Clarke CAT171 Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Clarke Utensili elettrici

Clarke

Clarke CIR450B Manuale di installazione e funzionamento

Clarke

Clarke Metalworker CDP350V Manuale di installazione e funzionamento

Clarke

Clarke CAT115 Manuale di istruzioni

Clarke

Clarke CPR2 Manuale di installazione e funzionamento

Clarke

Clarke X-Pro CAT213 Manuale di installazione e funzionamento

Clarke

Clarke CMFT300QR Manuale di istruzioni

Clarke

Clarke Strong-Arm CSA30FPB Manuale di istruzioni

Clarke

Clarke CWS200 Manuale di istruzioni

Clarke

Clarke CAT21B Manuale di installazione e funzionamento

Clarke

Clarke Strong-Arm CSA20F Manuale di istruzioni

Clarke

Clarke CAT84 Guida alla risoluzione dei problemi

Clarke

Clarke CIR18LiC Manuale di installazione e funzionamento

Clarke

Clarke CPSB100 Manuale di istruzioni

Clarke

Clarke STRONG-ARM CS4BRK Manuale di istruzioni

Clarke

Clarke METALWORKER CDP401B Manuale di installazione e funzionamento

Clarke

Clarke Woodworker CBM1-C Manuale di installazione e funzionamento

Clarke

Clarke CHT141 Manuale utente

Clarke

Clarke STRONG-ARM CSA4B Manuale di istruzioni

Clarke

Clarke ECSS-1 Guida utente

Clarke

Clarke Woodworker CJS1-C Manuale di installazione e funzionamento

Clarke

Clarke Air CAT63 Manuale di installazione e funzionamento

Clarke

Clarke METALWORKER CMPS1 Manuale di istruzioni

Clarke

Clarke CIR18Li Manuale di installazione e funzionamento

Clarke

Clarke Strong-Arm CSA15F Manuale di installazione e funzionamento

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale

USER INSTRUCTIONS

GC0417

SANDING DRUM SET

MODEL NO: CAT171

PART NO: 3120188

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE 25-piece sanding drum set ideal for use

with electric hand drills, or hand operated air tools. (Refer to Specifications for

max. rotational speeds).

The set comprises 4 sets of abrasive sleeves for each drum size. Two sets

120grit, and 2 sets 80 grit.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

SPECIFICATION

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Model Number CAT171

Drum Sizes 12.7mm,19mm, 25mm, 38mm, 50mm

Maximum Speed (rpm) 12mm - 30000

19mm - 25000

25mm - 15000

38mm - 10000

50mm - 7500

Spindle Size 3mm (12 mm)

6mm (19-50 mm)

3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFE OPERATION & USE

SAFE PRACTICE

NEVER use a drum if the spindle is bent or damaged.

If used with a high speed air tool, always check that the spindle is not bent by

first fitting to an electric hand drill, gently switching on, and observing the drum

runs true. If in doubt, do not use.

Ensure the drum is capable of withstanding the rotational speed of the tool -

refer to ‘Specifications’.

ALWAYS ensure the jaws are tight when fitting to a power tool, and always

retest for tightness before every operation.

ALWAYS wear a dust mask and safety goggles, manufactured to current

European Standards, and a pair of industrial quality gloves whenever you use

this drum set with a power tool.

When using on metal surfaces, take all necessary fire precautions as sparks will

be created.

METHOD OF USE

The nut on the spindle of each drum has a LEFT HAND thread. Turn the nut

clockwise to move it away from the drum so that a slight gap appears, then

slide the abrasive sleeve fully over the drum.

Turn the spindle nut anticlockwise so that the drum is squeezed and expands

to grip the sleeve. Turn the nut until the sleeve is held firm but take care not to

overtighten.

Insert the drum spindle into your power tool to the FULL DEPTH of the spindle,

having ensured the complete assembly is in perfect condition and tighten the

chuck or collet jaws fully.

WARNING: COMPONENTS OF THIS DRUM SET ARE DESIGNED TO ROTATE

AT VERY HIGH SPEED. IT IS VITAL THAT THEY ARE TREATED WITH CARE AND

RESPECT. DO NOT USE IF DAMAGED.