CommScope NG4access ODF Platform Value-Added Module Manuale utente

300100105359 Rev D Page 1

Installation

Instructions

Installing a Single Height VAM

Install the module from the rear of the universal chassis (“left” module on left side, “right”

module on right side). Use the following procedure, referring to the illustration below.

1. Pull out the access tray handle.

2. Snap the module down in locations 1, 2, and 3, as shown in Figure 1, then squeeze the

module and access tray crossbar at location 4 and 5, as shown, until the module snaps in.

3. Slide in the access tray handle to close the access tray.

4. Connect cables to the module front ports and route the cables on the front of the frame per

instructions on laminated cards hanging on front of the frame (TECP-90-705).

Figure 1. Installing a Single Height VAM

Installing a Double or Triple Height VAM

Install the module from the rear of the universal chassis (“left” module on left side, “right”

module on right side). Use the following procedure, referring to the illustration below.

1. Identify the two or three trays where the double or triple high VAM is to be installed.

2. Remove the top one or two trays (see instruction video: https://youtu.be/xRx4xUo2fkA).

25239-A

ACCESS

TRAY

HANDLE

TECP-90-720 •Rev D •December 2019

NG4access ODF Platform Value-Added Module (VAM)

All Front Access

TECP-90-720 • Rev D • December 2019

Page 2 Technical Support or Product Information

http://www.commscope.com/SupportCenter

3. Install clips between access tray doors referring to Figure 2.

Figure 2. Installing a Clip on an Access Tray Door

4. Snap the module down in locations 1, 2, and 3, as shown in Figure 3, then squeeze the

module and access tray crossbar at location 4 and 5, as shown, until the module snaps in.

5. Slide in the access tray handle to close the access tray.

6. Connect cables to the module front ports and route the cables on the front of the frame per

instructions on laminated cards hanging on front of the frame (TECP-90-705).

Figure 3. Installing a Double or Triple Height VAM

25614-A

ACCESS

TRAY

HANDLE

PRESS CLIP ON ACCESS

TRAY DOOR IN

ORIENTATION SHOWN

25612-A

ACCESS

TRAY

HANDLE

Altri manuali per NG4access ODF Platform Value-Added Module

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CommScope Unità di controllo

CommScope

CommScope CMOD Manuale utente

CommScope

CommScope Propel PPL-1U-HD-FX Manuale utente

CommScope

CommScope Ruckus I100 Manuale utente

CommScope

CommScope SYSTIMAX MGS Series Manuale utente

CommScope

CommScope ION-M7HP EU Manuale utente

CommScope

CommScope ATSBT-4G Series Manuale utente

CommScope

CommScope Teletilt ATC200-LITE-USB Manuale utente

CommScope

CommScope ION-U H 17P2 Manuale utente

CommScope

CommScope SYSTIMAX 360 InstaPATCH 3603M UHD Manuale utente

CommScope

CommScope FTTX Solutions Rapid Flexible Fiber Box Manuale utente

CommScope

CommScope SYSTIMAX 360 iPatch 360-iP-1100-E-GS3-1U-24 Manuale utente

CommScope

CommScope FlexWave Host Unit II Manuale elenco delle parti

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente