Clarke CERT1225 Manuale utente

ENGINE REPAIR TABLE

Model No: CERT1225

Thank you for purchasing this Clarke Engine Repair table.

Please read this leaflet thoroughly in order to ensure it is assembled correctly, so that maximum benefit may be

gained from its use, and to ensure it provides you with long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please

keep your receipt therefore, as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the

purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Please note that the backing pad is not covered by this warranty.

Carefully unpack the components and, with assistance due to its weight, invert the table top as shown in Fig.1,

and place it on a sheet of cardboard or similar, to avoid damaging the paintwork.

ASSEMBLY

SPECIFICATIONS

Load Capacity .................................................................... 136kg (300Lbs)

Overall Dimensions ............................................................. 1225x730x1050mm

Drawer Size .......................................................................... 598x500x145mm

Drawer Load capacity ....................................................... 50kg (22lbs)

Oil Pan Capacity ................................................................ 16 litres

Net weight ........................................................................... 75kg (187lbs)

Attach the legs in the manner shown in Fig.2,

using two M6 nuts bolts, lock washers and flat

washers (supplied), per leg.

Do not fully tighten the nuts at this stage

Attach the shelf in the manner shown in Fig.3,

using the M6 nuts bolts, lock washers and flat

washers (supplied).

The shelf may be positioned, as desired.

Do not fully tighten the nuts at this stage

Attach the two wheel mounting brackets in the

manner shown in Fig.4, using the M6 nuts bolts

lock washers and flat washers supplied.

Bolt on the fixed wheels and casters, ensuring

both casters are at the same end of the table,

using the M8 nuts bolts and lock washers

supplied, tightening the nuts fully.

Finally, with assistance, turn the table so that it

rests on it’s wheels.

Rock the assembly gently to ensure it is

completely stable, then proceed to fully tighten

all nuts.

Slide the Oil Tray into place, on it’s runners.

Your Engine Repair Table is now ready for use.

For safety, you should always ensure the casters

are locked when the table is stationary.

Use on a firm level surface, and do not use on an

incline.

CLARKE International, Hemnall Street, Epping, Essex CM16 4LG. Tel: 01992 565300

CAUTION: DO NOT OVERLOAD THE TABLE

MAX LOAD - 136KG (300LBS)

Indice

Altri manuali Clarke Deposito attrezzi

Clarke

Clarke CWB1250 Manuale utente

Clarke

Clarke CWB1200E Manuale utente

Clarke

Clarke CWB1000 Manuale utente

Clarke

Clarke CPF13 Guida alla risoluzione dei problemi

Clarke

Clarke CWB1250 Manuale utente

Clarke

Clarke CHB1500 Manuale utente

Clarke

Clarke CWB1700P Manuale di istruzioni

Clarke

Clarke CWBR1B Manuale utente

Clarke

Clarke CWB300LS Manuale utente

Clarke

Clarke CWB1700P Manuale utente

Clarke

Clarke CWB1205P Manuale utente

Clarke

Clarke PC4 Manuale utente

Clarke

Clarke CWB80B Manuale utente

Clarke

Clarke CWB1201E Manuale utente

Clarke

Clarke CWB1630R Manuale utente

Clarke

Clarke CMUS3 Manuale utente

Clarke

Clarke CWB114 Manuale utente

Clarke

Clarke CMPW1 Manuale utente

Clarke

Clarke CWB2001P Manuale utente

Clarke

Clarke CWB300 Manuale utente

Clarke

Clarke CWB1200P Manuale utente

Clarke

Clarke CWB57 Manuale utente

Clarke

Clarke CWC38 Manuale utente

Clarke

Clarke Metalworker CBGS2 Manuale utente

Manuali Deposito attrezzi popolari di altre marche

Ryobi

Ryobi RWB03 Manuale utente

Husky

Husky H27CH5TR4BGK Manuale utente

Scheppach

Scheppach ts 2100 Manuale utente

Cornwell Tools

Cornwell Tools CTB360AKBK Manuale utente

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuale utente

Cassese

Cassese CS200 CART Manuale utente

Kendall Howard

Kendall Howard ESDW-9630-1000 Manuale utente

Lista

Lista Align Istruzioni per il montaggio

Workzone

Workzone 99609 Manuale utente

Stanley

Stanley STST83800-1 Manuale utente

Homak

Homak PROFESSIONAL Series Manuale del sistema

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manuale utente

Husky

Husky H5CH2R Manuale utente

BGS technic

BGS technic 4107 Manuale utente

Ryobi

Ryobi RWB02 Manuale utente

Husky

Husky H52CH6HDV3WHT Manuale utente

Sealey

Sealey PTB66004 Manuale utente

General International

General International Excalibur 40-100 Manuale elenco delle parti