Cisco B200 M3 Manuale utente

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco B200 M3 Blade Server

Statement of Volatility

Publication Date: November 19, 2013

The Cisco B200 M3 blade server has multiple serial, electrically erasable, and programmable nonvolatile

memory components (EEPROM and Flash memory) that are used to store manufacturing hardware

identification and hardware configuration information. The majority of serial EEPROMs and flash

memories are not written by users and contain no customer information. Procedures for clearing the few

flash devices that can retain customer data are included in this document.

•Restoring the BIOS to the Factory Default Settings

•Restoring the LSI SAS Controller to the Factory Default Settings

•Restoring the CIMC to the Factory Default Settings

•Resetting the CMOS From UCS Manager

Restoring the BIOS to the Factory Default Settings

Use the following procedure to restore the BIOS to the factory default settings through the UCS Manager

remote KVM or a local KVM I/O cable that is connected directly to the blade server.

Step 1 Press F2 to access the BIOS setup.

Step 2 Click the Save and Exit tab.

Step 3 On the Save and Exit tab, click Load Default Values.

Step 4 Click Yes.

Step 5 Click Save and Exit or press F10.

Step 6 Click Yes to reboot the blade server.

Cisco B200 M3 Blade Server Statement of Volatility

Restoring the LSI SAS Controller to the Factory Default Settings

Use the following procedure to restore the LSI SAS controller to the factory default settings through the

UCS Manager remote KVM or a local KVM I/O cable that is connected directly to the blade server.

Step 1 Press Ctrl-H to log on to the web GUI.

Step 2 Click Start.

Step 3 Click the Controller Properties tab.

Step 4 Click Next.

Step 5 Click Set Factory Defaults.

Step 6 Click Yes.

Step 7 Click Submit.

Step 8 Press Ctrl-Alt-Delete to reboot the blade server.

Restoring the CIMC to the Factory Default Settings

Use the following procedure to restore the Cisco Integrated Management Controller (CIMC) to the

factory default settings.

Step 1 Shut down the blade server to power it down.

Step 2 Remove the blade server from the chassis for 30 seconds or longer to turn off the standby power.

Step 3 Insert the blade server back into the chassis to power it on, which will automatically reboot the CIMC

and restore it to its factory default settings.

Resetting the CMOS From UCS Manager

Use the following procedure to reset the CMOS from UCS Manager.

Step 1 In the UCS Manager navigation window, click the Equipment tab.

Step 2 On the Equipment tab, choose Equipment > Chassis > Chassis Number > Servers.

Step 3 Choose the server on which you want to reset the CMOS.

Step 4 In the Work pane, click the General tab.

Step 5 In the Actions area, click Recover Server.

Step 6 In the Recover Server dialog box, click Reset CMOS and then click OK.

Indice

Altri manuali Cisco Server

Cisco

Cisco Firepower 2100 Series Manuale

Cisco

Cisco C880 M4 Manuale utente

Cisco

Cisco C880 M4 Istruzioni per il montaggio

Cisco

Cisco Expressway CE1200 Manuale utente

Cisco

Cisco 6400 Manuale utente

Cisco

Cisco UCS C24 Istruzioni di installazione e manutenzione

Cisco

Cisco TelePresence Manuale di servizio

Cisco

Cisco UCS B22 M3 Manuale utente

Cisco

Cisco UCS C220 M3 Manuale di installazione e funzionamento

Cisco

Cisco MSE 3365 Manuale utente

Cisco

Cisco UCS B420 M4 Manuale utente

Cisco

Cisco Nexus 7000 Series Manuale utente

Cisco

Cisco Catalyst 6800 Manuale utente

Cisco

Cisco TelePresence Manuale di servizio

Cisco

Cisco Sourcefire Defense Center 750 Manuale utente

Cisco

Cisco UCS B200 M3 Manuale utente

Cisco

Cisco UCS Invicta C3124SA Manuale

Cisco

Cisco UCS B420 M3 Manuale di installazione e funzionamento

Cisco

Cisco UCS C200 M2 Manuale del sistema

Cisco

Cisco UCS B22 M3 Manuale

Cisco

Cisco UCS B440-M1 Guida rapida

Cisco

Cisco GSS-4492R-K9 Manuale di istruzioni

Cisco

Cisco VPN 3002 Hardware Client Manager Manuale utente

Cisco

Cisco UCS 5100 Manuale

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente