Cisco C460 M4 Manuale utente

Indice

Altri manuali Cisco Server

Cisco

Cisco UCS C240 Manuale utente

Cisco

Cisco 7835-H2 - Media Convergence Server Manuale utente

Cisco

Cisco UCS C200 M2 Manuale del sistema

Cisco

Cisco UCS C Series Manuale di istruzioni

Cisco

Cisco UCS C240 M4 Istruzioni di installazione e manutenzione

Cisco

Cisco UCS C Series Manuale utente

Cisco

Cisco UCS 5100 Manuale

Cisco

Cisco UCS C220 M3 Manuale utente

Cisco

Cisco UCS C220 M4 Istruzioni di montaggio

Cisco

Cisco UCS C240 M3 Guida rapida

Cisco

Cisco TelePresence MSE 8710 Manuale utente

Cisco

Cisco TelePresence Manuale di servizio

Cisco

Cisco UCS C200 Istruzioni di installazione e manutenzione

Cisco

Cisco TelePresence Server 7010 Scheda tecnica

Cisco

Cisco TelePresence Manuale di servizio

Cisco

Cisco UCS B460 M4 Manuale utente

Cisco

Cisco UCS C Series Istruzioni per il montaggio

Cisco

Cisco CRS-16 DC Manuale di istruzioni

Cisco

Cisco TelePresence Server 7010 Manuale utente

Cisco

Cisco UCS C240 M5 Istruzioni di installazione e manutenzione

Cisco

Cisco UCS C240 M4 Istruzioni di installazione e manutenzione

Cisco

Cisco UCS B200 M3 Manuale

Cisco

Cisco UCS S3260 M5 Guida

Cisco

Cisco UCS C220 M4 Manuale utente

Manuali Server popolari di altre marche

HP

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente

Contents

Introduction

Problem

Potentially Impacted Systems:

Customer Visibility / Impact:

Solution

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Work Around 2 - Resetting to Factory Defaults via IMC CLI

Introduction

The intent of this document is to address the issue seen regarding Trusted Platform Module (TPM)

related System Event Logs (SEL) events on some C460 M4 servers. A small number of C460 M4

SPARE servers will see a critical SEL event related to TPM presence right out of the factory. The

instructions below will assist you in resolving servers impacted by this issue.

Problem

Potentially Impacted Systems:

About 614 SPARE C460 M4 Systems (Shipped between June 2nd 2014, and April 13th 2016.)

Customer Visibility / Impact:

Customers may see a critical SEL event similar to the one below on servers received from the

factory.

There is NO operational impact to the server, but the message may lead to unessary concern

resulting in a call to TAC. This has to do with the way TPMs were handeled in manufacturing.

C460 M4 systems keep a "Cached" value for TPM presence, indicating if a TPM was was ever

installed in the server - every server has a TPM installed durring testing. The C460 M4 also tracks

the current precense of the TPM, and since all servers ordered as spares ship without a TPM, the

system triggers an alarm thinking that the module that was once installed has been removed.

Solution

The work-arround below will allow you to quickly address this SEL event should you wish to

remove the messages. The work-arround involves resetting the Integrated Management Controller

(IMC) to factory default settings, clearing any cached TPM Presence value.

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Resting to Factory Defaults via IMC WebUI

Point a browser to the IMC IP, login, and navigate to the Admin --> Utilities tab1. Click the "Reset Cisco IMC to Factory Default Configuration" as shown in the image below.2.

3. You will be prompted with a pop up box. Click OK to proceed.

Note: The IMC will reset completely and you will need to reconfigure all settings. Please record

any information prior to the reset.

Work Around 2 - Resetting to Factory Defaults via IMC CLI

SSH to the IMC IP using the user's credentials.1. Type the following commands as shown below:2.

a. scope cimc

b. factory-default

3. Enter "y" to continue.

Note: The IMC will reset completely and you will need to reconfigure all settings.

Please record any information prior to the reset.