTER DEVICE.........................................19

5.2.2.1.3.2. UDP CLIENT & SERVER CONFIGURATION IN CASE OF SLAVE DEVICE............................................20

5.2.2.1.3.3. SERIAL PORT TRANSMISSION PARAMETERS......................................................................................21

5.2.2.1.4. SERIAL BRIDGE PROFILE CONFIGURATION.................................................................................................21

5.2.2.1.4.1. SERIAL PORT TRANSMISSION PARAMETERS......................................................................................22

5.2.2.1.5. INDUSTRIAL AUTOMATION (MODBUS GATEWAY) CONFIGURATION..........................................................22

5.2.2.1.5.1. CONFIGURATION FOR COMMUNICATION WITH DEVICES MODBUS-MASTER TYPE.......................22

5.2.2.1.5.2. CONFIGURATION FOR COMMUNICATION WITH MODBUS-SLAVE TYPE DEVICE.............................24

5.2.2.1.5.3. SERIAL PORT TRANSMISSION PARAMETERS......................................................................................26

5.2.3. SYSTEM SETTINGS............................................................................................................................................................ 26

5.2.4. USERS CONFIGURATION.................................................................................................................................................. 26

5.2.4.1. CHANGING USER MANE AND PASSWORD.............................................................................................................26

5.2.4.2. ADDING NEW USER WITH LIMITED PERMISSIONS FOR CONFIGURATION OR MANAGEMENT.......................26

5.2.5. MANAGMENT...................................................................................................................................................................... 27

5.2.5.1. SERIAL PORTS MANAGEMENT................................................................................................................................27

ADA-14110

5.2.5.2. CONNECTIONS MANAGMENT.................................................................................................................................. 27

5.2.6. ADMINISTRATION............................................................................................................................................................... 27

5.2.6.1. FILE MANAGEMENT................................................................................................................................................... 27

5.2.6.2. BACKUP & RESTORE CONFIGURATION..................................................................................................................27

5.2.6.3. FIRMWARE UPDATE..................................................................................................................................................27

5.2.6.4. FACTORY DEFAULT SETTINGS................................................................................................................................27

5.2.6.5. SYSTEM INFORMATION............................................................................................................................................27

5.2.6.6. REBOOT...................................................................................................................................................................... 27

5.2.6.7. LOGOUT – ENDING MANAGEMENT AND CONFIGURATION..................................................................................27

6. USING VIRTUAL PORT SERVICE [REALPORT]..................................................................................................................................27

6.1. VIRTUAL PORT DRIVER INSTALLATION IN WINDOWS XP......................................................................................................27

6.2. REALPORT CONFIGURATION IN WINDOWS XP......................................................................................................................28

7. FACTORY DEFAULT............................................................................................................................................................................. 30

8. TROUBLESHOOTING........................................................................................................................................................................... 30

9. VERSIONS............................................................................................................................................................................................ 31

10. SPECIFICATION.................................................................................................................................................................................. 31

ADA-14110

1. GENERAL INFORMATION

Thank you for your purchase of CEL-MAR Company product. This product has been completely tested and is covered by a two year

warranty on parts and operation from date of sale.

If any questions or problems arise during installation or use of this product, please do not hesitate to contact Technical Support at +48

41 362-12-46 or e-mail support@cel-mar.pl.

1.1. WARRANTED INFORMATION

The ADA-14110 Serial Server is covered by a two year warranty from date of sale. In case of being damaged it will be repair or the

damaged component will be replace. The warranty does not cover damage caused from improper use, materials consumption or any

unauthorized changes. If the product does not function (is damaged), or not operate in accordance with the instructions, will be

repaired or replaced.

All warranty and no warranty repairs must be returned with paid transport and insuring to the CEL-MAR Company.

CEL-MAR Company under no circumstances won't be responsible for ensuing damage from improper using the product or as a result

of random causes: the lightning discharge, the flood, the fire and the like.

CEL-MAR Company is not be held responsible for damages and loss including: loss of profits, loss of data, pecuniary losses ensuing

from using or the impossibility of using this product.

In specific cases CEL-MAR Company discontinue all warranties and in particular do not follow the user manual and do not accept

terms of warranty by the user.

1.2. GENERAL CONDITIONS FOR SAFE USE

The device should be installed in a safe and stable places (eg, electroinstallation cabinet), the powering cable should be arranged so

as not to be exposed to trampling, attaching, or pulling out of the circuit.

Do not put device on the wet surface.

Do not connect devices for nondescript powering sources,

Do not damage or crush powering wires.

Do not make connection with wet hands.

Do not adapt, open or make holes in casings of the device!

Do not immerse device in water or no other liquid.

Do not put the fire opened on device sources: candles, an oil lamps and the like.

Complete disable from the supply network is only after disconnecting the power supply circuit voltage.

Do not carry out the assembly or dis-assembly of the device if it is enabled. This may result to short circuit and damage the device.

The device can not be used for applications that determine human life and health (eg. Medical).

1.3. CE LABEL

The CE symbol on the device CEL-MAR means compatibility with electromagnetic compatibility Electromagnetic

Compatibility Directive EMC 2014/30/WE. Declaration of Conformity is available by contact with Technical Service (email:

support@cel-mar.pl; phone: +48 41 362-12-46).

1.4. ENVIRONMENTAL PRESERVATION

This sign on the device inform about putting expended device with other waste materials. Device should send to the

recycling. (In accordance with the act about the Electronic Appliance Expended from day 29 of July 2005)

1.5. SERVICE AND MAINTENANCE

ADA-14110 does not require the servicing and maintenance.

Technical support is available at number +48 41 362-12-46 in 8.00-16.00, from Monday to Friday.

1.6. PACK CONTENTS

The device is delivered with: User Manual, antenna and ADANet software CD.

2. PRODUCT INFORMATION

Attention!

Class A device designed for installation in environments commercial and light industrial. In residential environment may cause harmful

interference radio-electric, in which case the user will have to to take appropriate steps to eliminate them.

2.1. PROPERTIES

●Operating with the data rates up to 11Mbps on the 2,4GHz frequency in the wireless network (IEEE 802.11b standard),

●Baud rate in wireless network 1, 2, 5.5, 11 Mbps,

●Modulation CCK(11/5 Mbps), DQPSK(2 Mbps), DBPSK(1Mbps),

●Sensitivity of receiver: -82dBm for 11Mbps, -87dBm for 5.5Mbps, -89dBm for 2Mbps, -92dBm for 1Mbps,

●Channels number: 11 (USA/Canada), 13 (Europe), 14 (Japan),

●Antenna connection via SMA connector,

●Wireless network security: WEP (64/128-bit encryption), WPA (128-bit encryption), WPA2 (128-bit encryption), PEAP, PSK (pre-

shared key mode),

●Protocols: TCP, UDP, DHCP, SNMP, SSL/TLS, Telnet, Rlogin, LPD, HTTP/HTTPS, SMTP, ICMP, IGMP, ARP,

●WWW sever implemented for configuration of the server ports,

●Configuration of net service

●Configuration of net services according to user personal setting,

●Static or dynamic IP address (added by DHCP server),

●Diagnostics of serial and network port,

●Encoded transmission: SSL v3.0/TLS v1.0 - DES (56-bit), 3DES (168-bit), AES (128/256-bit),

ADA-14110

●Operating in modes: virtual serial port, serial bridge TCP, serial bridge UDP, TCP or UDP socket, MODBUS Data Gateway,

●Transmitted RS232 signals: a) for version without interface isolation: Rx, Tx, RTS, CTS, DTR, DSR, DCD, b) for version with

interface isolation: Rx, Tx, RTS,

●Baud rate of RS232 (bps): 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 14400, 19200, 28800, 38400,

57600, 115200, 230400,

●RS232 data format: number of data bits: 5, 6, 7, 8; Parity control: None, Odd, Even, Constantly 1, Constantly 0; Stop Bits: 1, 2,

●Transparent for all protocols which data format is compatible with above specification of RS232 interface eg. MODBUS, DNP,

PROFIBUS and other,

●Implemented protocol converter MODBUS-TCP to MODBUS-RTU/ASCII (MODBUS Data Gateway),

●Operating in the mode MODBUS-RTU Master/Slave and MODBUS-ASCII Master/Slave,

●Connection of the RS-232 interface via DSUB-9M (male) connector,

●Stable external power supply 10 - 30 VDC,

●Up to 4W power consumption,

●~3kV= optoisolation between interfaces RS232 and Wi-Fi (version 2-way isolation),

●1kV= or 3kV= galvanic isolation between RS232 interface and power supply (version 2-way isolation),

●1000V= or 3000V= galvanic isolation between RS232 interfaces and power supply,

●Protection against power supply reverse connection,

●DIN 43880 standard - mounting in typical electro-installation unit,

●Rail mounting according to DIN35 / TS35 standard,

●Dimensions (W x D x H) 53mm x 62mm x 90mm,

●Antenna dimensions: length 110mm, diameter 9mm.

2.2. DESCRIPTION

The ADA-14110 wireless serial server transmits data between devices equipped with the RS232 interface via the wireless network

WLAN. The data transmission is without the interference into the format of transmitted data. The operating in the Wi-Fi WLAN wireless

network can be in the virtual serial port mode (port server), MODBUS Data Gateway, TCP and UDP serial bridge, TCP and UDP

socked. The MODBUS Data Gateway converts protocols MODBUS-RTU master/slave and MODBUS-ASCII master/slave to MODBUS-

TCP protocol and reverse. It lets to integrate devices MODBUS-RTU/ASCII with MODBUS-TCP devices in one network. ADA-14110

supports protocols such as: TCP, UDP, DHCP, SNMP, SSL/TLS, Telnet, Rlogin, LPD, HTTP/HTTPS, SMTP, ICMP, IGMP, ARP. The

server has WWW server for remote configuration and management by the use of internet browser and has the baud rate up to

230,4kbps.

This device has standard DB-9M (male) connector for RS232 interface, screw terminal block for connection of power supply and SMA

for aerial Wi-Fi network. ADA-14110 use signals as follow: Rx, Tx, RTS, CTS, DTR, DSR, DCD of RS232 interface and to this interface

can be connected telephone switchboards, barcode scanners, modems, scales, magnetic card readers, etc.

It is adapted to supply an external voltage source in scope from 10V= to 30V= and 4W power. The server has protection against

power supply reverse connection and ESD 15kV short-circuit protection and surge on RS232 interface lines.

The range of transmission in the wireless network Wi-Fi (IEEE 802.11b) :

- in buildings from 30m to 150m,

- in open area to 300m,

The transmission range can be increased after the application of additional directional antennas.

ADA-14110 is sold with drivers, which after installation, create in operating system additional COM port on the next free number e.g.

COM3. It can be use as standard COM port but it isn't hardware port but virtual, create in Windows system. This is the reason why

some applications running in DOS and use this port, can operate improperly.

Fig. 1. ADA-14110 vie Fig. 2.Vie of Wi-Fi and po er connectors

ADA-14110

ACT

Network activity

transmitting / receiving

LINK

Connection activity

- +

SMA connector

of Wi-Fi interface

58mm

7 mm

90mm

53mm

10mm

Vss-

Vss+

LINK

RST

(Wi-Fi)

ACT

10mm

Version ith RS232 interface

isolation

ADA-14110

PWRTXRXRTSCTSDTRDSR

RS-232

DCD

RS-232 to Wi-Fi

WIRELESS SERIAL SERVER

(RS-232)

90mm

53mm

10mm

Vss-

Vss+

LINK

RST

(Wi-Fi)

ACT

10mm

(RS-232)

Version ithout RS232 interface

isolation

ADA-14110

PWRTXRXRTS

RS-232

RS-232 to Wi-Fi

WIRELESS SERIAL SERVER

2.3. WIRELESS NETWORK COMMUNICATIONS (WLAN)

2.3.1. COMMUNICATIONS IN THE TCP/UDP SOCKETS MODE

Communication in the mode TCP/UDP sockets allows an application (SCADA, MMI) to transfer data to the serial port of ADA-14110

via Wi-Fi network, by the use client and server TCP/UDP services.

2.3.2. COMMUNICATIONS IN THE VIRTUAL SERIAL PORT MODE (RealPort)

Communication in the virtual serial port mode allows an application (SCADA, MMI) to transfer data to the serial port of ADA-14110 via

Wi-Fi network, by the use virtual COM port, created in an operating system.

2.3.3. COMMUNICATIONS IN THE SERIAL BRIDGE MODE

Communication in the serial bridge mode allows to transfer data via Wi-Fi network between serial ports of the servers port in one-to-

one topology or one-to-many by the use client and server TCP/UDP services.

2.3.4. COMMUNICATIONS IN THE INDUSTRIAL AUTOMATION MODE (Modbus Gate ay)

Communication in the MODBUS Gateway (IA) mode allows to convert MODBUS-RTU master/slave protocol and MODBUS-ASCII

master/slave protocol to MODBUS-TCP protocol and inversely. It's let to integrate MODBUS-RTU/ASCII devices with MODBUS-TCP

devices in a single network.

2.3.5. OTHER COMMUNICATION TYPES

The ADA-14110 port server can be configured in other communication types, like:

–terminal mode,

–modem emulation mode,

–console mode,

–user mode.

2.4. ISOLATION

The ADA-14110 has not the galvanic isolation or has 2-way, 1kV= or 3kV= galvanic isolation (depend on version, described in section

VERSIONS).

Fig. 3. Isolation diagram

3. INSTALLATION

This chapter will show how to connect the ADA-14110 to RS232 bus, Wi-Fi wireless network (WLAN) and power supply and how to

use it.

To reduce disturbance from environment, it is recommended to:

–use multipair type shielded cables, which shield can be connected to the earthing on one end of the cable,

–use the suitable diameter cable for power supply on account of voltage drop,

–use the powering cable with a suitable section because of the voltage drops,

–use the interference eliminators for powering the converter,

–lay signal cables at a distance of not less than 25 cm away from power cables,

–not powering the converters form the power-circuit of devices generate large impulse disturbance like contactors, relays, inverters.

ADA-14110

Power Supply

10 - 30VDC

Wi-FiR232

2-WAY ISOLATION

Power Supply

10 - 30VDC

Wi-FiR232

WITHOUT ISOLATION

3.1. ASSEMBLING

The ADA-14110 case is adapted to assembly on TS-35 (DIN35) rail. To install converter should mount device on the rail upper part of

the case then press bottom part to to hearing characteristic „Click” sound.

Attention!!

Do not install Wi-Fi devices at a distance of less than 20cm from each other.

3.2. CONNECTION TO WI-FI WIRELESS NETWORK (WLAN)

Connection of the ADA-14110 to WI-FI wireless network (WLAN) can be done by the use of a devices like ACCESS-POINT, ROUTER

Wi-Fi or directly to computer, equipped with Wi-Fi card or other ADA-14110 port server.

In the connector of Wi-Fi interface of the serial server are two diodes (fig.2):

–ACT green, signalling the state of data transferring or receiving,

–LINK orange, signalling the active network connection.

Wireless Serial Server ADA-14110 can be use like :

–virtual serial port [RealPort],

–TCP serial bridge,

–UDP serial bridge,

The factory default settings of the ADA-14110 is:

–to connect to any free wireless network Wi-Fi. Therefore should be set the lowest, free channel of wireless transmission in the

setting of devices like ACCESS-POINT, ROUTER Wi-Fi, Wi-Fi card.

–to downloading the IP address from DHCP server. Therefore if there is not the DHCP server, to change IP address should be used

ADAFinder software (see p.5.1).

Details of the connection to wireless network will be described in the bellow chapters.

3.2.1. CONNECTION OF THE WIRELESS SERIAL SERVER TO COMPUTER BY THE USE OF

WIRELESS NETWORK ADAPTER

If there is not Access-POINT or Wi-Fi Router, the ADA-14110 can be connected directly to computer by the use of wireless network

adapter as on the figure below. Recommended network adapters USB to Wi-Fi:

–PENTAGRAM HORNET P6132-30,

–PENTAGRAM HORNET P6132-08,

–or other, operating in mode: Client Wi-Fi or Access Point (AP).

For configuration of the ADA-14110 wireless serial server, set wireless network adapter in the Access Point mode and make the

configuration as below:

–SSID adapter name: no name,

–channel: 1,

–authentication: non,

–encryption: non.

Power the ADA-14110 and when will connect to wireless network adapter run the ADAFinder software and make the initial

configuration according to pt. 5.1. INITIAL CONFIGURATION USING ADAFINDER SOFTWARE.

Fig. 4. Connection AD-HOC type bet een ADA-14110 and PC

3.2.2. CONNECTION TO COMPUTER VIA NETWORK DEVICES ACCESS-POINT TYPE, ROUTER

WI-FI

Figure below shows correct connection of the ADA-14110 to wireless network WLAN\LAN, by the use ACCESS-POINT, ROUTER Wi-

Fi. This type of connection allows the Wireless Serial Server functioning with PC in virtual serial port mode (RealPort) or TCP/UDP

sockets.

ADA-14110

PC with Wi-Fi adapter ADA-14110

Wi-Fi (802.11b/g) connection,

„Ad-Hoc” type

Fig. 5. Connection the ADA-14110 to WLAN/LAN net ork, functioning in virtual serial port mode or TCP/UDP sockets

3.2.3. CONNECTION TO COMPUTER VIA INTERNET BY THE USE ROUTER WI-FI / DSL

Figure below shows the correct connection of the ADA-14110 to PC via INTERNET, by the use wireless network with devices like

ROUTER Wi-Fi / DSL type. This type of connection allows the Wireless Serial Server functioning with PC in virtual serial port mode

(RealPort) or TCP/UDP sockets.

Fig. 6. Connection to functioning in virtual serial port mode (RealPort) or TCP/UDP sockets via INTERNET

ADA-14110

ROUTER Wi-Fi or

ACCESS POINT / ETHERNET

Wi-Fi (802.11b/g) LAN

Device with

RS232

interface

RS232

PC with Wi-Fi adapter

LAN ETHERNET

Location - B

Device with

RS232 interface

INTERNET

ROUTER Wi-Fi / DSL

Public IP address

Location - A

PC with Wi-Fi adapter

ROUTER Wi-Fi / DSL

Public IP address

ADA-14110

RS232

3.2.4. CONNECTION FOR FUNCTIONING IN MODE TCP/UDP SERIAL BRIDGE

Figures below show correct connection of ADA-14110 to wireless network and INTERNET network to functioning in TCP serial bridge

mode or UDP.

Fig. 7. Connection to functioning in TCP/UDP serial bridge mode, one-to-one in LAN net ork

Fig. 8. Connection to functioning in UDP serial bridge mode, one-to-many in WLAN net ork

ADA-14110

Wi-Fi (802.11b/g) Network, the connection „Ad-Hoc” type between

ADA-14110 Serial Servers.

Functioning in the mode of serial bridge TCP / UDP

Device with

RS232 interface

RS232

ADA-14110

RS232

Device with

RS232 interface

ADA-14110

SLAVE Device

with RS232

interface

RS232

ADA-14110

Static IP address

RS232

Urządzenie

z interfe sem

RS232

MASTER Device

with RS232

interface

SLAVE Device

with RS232

interface

Wi-Fi (802.11b/g) Network, the connection „Ad-Hoc” type between

ADA-14110 Serial Servers.

Functioning in the mode of serial bridge UDP

Fig. 9. Connection to functioning in TCP or UDP serial bridge mode via INTERNET net ork

3.2.5. CONNECTION OF THE WIRELESS SERIAL SERVER TO FUNCTIONING IN MODBUS

GATEWAY MODE

Figure below shows the correct connection of the ADA-14110 to wireless network Wi-Fi (WLAN) to operating in Industrial

Automation Mode (MODBUS Gate ay). This type of connection allows to integrate the MODBUS-TCP devices and the MODBUS-

RTU/ASCII devices in one network.

Fig. 10. Integration MODBUS-TCP ith MODBUS-RTU/ASCII in one net ork by the use ADA-14110 ith MODBUS Gate ay

ADA-14110

LOCATION - B

Device with

RS232

interface

INTERNET

ROUTER Wi-Fi / DSL

Public IP address

LOCATION - A

ROUTER Wi-Fi / DSL

Public IP address

ADA-14110 RS232

Device with

RS232

interface

ADA-14110 RS232

RS485 Bus

MODBUS-RTU/ASCII

ROUTER Wi-Fi / ETHERNET

PC with the SCADA / HMI

software

ADA-14040

MODBUS Gateway

ADA-14110

MODBUS Gate ay

RS232

MODBUS-RTU/ASCII

PLC

MASTER

MODBUS-TCP

LAN ETHERNET

LAN \ WLAN

Created on the ROUTER

Indice

Altri manuali CEL-MAR Server

CEL-MAR

CEL-MAR ADA-14040 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente