Commell LS-372 Manuale utente
LS-372
3.5 inch miniboard
User’s Manual
Edition 1.0
2007/9/17
LS-372 User’s Manual
-1-
Copyright
Copyright 2007, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of
their respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT
LS-372 User’s Manual
-2-
Hardware:
LS-372 mini-board x 1
Cable Kit:
44-pin
44-pin
40-pin
ATA33 IDE Cable x1
SATA Cable x 1
YPbPr Cable x 1
SATA Power Cable x 1
1 to 3 power output cable
DC Power Cable x 1
PS/2 keyboard & mouse cable x 1
Composite Cable x 1
Audio Port Cable x 1
LS-372 User’s Manual
-3-
USB Cable x 1CPU Cooler x 1 COM Port Cable x 1
Printed Matters:
Driver CD x 1 (including User’s Manual)
LS-372 User’s Manual
-4-
Index
Chapter 1 <Introduction>...............................................................7
1.1 <Product Overview> .................................................................7
1.2 <Product Specification>............................................................8
1.3 <Mechanical Drawing>...........................................................10
1.4 <Block Diagram>....................................................................11
Chapter 2 <Hardware Setup>....................................................13
2.1 <Connector Location>.............................................................13
2.2 <Jumper Location & Reference>............................................14
2.3 <Connector Reference>...........................................................15
2.3.1 <Internal Connectors> .........................................................15
2.3.2 <External Connectors> ........................................................16
2.4 <CPU and Memory Setup>.....................................................17
2.4.1 <CPU Setup>.....................................................................17
2.5 <CMOS Setup>.......................................................................18
2.6 <Enhanced IDE Interface>......................................................19
2.7 <Serial ATA Interface>............................................................20
2.8 <Ethernet Interface>................................................................21
2.9 <Onboard Display Interface>..................................................22
2.10.1 <Analog Display>.............................................................22
2.10.2 <Digital Display>..............................................................23
2.10.3 <HDTV Interface> ............................................................27
2.11 <Integrated Audio Interface> ................................................28
2.12 <GPIO Interface>..................................................................30
2.13 <Power Supply>....................................................................31
2.13.1 <Power Input>..................................................................31
2.13.2 <Power Output>................................................................32
2.14 <Switch and Indicator>.........................................................33
Chapter 3 <System Setup>.........................................................34
3.1 <Audio Configuration>...........................................................34
LS-372 User’s Manual
-5-
4. Select the sound mode to meet your speaker system.......................................34
3.2 <Video Memory Setup> ..........................................................35
3.3 <Display Properties Setting>...................................................37
Chapter 4 <BIOS Setup>..............................................................39
Appendix A <I/O Port Pin Assignment>............................41
A.1 <IDE Port>..............................................................................41
A.2 <Serial ATA Port>...................................................................42
A.3 <IrDA Port>............................................................................42
A.4 <Serial Port 1>........................................................................43
A.5 <VGA Port>............................................................................43
A.6 <LAN Port>............................................................................44
A.7 < USB Interface >...................................................................44
Appendix B <Flash BIOS>...........................................................45
B.1 <Flash Tool> ...........................................................................45
B.2 <Flash BIOS Procedure>........................................................45
Appendix C <System Resources>........................................46
Appendix D <Programming GPIO’s>..................................50
Appendix E <Programming Watchdog Timer >...........51
Appendix F <How to setting COM2 & IrDA>..................52
Contact Information.........................................................................53
LS-372 User’s Manual
-6-
(This page is left for blank)
LS-372 User’s Manual
-7-
Chapter 1 <Introduction>
1.1 <Product Overview>
LS-372 is the new generation of the 3.5 inch miniboard, with supporting Intel Core 2 Duo
socket-P processors for 533/800MHz front side bus, Intel GME965 and ICH8M chipset,
integrated GMAX3100 graphics, DDR2 memory, REALTEK High Definition Audio, Serial
ATA and one Intel Gigabit LAN.
Intel Merom dual core Processor
The board supports Intel Core 2 Duo socket-P processors with 533/800MHz front side
bus, 4MB L2 cache, to provide more powerful performance than before.
New features for Intel GME965 chipset
The board integrates Intel GME965 and ICH8M chipset, to provide new generation of
the mobile solution, supports Intel GMA X3100 graphics, DDR2 533/667Mhz memory,
built-in high speed mass storage interface of serial ATA, High Definition Audio .
All in One multimedia solution
Based on Intel GME965 and ICH8M chipset, the board provides high performance
onboard graphics,18/24-bit Single/dual channel LVDS interface, HDTV and High
Definition Audio, to meet the very requirement of the multimedia application.
Flexible Extension Interface
The board provides Compact Flash Type II slot, one mini-PCI slot.
LS-372 User’s Manual
-8-
1.2 <Product Specification>
General Specification
Form Factor 3.5 inch miniboard
CPU Support Intel Core 2 Duo Mobile Processor
Package type: Micro-FCPGA478 (Socket-P)
Front side bus: 533/800 MHz
Memory One DDRII 533/667MHz DIMM up to 2GB with single channel
Interleaved mode
Chipset Intel GME965 & ICH8M (82801HBM)
Real Time Clock Chipset integrated RTC with onboard lithium battery
Watchdog Timer Generates a system reset with internal timer for 1min/s ~ 255min/s
Power Management ACPI 1.0 compliant, supports power saving mode
PCI Enhanced IDE One 44-pin UltraATA33 IDE interface supports up to 2 ATAPI devices
Serial ATA Interface 1 x serial ATAII interface with 300MB/s transfer rate
VGA Interface Intel integrated extreme GMA X3100 (Graphic Media Accelerator)
Technology
Video Memory Up to 384MB shared with system memory
LVDS interface Onboard 24-bit dual channel LVDS connector with +3.3V/+5V/+12V
Supply
DVI Interface Onboard Chrontel CH7307C DVI transmitter
Support rear HDMI Connect for DVI Interface
Audio Interface Intel integrated ICH8M with Realtek ALC888 HD Audio
LAN Interface One Intel 82573L Gigabit LAN
Solid State Disk IDE supports 44-pin DiskOnModule
One Compact Flash Type II
GPIO interface Onboard programmable 8-bit Digital I/O interface
Extended Interface One Mini PCI socket to support Mini PCI Type IIIA
Internal I/O Port 2x COM, 1x GPIO port,
4xUSBports,1xIrDA,1xIDE,1XLVDS,
1x LCD inverter connector, 1x PS/2 Keyboard/Mouse Port
1x Front panel Audio connector and
1 x CDIN connector
External I/O Port 1 x LAN port, 1 x VGA port, 1x HDTV ,1 x HDMI connect
2 x USB2.0 ports, 1 x Audio Output, 1 x SPDIF connector
Power Requirement 12V DC Input
Dimension 146mm x 101mm
Temperature Operating within 0~60 centigrade
Storage within –20~85 centigrade
Indice
Altri manuali Commell Scheda madre
Commell
Commell LV-668 Manuale utente
Commell
Commell LV-67I Manuale utente
Commell
Commell LE-5Q0 series Manuale utente
Commell
Commell LE-37G Manuale utente
Commell
Commell P3WMA Series Manuale utente
Commell
Commell FE-97G Manuale utente
Commell
Commell LE-37R Manuale utente
Commell
Commell LV-67S Manuale utente
Commell
Commell LP-176 Manuale utente
Commell
Commell LP-150 Manuale utente
Commell
Commell LE-37N7 Manuale utente
Commell
Commell LV-67D Manuale utente
Commell
Commell LS-371 Manuale utente
Commell
Commell LV-67TK7 Manuale utente
Commell
Commell HS-873P Manuale utente
Commell
Commell P4LA Manuale utente
Commell
Commell LS-371E Manuale utente
Commell
Commell LE-575 Manuale utente
Commell
Commell PMCA Manuale utente
Commell
Commell LP-175 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
Biostar
Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione
