Chicago Electric 93632 Manuale di installazione

1/2” HEAVY-DUTY LOW

SPEED VSR DRILL

Model

93632

SET UP AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Manual Revised 09a, 09l

Page 2 For technical questions, please call 1-800-444-3353. SKU 93632

SAVE THIS MANUAL

Keep this manual for the safety warnings

and precautions, assembly, operating, inspec-

tion, maintenance and cleaning procedures.

Write the product’s serial number in the back

of the manual near the assembly diagram (or

month and year of purchase if product has no

number). Keep this manual and the receipt in

a safe and dry place for future reference.

IMPORTANT SAFETY

INFORMATION

In this manual, on the labeling, and

all other information provided with

this product:

This is the safety alert

symbol. It is used to alert

you to potential personal

injury hazards. Obey all

safety messages that follow

this symbol to avoid possible

injury or death.

DANGER indicates a

hazardous situation

which, if not avoided, will result

in death or serious injury.

WARNING indicates a

hazardous situation

which, if not avoided, could

result in death or serious injury.

CAUTION, used with

the safety alert

symbol, indicates a hazardous

situation which, if not avoided,

could result in minor or moderate

injury.

NOTICE is used to

address practices not

related to personal injury.

CAUTION, without the

safety alert symbol, is

used to address practices not

related to personal injury.

General Power Tool Safety Warnings

WARNING Read all safety warnings

and instructions. Failure to follow the

warnings and instructions may result

in electric shock, re and/or serious

injury.

Save all warnings and instructions

for future reference.

The term ″power tool″ in the warnings

refers to your mains-operated (corded)

power tool or battery-operated

(cordless) power tool.

Work area safety1.

Keep work area clean and well lit.a.

Cluttered or dark areas invite accidents.

Do not operate power tools in ex-b.

plosive atmospheres, such as in the

presence of ammable liquids, gases

or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders awayc.

while operating a power tool. Distrac-

tions can cause you to lose control.

Electrical safety2.

Power tool plugs must match the out-a.

let. Never modify the plug in any way.

Do not use any adapter plugs with

grounded power tools. Unmodied

plugs and matching outlets will reduce

risk of electric shock.

Avoid body contact with groundedb.

surfaces such as pipes, radiators,

ranges and refrigerators. There is an

increased risk of electric shock if your

body is grounded.

Page 3For technical questions, please call 1-800-444-3353.SKU 93632

Do not expose power tools to rain orc.

wet conditions. Water entering a power

tool will increase the risk of electric

shock.

Do not abuse the cord. Never use thed.

cord for carrying, pulling or unplug-

ging the power tool. Keep cord away

from heat, oil, sharp edges or moving

parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool out-e.

doors, use an extension cord suitable

for outdoor use. Use of a cord suitable

for outdoor use reduces the risk of elec-

tric shock.

If operating a power tool in a dampf.

location is unavoidable, use a Ground

Fault Circuit Interrupter (GFCI) pro-

tected supply. Use of a GFCI reduces

the risk of electric shock.

Personal safety3.

Stay alert, watch what you are doinga.

and use common sense when operat-

ing a power tool. Do not use a power

tool while you are tired or under the

inuence of drugs, alcohol or medica-

tion. A moment of inattention while op-

erating power tools may result in serious

personal injury.

Use personal protective equipment.b.

Always wear eye protection. Safety

equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing pro-

tection used for appropriate conditions

will reduce personal injuries.

Prevent unintentional starting. En-c.

sure the Trigger is in the off-position

before connecting to power source,

picking up or carrying the tool. Car-

rying power tools with your nger on the

Trigger or energizing power tools that

have the Trigger on invites accidents.

Remove any adjusting key or wrenchd.

before turning the power tool on. A

wrench or a key left attached to a rotat-

ing part of the power tool may result in

personal injury.

Do not overreach. Keep proper foot-e.

ing and balance at all times. This

enables better control of the power tool

in unexpected situations.

Dress properly. Do not wear loosef.

clothing or jewelry. Keep your hair,

clothing and gloves away from mov-

ing parts. Loose clothes, jewelry or long

hair can be caught in moving parts.

If devices are provided for the con-g.

nection of dust extraction and col-

lection facilities, ensure these are

connected and properly used. Use of

these devices can reduce dust-related

hazards.

Only use safety equipment that hash.

been approved by an appropriate

standards agency. Unapproved safety

equipment may not provide adequate

protection. Eye protection must be

ANSI-approved and breathing protection

must be NIOSH-approved for the specic

hazards in the work area.

Power tool use and care4.

Do not force the power tool. Use thea.

correct power tool for your applica-

tion. The correct power tool will do the

job better and safer at the rate for which

it was designed.

Do not use the power tool if the Trig-b.

ger does not turn it on and off. Any

power tool that cannot be controlled with

the Trigger is dangerous and must be

repaired.

Disconnect the plug from the powerc.

source and/or the battery pack from

the power tool before making any ad-

justments, changing accessories, or

Page 4 For technical questions, please call 1-800-444-3353. SKU 93632

storing power tools. Such preventive

safety measures reduce the risk of start-

ing the power tool accidentally.

Store idle power tools out of the reachd.

of children and do not allow per-

sons unfamiliar with the power tool

or these instructions to operate the

power tool. Power tools are dangerous

in the hands of untrained users.

Maintain power tools. Check fore.

misalignment or binding of moving

parts, breakage of parts and any other

condition that may affect the power

tool’s operation. If damaged, have the

power tool repaired before use. Many

accidents are caused by poorly main-

tained power tools.

Keep cutting tools sharp and clean.f.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

Use the power tool, accessories andg.

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

Service5.

Have your power tool serviced by aa.

qualied repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

Drill Safety Warnings

Use auxiliary handles supplied with1.

the tool. Loss of control can cause per-

sonal injury.

Hold power tools by insulated grip-2.

ping surfaces when performing an

operation where the cutting tool may

contact hidden wiring or its own cord.

Contact with a ″live″ wire will make ex-

posed metal parts of the tool ″live″ and

shock the operator.

Let Bits cool before touching, chang-3.

ing or adjusting them. Bits heat up

dramatically while in use, and are ca-

pable of severe burns.

If the drill bit jams, release the trigger4.

immediately; drill torque can cause

injury.

Maintain labels and nameplates on the5.

tool. These carry important safety infor-

mation. If unreadable or missing, con-

tact Harbor Freight Tools for a replace-

ment.

Avoid unintentional starting. Prepare to6.

begin work before turning on the tool.

Do not lay the tool down until it has come7.

to a complete stop. Moving parts can

grab the surface and pull the tool out of

your control.

When using a handheld power tool,8.



hands to resist starting torque.

Do not leave the tool unattended when it9.

is plugged into an electrical outlet. Turn

off the tool, and unplug it from its electri-

cal outlet before leaving.

This product is not a toy. Keep it out of10.

reach of children.

People with pacemakers should consult11.

their physician(s) before use. Electro-



heart pacemaker could cause pace-

maker interference or pacemaker failure.

In addition, people with pacemakers

should:





Page 5For technical questions, please call 1-800-444-3353.SKU 93632



electrical shock.



grounded. Ground Fault Circuit Inter-

rupter (GFCI) should also be imple-

mented – it prevents sustained electrical

shock.

Some dust created by power sand-12.

ing, sawing, grinding, drilling, and other

construction activities, contains chemi-

cals known [to the State of California]

to cause cancer, birth defects or other

reproductive harm. Some examples of

these chemicals are:



-

ment or other masonry products



treated lumber

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to

these chemicals: work in a well ventilat-

ed area, and work with approved safety

equipment, such as those dust masks



microscopic particles. (California Health

& Safety Code § 25249.5, et seq.)

WARNING: Handling the cord on this13.

product will expose you to lead, a chemi-

cal known to the State of California to

cause cancer, and birth defects or other

reproductive harm. Wash hands after

handling. (California Health & Safety

Code § 25249.5, et seq.)

The warnings, precautions, and instruc-14.

tions discussed in this instruction manual

cannot cover all possible conditions and

situations that may occur. It must be

understood by the operator that common

sense and caution are factors which can-

not be built into this product, but must be

supplied by the operator.

Vibration Safety

This tool vibrates during use. Repeated

or long-term exposure to vibration may

cause temporary or permanent physical

injury, particularly to the hands, arms and

shoulders. To reduce the risk of vibra-

tion-related injury:

Anyone using vibrating tools regularly1.



be examined by a doctor and then have

regular medical check-ups to ensure

medical problems are not being caused

or worsened from use. Pregnant women

or people who have impaired blood cir-

culation to the hand, past hand injuries,

nervous system disorders, diabetes, or

Raynaud’s Disease should not use this

tool. If you feel any symptoms related

to vibration (such as tingling, numbness,



advice as soon as possible.

Do not smoke during use. Nicotine re-2.

duces the blood supply to the hands and



related injury.

Wear suitable gloves to reduce the vibra-3.

tion effects on the user.

Use tools with the lowest vibration when4.

there is a choice between different pro-

cesses.

Include vibration-free periods each day5.

of work.

Grip tool as lightly as possible (while still6.



do the work.

To reduce vibration, maintain the tool7.

as explained in this manual. If any

Page 6 For technical questions, please call 1-800-444-3353. SKU 93632

abnormal vibration occurs, stop use

immediately.

SAVE THESE

INSTRUCTIONS.

GROUNDING

TO PREVENT

ELECTRIC SHOCK

AND DEATH FROM INCORRECT

GROUNDING WIRE

CONNECTION:

Check with a qualied electrician

if you are in doubt as to whether

the outlet is properly grounded.

Do not modify the power cord

plug provided with the tool.

Never remove the grounding

prong from the plug. Do not use

the tool if the power cord or plug

is damaged. If damaged, have it

repaired by a service facility

before use. If the plug will not t

the outlet, have a proper outlet

installed by a qualied

electrician.

Grounded Tools: Tools with Three

Prong Plugs

Tools marked with “Grounding Required”1.

have a three wire cord and three prong

grounding plug. The plug must be con-

nected to a properly grounded outlet. If

the tool should electrically malfunction or

break down, grounding provides a low

resistance path to carry electricity away

from the user, reducing the risk of elec-

tric shock.

(See 3-Prong Plug and Outlet.)

The grounding prong in the plug is con-2.

nected through the green wire inside the

cord to the grounding system in the tool.

The green wire in the cord must be the

only wire connected to the tool’s ground-

ing system and must never be attached

to an electrically “live” terminal.

(See 3-Prong Plug and Outlet.)

The tool must be plugged into an ap-3.

propriate outlet, properly installed and

grounded in accordance with all codes

and ordinances. The plug and outlet

should look like those in the preceding

illustration.

(See 3-Prong Plug and Outlet.)

Double Insulated Tools: Tools with

Two Prong Plugs

Tools marked “Double Insulated” do not1.

require grounding. They have a special



OSHA requirements and complies with

the applicable standards of Underwriters

-

dard Association, and the National Elec-

trical Code.

(See Outlets for 2-Prong Plug.)

Page 7For technical questions, please call 1-800-444-3353.SKU 93632

Double insulated tools may be used in2.

either of the 120 volt outlets shown in the

preceding illustration.

(See Outlets for 2-Prong Plug.)

Extension Cords

Grounded1. tools require a three wire

extension cord. Double Insulated tools

can use either a two or three wire exten-

sion cord.

As the distance from the supply outlet2.

increases, you must use a heavier gauge

extension cord. Using extension cords

with inadequately sized wire causes a

serious drop in voltage, resulting in loss

of power and possible tool damage.

(See Table A.)

The smaller the gauge number of the3.

wire, the greater the capacity of the cord.

For example, a 14 gauge cord can carry

a higher current than a 16 gauge cord.

(See Table A.)

When using more than one extension4.

cord to make up the total length, make

sure each cord contains at least the mini-

mum wire size required. (See Table A.)

If you are using one extension cord for5.

more than one tool, add the nameplate

amperes and use the sum to determine

the required minimum cord size.

(See Table A.)

If you are using an extension cord out-6.

doors, make sure it is marked with the



is acceptable for outdoor use.

Make sure the extension cord is properly7.

wired and in good electrical condition.

Always replace a damaged extension



electrician before using it.

Protect the extension cords from sharp8.

objects, excessive heat, and damp or

wet areas.

RECOMMENDED MINIMUM WIRE

GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

AMPERES

(at full load)

EXTENSION CORD

LENGTH

25’

50’

75’

100’

150’

0 – 2.0 18 18 18 18 16

2.1 – 3.4 18 18 18 16 14

3.5 – 5.0 18 18 16 14 12

5.1 – 7.0 18 16 14 12 12

7.1 – 12.0 18 14 12 10 -

12.1 – 16.0 14 12 10 - -

16.1 – 20.0 12 10 - - -

TABLE A

* Based on limiting the line

voltage drop to ve volts at

150% of the rated amperes.

Symbology

Double Insulated

Canadian Standards Association



V~ Volts Alternating Current

AAmperes

n0xxxx/min. 

(RPM)

Page 8 For technical questions, please call 1-800-444-3353. SKU 93632

SPECIFICATIONS

Electrical Requirements 120 V~ / 60 Hz / 7.5 A

 0 - 550 RPM

Drilling Capacity 2” Wood,

1/2” Mild Steel

Chuck 1/2” Capacity, Keyed

Chuck Spindle 1/2” 20 UNF

E194601

39LH

UNPACKING

When unpacking, make sure that the

item is intact and undamaged. If any parts

are missing or broken, please call Harbor

Freight Tools at the number shown on the

cover of this manual as soon as possible.

REV 09l

Page 9For technical questions, please call 1-800-444-3353.SKU 93632

INSTRUCTIONS FOR PUTTING

INTO USE

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before set up

or use of this product.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Trigger of the tool to its

“OFF” position and unplug the

tool from its electrical outlet

before assembling or making any

adjustments to the tool.

Note: For additional information regarding the

parts listed in the following pages, refer

to the Assembly Diagram near the end of

this manual.

Note: In some cases, due to variations in

packaging, you may have to install the

Spade Handle and Auxiliary Handle.

Align the Spade Handle (31) with the1.

Back Case (32). Insert the Spade Handle

Knob (30) through the Spade Handle into

the Back Case. Tighten the Spade Han-

dle Knob by turning clockwise until tight.

Insert the Screw (14) through the Side2.

Handle (15). Position the Side Handle

on the Gear Housing Cover (22). Using

a screwdriver (not included) tighten the

Screw (14) until tight.

Note: Periodically check to be sure the

handles remain tight. Do not reposition

the handles while the tool is running or

plugged in.

Features

Chuck

Side

Handle

Spade

Handle

Trigger Lock

Direction Switch

Speed Control Trigger

This tool incorporates a double gear re-

duction transmission to reduce drill speed

while increasing torque. This design

improves performance when drilling large

holes. This feature also helps prevent

the tool from “bogging down” or stopping

when under heavy load.

Page 10 For technical questions, please call 1-800-444-3353. SKU 93632

OPERATING INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before set up

or use of this product.

Tool Set Up -

Installing Drill Bits

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Trigger of the tool to its

“OFF” position and unplug the

tool from its electrical outlet

before assembling or making any

adjustments to the tool.

Drill Bits (not included) come in various1.

sizes and types. Various types include

low and high speed twist bits for metals,

spade or brad point bits for wood, forst-



or plastic, auger bits for boring through



and dry wall, etc. Select the appropriate

drill bit.

Unplug the tool.2.

By hand, rotate the outer ring of the3.

Chuck counterclockwise to open it

enough to allow the bit to be inserted.

Use the Chuck Key if needed. Insert the

bit fully into the Chuck jaws and center it.

By hand, rotate the outer ring of the4.

Chuck clockwise to tighten on the bit.

Make sure the bit is still centered in the

Chuck.

Insert the tip of the Chuck Key into one5.

of the openings drilled into the side of the

Chuck. Engage the gears of the Chuck

Key with the gear teeth on the outside

of the Chuck. Turn the Chuck Key clock-

wise to tighten the jaws of the Chuck



CAUTION: Make sure the drill bit is centered

-

ginning work.

Altri manuali per 93632

Indice

Altri manuali Chicago Electric Trapano

Chicago Electric

Chicago Electric 94434 Manuale utente

Chicago Electric

Chicago Electric 97907 Manuale di installazione

Chicago Electric

Chicago Electric 93632 Manuale di istruzioni

Chicago Electric

Chicago Electric 98179 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 66127 Manuale di installazione

Chicago Electric

Chicago Electric 95877 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 60495 Istruzioni per il montaggio

Chicago Electric

Chicago Electric Chicago 44849 Manuale del proprietario

Chicago Electric

Chicago Electric 1/2" variable Speed Reversible HEAVY DUTY DRILL... Istruzioni per il montaggio

Chicago Electric

Chicago Electric 42564 Manuale utente

Chicago Electric

Chicago Electric 67616 Manuale di istruzioni originale

Chicago Electric

Chicago Electric 45338 Manuale utente

Chicago Electric

Chicago Electric 93449 Manuale utente

Chicago Electric

Chicago Electric 93632 Manuale utente

Chicago Electric

Chicago Electric 45338 Manuale di installazione

Chicago Electric

Chicago Electric 60495 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 69360 Manuale di installazione

Chicago Electric

Chicago Electric 69452 Istruzioni per il montaggio

Chicago Electric

Chicago Electric 68126 Manuale di installazione

Chicago Electric

Chicago Electric 66006 Manuale di installazione

Chicago Electric

Chicago Electric 1/2" variable Speed Reversible HEAVY DUTY DRILL... Istruzioni per il montaggio

Chicago Electric

Chicago Electric 47991 Manuale elenco delle parti

Chicago Electric

Chicago Electric 68169 Manuale di installazione

Chicago Electric

Chicago Electric 98179 Manuale di installazione

Manuali Trapano popolari di altre marche

Makita

Makita BDF456 Manuale utente

Black & Decker

Black & Decker LDX220 Manuale utente

Hitachi

Hitachi DH 40MA Manuale utente

Challenge

Challenge JO Manuale tecnico di riferimento

Makita

Makita LXFD01 Manuale utente

Festool

Festool T18+3 Manuale utente

Milwaukee

Milwaukee M12 FPDX-202X Manuale utente

EINHELL

EINHELL TE-RH 32 E Manuale utente

Makita

Makita DHP484 Manuale utente

Makita

Makita FD05 Manuale utente

Bosch

Bosch PSB 530 RA Manuale utente

Maximum

Maximum 054-1359-4 Manuale utente

Makita

Makita HP332D Manuale utente

Raider

Raider RDP-HD31H Manuale utente

Bort

Bort BPM-1400x2 Manuale utente

Black & Decker

Black & Decker 7266 Manuale utente

KENT USA

KENT USA TRD1230 Manuale utente

Bosch

Bosch GSB 19-2 RE Manuale utente