Clarke CAF304 Manuale di istruzioni

OPERATION & MAINTENANCE

INSTRUCTIONS

GC0519 - rev 3

ORIGINAL INSTRUCTIONS

AXIAL PLATE FANS

MODEL NO: CAF304,354,404,454,506,556 & 606

PART NO: 3230110, 3230110,3230120,3230130,3230140,3230150 &3230160

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Axial Plate Fan.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GENERAL SAFETY WARNINGS

1. Please keep these instructions in a safe place for future reference.

2. Never carry out any alterations or modifications to this product.

3. Inspect the power cable and plug for damage and ensure that no

connections are loose. Do not use this unit if it has a damaged supply

cable. Any damage should be properly repaired or the part replaced.

4. Do not use adaptor plugs with earthed (grounded) appliances. Correct

plugs and outlets will reduce the risk of electric shock.

5. Position the power cable so that it cannot be inadvertently pulled or

pinched and where it does not cause a trip hazard.

6. Disconnect from the power supply when not in use.

7. Never abuse the mains cable or wrench the cable to disconnect it from

the socket. Keep the cable away from sharp edges/hot surfaces.

8. Store this product in a dry, secure place out of reach of children.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TECHNICAL DATA (DIMENSIONS IN MM)

PERFORMANCE

Model A B C D E F G H

CAF304 400 350 25 315 45 15 195 255

CAF354 450 400 25 365 45 15 238 298

CAF404 500 450 25 420 45 15 238 298

CAF454 550 500 25 470 45 15 247 306

CAF506 600 550 25 520 45 15 273 332

CAF556 680 630 25 570 45 15 247 307

CAF606 730 680 25 620 45 15 273 332

Model RPM Power kW Sound Power

Level db(A)

Sound Pressure Level

at 3M (db(A)

CAF304 1400 0.06 72 55

CAF354 1400 0.18 76 59

CAF404 1400 0.25 75 58

CAF454 1400 0.36 80 63

CAF506 900 0.18 73 56

CAF556 900 0.25 76 59

CAF606 800 0.36 80 73

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

EFFICIENCY DATA (Note; no grade efficiency if power of fan <125W).

Model CAF 304

1Overall efficiency n 32.5

2Measurement category used to determine the energy efficiency (A-D) A

3Efficiency category (static or total) STATIC

4Efficiency grade at optimum energy efficiency point n/a

5Whether the calculation of fan efficiency assumed use of a VSD and if

so, whether the CSD is integrated within the fan or the VSD must be

installed within the fan.

Without

VSD

Model CAF 354

1Overall efficiency n 32

2Measurement category used to determine the energy efficiency (A-D) A

3Efficiency category (static or total) STATIC

4Efficiency grade at optimum energy efficiency point 43

5Whether the calculation of fan efficiency assumed use of a VSD and if

so, whether the CSD is integrated within the fan or the VSD must be

installed within the fan.

Without

VSD

Model CAF 404

1Overall efficiency n 33.5

2Measurement category used to determine the energy efficiency (A-D) A

3Efficiency category (static or total) STATIC

4Efficiency grade at optimum energy efficiency point 43.5

5Whether the calculation of fan efficiency assumed use of a VSD and if

so, whether the CSD is integrated within the fan or the VSD must be

installed within the fan.

Without

VSD

Model CAF 454

1Overall efficiency n 36

2Measurement category used to determine the energy efficiency (A-D) A

3Efficiency category (static or total) STATIC

4Efficiency grade at optimum energy efficiency point 44

5Whether the calculation of fan efficiency assumed use of a VSD and if

so, whether the CSD is integrated within the fan or the VSD must be

installed within the fan.

Without

VSD

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Model CAF 506

1Overall efficiency n 32.5

2Measurement category used to determine the energy efficiency (A-D) A

3Efficiency category (static or total) STATIC

4Efficiency grade at optimum energy efficiency point 42.5

5Whether the calculation of fan efficiency assumed use of a VSD and if

so, whether the CSD is integrated within the fan or the VSD must be

installed within the fan.

Without

VSD

Model CAF 556

1Overall efficiency n 48

2Measurement category used to determine the energy efficiency (A-D) A

3Efficiency category (static or total) STATIC

4Efficiency grade at optimum energy efficiency point 57

5Whether the calculation of fan efficiency assumed use of a VSD and if

so, whether the CSD is integrated within the fan or the VSD must be

installed within the fan.

Without

VSD

Model CAF 606

1Overall efficiency n 58

2Measurement category used to determine the energy efficiency (A-D) A

3Efficiency category (static or total) STATIC

4Efficiency grade at optimum energy efficiency point 66

5Whether the calculation of fan efficiency assumed use of a VSD and if

so, whether the CSD is integrated within the fan or the VSD must be

installed within the fan.

Without

VSD

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Before switching the product on, make sure that the voltage of your electricity supply is

the same as that indicated on the rating plate. This product is designed to operate on

230VAC 50Hz. Connecting it to any other power source may cause damage.

This product may be fitted with a non-rewireable plug. If it is necessary to change the

fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or

damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due to

damage, it should be cut off and a replacement fitted, following the wiring instructions

shown below. The old plug must be disposed of safely, as insertion into a mains socket

could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond with the

markings on the terminals of your plug, proceed as follows.

•TheBlue wire must be connected to the terminal which is marked Nor

coloured Black.

•TheBrown wire must be connected to the terminal which is marked Lor

coloured Red.

•TheYellow and Green wire must be connected to the terminal which is

marked E or or coloured Green.

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS

SUPPLY.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE

COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

BLUE = NEUTRAL BROWN = LIVE YELLOW AND GREEN = EARTH

Plug must be BS1363/A approved.

Always fit a 3 Amp fuse.

Ensure that the outer sheath of the cable is firmly held by the clamp

Neutral

(Blue)

Live

(Brown)

Earth

(Green and Yellow)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DIRECTION OF AIRFLOW

To achieve air flow direction A or B

(fig 1), the fan should be wired as

shown in fig 2. (A similar diagram is

also included inside the fan motor

terminal box).

Fig 1

TERMINAL BOX CONNECTIONS

Consult a qualified

electrician if you are in

any doubt about the

electrical connection of

this fan.

Fig 2

INSTALLATION

1. Before Installation, ensure that the impeller has not been damaged or

distorted during transit.

2. Check that the impeller rotates freely and is secured tightly to the shaft. If

the tip clearance of the blades is not sufficient slacken the motor boltsand

re-align.

3. Mount the fan securely using the 4 bolt holes provided in the outer casing.

4. Ensure that the installation is free from any vibration which could damage

the impeller or motor bearings.

5. Ensure that when installed the impeller side of the fan cannot be touched

i.e. if this is not covered by ducting or cowling, then the optional side guard

must be fitted.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

IMPORTANT: If a fan (without louvre shutters) is used for a reversible airflow,

the fan must always be completely stopped before changing direction.

6. Refer to the section on electrical connection for guidance on wiring for air

flow direction.

MAINTENANCE

1. Check that the impeller and motor bolts and nuts are fully tightened within

the first 100 hours of use, and periodically after this.

2. Ensure that the impeller, motor and fan housing are kept clean. This is

important for the ongoing safe use of this fan.

3. Periodically check that the fan installation is free from corrosion.

4. Store in a dry place protected from the weather.

Your CLARKE fan has been designed to give long and trouble free service. If,

however, having followed the instructions in this booklet carefully, you

encounter problems, take the unit to your local CLARKE dealer.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognized disposal

facility.

At the end of its working life, do not dispose of this product or its components

with general household waste. Any tools, accessories and packaging should

be sorted, taken to a recycling centre and disposed of appropriately.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

REPLACEMENT PARTS

All replacement part numbers begin with the prefix 3230.

NODESCRIPTION CAF304 CAF354 CAF404 CAF454 CAF506 CAF556 CAF606

1WireGuard 102 112 122 132 142 152 162

2AssyScrews 103 113 123 133 143 153 163

2.1 Nut 103A 113A 123A 133A 143A 153A 163A

2.2 Washer 103B 113B 123B 133B 143B 153B 163B

2.3 Washer 103C 113C 123C 133C 143C 153C 163C

2.4 Washer 103D 113D 123D 133D 143D 153D 163D

3 Fan Plate 104 114 124 134 144 154 164

4Impeller 105 115 125 135 145 155 165

4.1 Bolt 105A 115A 125A 135A 145A 155A 165A

4.2 Washer 105B 115B 125B 135B 145B 155B 165B

4.3 Washer 105C 115C 125C 135C 145C 155C 165C

5 Motor Guard 106 116 126 136 146 156 166

6AssyScrews 107 117 127 137 147 157 167

6.1 Nut 107A 117A 127A 137A 147A 157A 167A

6.2 Washer 107B 117B 127B 137B 147B 157B 167B

6.3 Anti-Vib Mtg 107C 117C 127C 137C 147C 157C 167C

6.4 Anti-vibration

spacer

107D 117D 127D 137D 147D 157D 167D

6.5 Washer 107E 117E 127E 137E 147E 157E 167E

6.6 Bolt 107F 117F 127F 137F 147F 157F 167F

7 Motor 108 118 128 138 148 158 168

8AssyScrews 109 119 129 139 149 159 169

8.1 Bolt 109A 119A 129A 139A 149A 159A 169A

8.2 Plate Washer 109B 119B 129B 139B 149B 159B 169B

8.3 Washer 109C 119C 129C 139C 149C 159C 169C

8.4 Washer 109D 119D 129D 139D 149D 159D 169D

8.5 Nut ------- 119E 129E 139E 149E 159E 169E

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PARTS DIAGRAM

ACCESSORIES

A full range of draught operated Louvre Shutters, Impeller Side Guards and

Fan Speed Regulators is available. Please contact your Clarke dealer for

details.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Clarke Fan

Clarke

Clarke air CAM200 Manuale di installazione e funzionamento

Clarke

Clarke Air CAM36 Manuale di istruzioni

Clarke

Clarke CFF18C100 Manuale di istruzioni

Clarke

Clarke CAM30110V Manuale di istruzioni

Clarke

Clarke CONTRACTOR CON500 Manuale di istruzioni

Clarke

Clarke air CHV18WF Manuale di istruzioni

Clarke

Clarke CAM500 Manuale di istruzioni

Clarke

Clarke CAM24R Manuale di istruzioni

Clarke

Clarke CDF20HV-P Manuale di installazione e funzionamento

Clarke

Clarke CAM20R Manuale di istruzioni

Clarke

Clarke CAM110 Manuale di istruzioni

Clarke

Clarke CAM200B Manuale di istruzioni

Clarke

Clarke AIR CAM6000 Manuale di istruzioni

Clarke

Clarke Contractor CON305 Manuale di istruzioni

Clarke

Clarke Air CDF18HV-B Manuale di installazione e funzionamento

Clarke

Clarke CPF18B Manuale di istruzioni

Clarke

Clarke CFF18B Manuale di istruzioni

Clarke

Clarke CDF20HV-B Manuale di installazione e funzionamento

Clarke

Clarke CSF2 Manuale utente

Clarke

Clarke CAM400 Manuale di istruzioni

Clarke

Clarke CBF20 Manuale di istruzioni

Clarke

Clarke air movers Manuale

Clarke

Clarke Air Series Manuale di istruzioni

Clarke

Clarke Air CBF20 Manuale di istruzioni

Manuali Fan popolari di altre marche

ELTA FANS

ELTA FANS H03VV-F Manuale utente

Hunter

Hunter 20714 Manuale di istruzioni

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuale utente

Hunter

Hunter Caraway Manuale di istruzioni

Panasonic

Panasonic FV-15NLFS1 Manuale utente

Kompernass

Kompernass KH 1150 Manuale utente

VES

VES FALA100/12V/TR Manuale utente

Vertiv

Vertiv Liebert DCD Manuale utente

Westinghouse

Westinghouse GFP Series Manuale utente

Venmar

Venmar KUBIX HRV PLUS Series Manuale utente

Maico

Maico ECR 31 Manuale utente

Sonnenkonig

Sonnenkonig Dinky Manuale utente

S&P

S&P ECOWATT HXBR Manuale utente

Wider

Wider IMP03369BH Manuale utente

Panasonic

Panasonic F-60DHN Manuale utente

Hinkley

Hinkley HIGHLAND Manuale utente

Broan

Broan 766BN Manuale utente

Premium

Premium PFS16022 Istruzioni per il montaggio