COMPRO V600 - START UP GUIDE Manuale utente
VideoMate V600
Analog Standalone TV Box
Start Up Guide
Compro Technology, Inc.
www.comprousa.com
Copyright © 2001-2008. Compro Technology, Inc. No part of this
document may be copied or reproduced in any form or by any means
without the prior written consent of Compro Technology, Inc.
Compro, VideoMate, Poladyne, Play with Power, and the Compro
logo are trademarks of Compro Technology, Inc. Other names and
marks are trademarks of their respective owners.
COMPRO makes no warranties with respect to this documentation
and disclaims any implied warranties of merchantability, quality, or
fitness for any particular purpose. The information in this document is
subject to change without notice. COMPRO reserves the right to
make revisions to this publication without obligation to notify any
person or entity of any such changes.
Compro Technology, Inc.
Tel. +886 2 2918 0169, Fax +886 2 2915 2389
4/F, No.12, Alley 6, Lane 45, Pao Shin Road
Hsintein City, Taipei, Taiwan.
www.comprousa.com
1
Table of Contents
About This Guide .............................................................. 2
VideoMate V600 TV Box Contents ................................... 3
VideoMate V600 TV Box Hardware Guide........................ 4
Remote Control Key Definition and Use ........................... 5
VideoMate V600 TV Box Using Guide .............................. 6
Troubleshooting............................................................... 12
2
About This Guide
This guide provides you the information on how to install and use your
VideoMate V600 Analog Standalone TV Box.
VideoMate V600 Analog Standalone TV Box lets you watch TV with your
computer monitor. V600 TV Box also provides the input base stand to allow
you to connect other video devices (i.e. DVD Player, XBOX, PS2, PS 3, Wii or
other game console). The maximum resolution are 1600x1200 and 1680x1050
to gives you the crystal clear pictures. It also supports 4:3, 5:4, 16:9, and 16:10
screen ratio for all kinds of monitors. With the Remote Controller that included
with V600 TV Box will greatly increase the value of the computer monitor which
also saves you from buying another TV set.
SYSTEM REQUIREMENTS
zMonitor (CRT or LCD) contains D-sub Connector and supports 640*480
resolution or above.
zSpeakers with stereo jack.
Warning
It is normal for VideoMate V600 TV Box become warm when it is being used.
Please place the TV Box at a place where the air flows.
VideoMate V600 TV Box will only need a computer monitor to work; It does not
require to connect to computer nor turn on the computer to work properly.
Please do not use other adaptor except the one included in the package to
prevent damaging V600. Damaged V600 by using wrong adaptor will not be
cover from the warranty.
3
VideoMate V600 TV Box Contents
VideoMate V600
TV Box
Power Adaptor
Start Up Guide Remote Control
(with 2 AAA batteries)
Base Holder
D-sub CableAudio Cable
4
VideoMate V600 TV Box Hardware Guide
TV Cable/Antenna
Input
Line Out to Speaker
Connect to Monitor
(15 pin D-sub output)
12V Power Jack
Connect to Computer
(15 pin D-sub input)
Line In from PC
Power SW
(Hold 2 sec.)
Component Input (Y/Cb/Cr)
Ear Phone
Jack
15 pin D-sub
Channel +
Channel –
Menu
Volume +
Volume –
Composite (L&R Audio, Video) S-Video
5
Remote Control Key Definition and Use
POWER Power On/Off
MUTE Mute
DISPLAY Display OSD Info.
TV/PC Switch TV/PC Mode
SOURCE Video Source Switch
SLEEP Sleep Mode
PIP Picture In Picture
PIP AUDIO Switch audio between TV
and PC
RES Switch Resolution
CH.SURF Channel Surfing
SET FAV. Set Favorite CH List
FAV UP Favorite CH List Up
FAV DOWN Favorite CH List Down
MENU Display Menu
EXIT Exit Menu
UP Direction Up (CH +)
DOWN Direction Down (CH -)
LEFT Direction Left (Volume -)
RIGHT Direction Right (Volume +)
OK Confirm
VOL Volume Control
CHAN Channel Switch
SAP Stereo/SAP/Mono
0-9 Number Keys
100 Number Key
Return to last channel
6
VideoMate V600 TV Box Using Guide
Using at the first time
Please refer to the above for correct setup to use V600 TV Box. After you have
connected the power adaptor, you will see orange light shining out from the
side. Press the power button at the top will turn on the TV Box and you will see
orange light become blue light. Please use Auto Scan to remove channels
without signal. Now you may enjoy the TV Show.
If you have connect V600 TV box to your computer’s video card, press the
power button on the TV box or the power button on the remote control will
switch between TV and PC signal. You may also press “TV/PC” button on the
remote control to achieve the same result.
Order of the Sources: TV ÆComposite ÆS-Video ÆComponent ÆTV
VideoMate V600 TV Box supports 9 resolutions from below. Each resolution
Supports 60Hz and 75Hz. The default setting is 1024*768 @ 60Hz.
Resolution 1 -> 640*480 (4:3) Resolution 6 -> 1400*1050 (4:3)
Resolution 2 -> 800*600 (4:3) Resolution 7 -> 1440*900 (16:10)
Resolution 3 -> 1024*768 (4:3) Resolution 8 -> 1600*1200 (4:3)
Resolution 4 -> 1280*720 (16:9) Resolution 9 -> 1680*1050 (16:10)
Resolution 5 -> 1280*1024 (5:4)
To change resolution, please open up menu and select the resolution you want.
Refer to later instruction for more detail. “RES” button from the remote
controller can also switch the resolution.
If using PIP feature, the refresh rates in Windows support resolutions below:
Su
pp
ort Refresh Rate
Resolution
60 Hz 70 Hz 72 Hz 75 Hz
640 x 480 Yes - Yes Yes
800 x 600 Yes - Yes Yes
1024 x 768 Yes Yes Yes Yes
1152 x 864 Yes Yes - Yes
1280 x 1024 Yes Yes Yes Yes
1280 x 720 Yes Yes Yes Yes
1440 x 900 Yes Yes Yes Yes
1400 x 1050 Yes Yes Yes Yes
1600 x 1200 Yes - Yes Yes
1680 x 1050 Yes Yes Yes Yes
7
OSD Menu Guide
Menu button will open up OSD Menu, please use the direction key to navigate.
(Picture)
(TV)
(Monitor)
(OSD)
(Sound)
Brightness Adjust the brightness (0~100) Default : 50
Contrast Adjust the Contrast (0~100) Default : 50
Saturation Adjust the Saturation (0~100) Default : 50
Sharpness Adjust the Sharpness (0~15) Default : 0
Hue Adjust the Hue ( 0~100) Default : 50
Y/C Sep. Mode Choose between 2D/3D mode Default : 3D Mode
Presets 3 modes of picture settings (Standard/Game/Cinema)
(Picture)
(TV)
(Monitor)
(OSD)
(Sound)
Input Signal Select Air or Cable for TV input signal type. Default is Air
Channel
Rename Set a name for specific channel. (5 letter/numbers)
Fine tune Fine tune frequency if TV is unclear. (0~100) default is 50
Auto Scan Recommend to use Auto Scan for the first time. (NO/YES)
Channel Swap Swap the channel numbers to your preference. (NO/YES)
CH Add/Erase Add or Erase channel.
Channel Video
System
Change video standard for current channel.
Default by different countries
(Picture)
(TV)
(Monitor)
(OSD)
(Sound)
640*480 800*600 1024*768 (default) 1280*720
1280*1024 1400*1050 1440*900 1600*1200
Resolution
1680*1050
Refresh Rate 60Hz (default) 75Hz
Noise Reduction Adjust level of noise reduction. (0~8) Default is 4
Display Type LCD (default) CRT PDP
Input Source TV Composite SV (S-Video) YCbCr (Component) PC
8
Channel Swap
To swap the channel numbers, please select Channel Swap from the menu
then select yes, and it will show as a sub menu. Once you have entered this
menu, you will see a list of channels. You may browse with the direction keys;
Up and Down are going through the list while Left and Right are changing
pages of the list. Select the channel number that you wish to swap and press
OK, and then enter the number of the channel that you wish to switch.
To reset to the original channel numbers, please rescan the channel table
again by selecting Auto Scan in the menu.
My Favorite Channel List
My Favorite Channel List can store up to 10 channels that you watch the most
and browse with “FAV UP” and “FAV DOWN” keys on the remote controller.
To add channels to the favorite list, please turn to the channel you wish to add
and press “SET FAV” on the remote controller. Press “OK” on the selected
position.
(Picture)
(TV)
(Monitor)
(OSD)
(Sound)
OSD Position Press OK key, use direction keys to move OSD position
OSDTransparency 1 2 3 4
Language Select your language
Reset All Settings NO/YES (1 Cancel / 2 Reset All Settings)
Information VideoMate V600 Version information
Country/Region Select your country or region
(Picture)
(TV)
(Monitor)
(OSD)
(Sound)
Volume Adjust volume (0-50)
Treble Adjust Treble volume (0-15)
Bass Adjust Bass volume (0-15)
Loudness ON (enlarge the amplifier) / OFF (original signal)
Reset Reset sound settings (NO/YES)
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali COMPRO Decoder
COMPRO
COMPRO V200 - START UP GUIDE Manuale utente
COMPRO
COMPRO V550 - START UP GUIDE Manuale utente
COMPRO
COMPRO DVB-U2000 - START UP GUIDE Manuale utente
COMPRO
COMPRO DVB-U2200 - START UP GUIDE Manuale utente
COMPRO
COMPRO V300 - START UP GUIDE Manuale utente
COMPRO
COMPRO W800F - START UP GUIDE Manuale utente
COMPRO
COMPRO U3 - START UP GUIDE Manuale utente
COMPRO
COMPRO V150 - START UP GUIDE Manuale utente
COMPRO
COMPRO W700F - START UP GUIDE Manuale utente
COMPRO
COMPRO V220 - START UP GUIDE Manuale utente
