Concept Pro AIR3016 Manuale utente

AIR30 Range

Weatherproof Colour/Mono IR Camera

USER MANUAL

TECHNOLOGY

ADVANCED INFRARED

ALLEN KEY

1. This installation should be made by a qualified service person and should abide to all local

codes.

2. In order to prevent electronic shock and/or destroy waterproof seals, do not loosen any

screws on the camera body.

3. Adjust the sunshield cover to avoid exposure of direct sunlight on the lens.

4. Do not touch the front glass directly. If necessary, use a soft cloth moistened with alcohol to

wipe off dust or debris.

5. Avoid installation on a surface subjected to frequent vibration or shocks.

6. Do not operate the camera beyond its temperature range or power source ratings.

7. Should any damage or suspected damage occur, shutdown the power source, unplug and

contact your service provider.

8. Do not install the camera under unstable lighting conditions. Severe lighting change or

flicker can cause the camera to work improperly.

9. Never use the camera close to a gas or oil leak.

10. Do not disassemble the camera.

11. Do not drop the camera or subject the unit to physical shocks.Never keep the camera face

to strong light directly, this can damage the CCD.

12. Ensure all removable covers are replaced to protect the inner components.

13. Do not install near devices which emit a strong electro-magnetic field.

14. Use a dry or damp cloth only for cleaning.

PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY

INVALIDATE THE WARRANTY OR CAUSE SERIOUS INJURY.

Remark: Changes or modifications not expressly approved by the manufacturer can

cause the camera to be damaged and become inoperable. This may invalidate the

user warranty.

CAUTION

PACKING CONTENTS

ALLEN KEY

PLASTIC-WALL PLUG

SCREW

LENS ADJUSTMENT

COVER SCREW

The Concept Pro AIR30 is a weatherproof IR camera, suitable for

monitoring areas in hostile conditions and in low light.

USER

MANUAL

MOUNTING

DRAWING PAPER

DC CONNECTOR

1 2

4 5

1 Fixing Bolt for Sunvisor

2. Photo Sensor

3. IR LED

4. Sunvisor

5 Mounting Bracket

6 Tri- Axis Points

7 12V DC Connector

8 Video Out Connector

9 External Lens Adjustment

10 Service Video Output

SERVICE VIDEO OUT

CABLE

(AIR3016 / AIR3026 ONLY)

OSD CABLE

(AIR3026HG ONLY)

LENS ADJUSTMENT

TOOL

ENT

USER MANUAL

1. This installation should be made by a qualified service person and should abide to all local

codes.

2. In order to prevent electronic shock and/or destroy waterproof seals, do not loosen any

screws on the camera body.

3. Adjust the sunshield cover to avoid exposure of direct sunlight on the lens.

4. Do not touch the front glass directly. If necessary, use a soft cloth moistened with alcohol to

wipe off dust or debris.

5. Avoid installation on a surface subjected to frequent vibration or shocks.

6. Do not operate the camera beyond its temperature range or power source ratings.

7. Should any damage or suspected damage occur, shutdown the power source, unplug and

contact your service provider.

8. Do not install the camera under unstable lighting conditions. Severe lighting change or

flicker can cause the camera to work improperly.

9. Never use the camera close to a gas or oil leak.

10. Do not disassemble the camera.

11. Do not drop the camera or subject the unit to physical shocks.Never keep the camera face

to strong light directly, this can damage the CCD.

12. Ensure all removable covers are replaced to protect the inner components.

13. Do not install near devices which emit a strong electro-magnetic field.

14. Use a dry or damp cloth only for cleaning.

PLEASE FOLLOW THE ABOVE CAUTIONS – FAILURE TO DO SO MAY

INVALIDATE THE WARRANTY OR CAUSE SERIOUS INJURY.

Important: Ensure all cautionary procedures are observed during installation.

It is recommended the camera is tested during the most demanding environmental conditions

such as low light or bright sunlight to ensure continuity of effective CCTV monitoring. You may

find the use of an ND filter helpful.

Use the supplied drill mounting

template to mark the spacing

for drilling.

Following drilling, securely

attach the bracket and

camera to the wall.

Remove the camera unit carefully from the box, reserving the accessory contents in a

safe place.

FIXING TO A WALL

DRAWING TEMPLATE

POSITIONING Point the Camera towards the intended area to be monitored.

INSTALLATION

CONNECTION

Connect the video out port to your video cable

running to the monitoring recorder.

Check the power supply is of the correct level

and connect your power supply into the power

port on the Camera.

View the picture on a monitoring device to

check the power and video connection is

working properly.

PSU

Troubleshooting

Ensure all power and cable connections are correct with the Camera, DVR and Test monitor

or Telemetry devices if used.

Power Voltage Check - Remove the OSD cover to see if the green correct power LED is lit. If

the red LED is lit the power voltage is too high. If the yellow LED is lit the power voltage is

not high enough. If there are no LEDs lit there is no power getting to the camera

If all power and cable connections are correct and the camera picture can not be produced or

configured then contact your supplier for technical support.

Point the Camera towards the intended area to be monitored.

2 3

Troubleshooting

Ensure all power and cable connections are correct with the Camera, DVR and Test monitor

or Telemetry devices if used.

Power Voltage Check - Remove the OSD cover to see if the green correct power LED is lit. If

the red LED is lit the power voltage is too high. If the yellow LED is lit the power voltage is

not high enough. If there are no LEDs lit there is no power getting to the camera

If all power and cable connections are correct and the camera picture can not be produced or

configured then contact your supplier for technical support.

EXTERNAL LENS ADJUSTMENT

The power indicator LEDs display the power supply being fed into the camera and whether it

is too high, low or correct.

1. "PO": Red LED - Voltage is too high

2. "PN": Green LED - Voltage is correct

3. "PL": Yellow LED - Voltage is too low

4. Extra video out for testing monitor - Attach your Video test monitor with the service video

cable enclosed in your camera box. The camera footage will appear on your test monitor

and zoom/focus adjustments can be carried out as the installation requires.

The Service Video Out panel contains a power indicator and test monitor connection for

ease of adjusting the camera settings during installation.

PO PN

VIDEO

1 2 3

SERVICE VIDEO OUTPUT CABLE

AIR3016 / AIR3026

SEE OVERLEAF FOR AIR3026HG ON SCREEN DISPLAY

TEST MONITOR

A B

1 Open the lens adjuster cover and

adjust focus and zoom. Loose the

screw on the lens adjuster cover.

2. Lens Adjustment Tool

3 Focus and Zoom Adjustments

Zoom

Turn clockwise to zoom wide

anti-clockwise to zoom narrow

Focus

Turn clockwise to focus far

Anti-clockwise to focus near

SERVICE VIDEO OUTPUT (AIR3016 / 3026 MODELS ONLY)

85mm (3.35”)

92mm (3.62”)

202mm (7.95”)

130mm (5.12”)

118mm (4.65”)

DC12V IN

VIDEO OUT

70mm (2.76”)

56mm (2.20”)

3 - 5mm (0.20”)

The power indicator LEDs display the power supply being fed into the camera and whether it

is too high, low or correct.

1. "PO": Red LED - Voltage is too high

2. "PN": Green LED - Voltage is correct

3. "PL": Yellow LED - Voltage is too low

4. Extra video out for testing monitor - Attach your Video test monitor with the service video

cable enclosed in your camera box. The camera footage will appear on your test monitor

and zoom/focus adjustments can be carried out as the installation requires.

DIMENSIONS

ON SCREEN DISPLAY (OSD) (AIR3026HG MODEL ONLY)

The power indicator LEDs display the power supply being fed into the camera and whether it

is too high, low or correct.

1. "PO": Red LED - Voltage is too high

2. "PN": Green LED - Voltage is correct

3. "PL": Yellow LED - Voltage is too low

4. Extra video out and OSD control connector - Attach your Video test monitor with the

service video cable enclosed in your camera box. The camera footage will appear on your

test monitor and zoom/focus adjustments can be carried out as the installation requires.

1) Press “U” to navigate upwards

2) Press “D” to navigate downwards

3) Press “L” to navigate left

4) Press “R” to navigate right

5) Press “ENT” to open menu/sub-menu

The Service Video Out panel contains a power indicator and test monitor connection for

ease of adjusting the camera settings during installation.

PO PN

VIDEO

1 2 3

TEST MONITOR

OSD OUTPUT CABLE

ENT

OSD Controller

ENT

AIR3026HG

The power indicator LEDs display the power supply being fed into the camera and whether it

is too high, low or correct.

1. "PO": Red LED - Voltage is too high

2. "PN": Green LED - Voltage is correct

3. "PL": Yellow LED - Voltage is too low

4. Extra video out and OSD control connector - Attach your Video test monitor with the

service video cable enclosed in your camera box. The camera footage will appear on your

test monitor and zoom/focus adjustments can be carried out as the installation requires.

LENS MANUAL

LENS

SHUTTER

BRIGHTNESS

AGC

SENSE UP

BLC

D-WDR

RETURN

AUTO, FLK, 1/100000 ~ X256

0 - 100

OFF / LOW / MIDDLE / HIGH

OFF

AUTO X2 ~ X256

OFF

BLC GAIN LOW / MIDDLE / HIGH

LEFT / RIGHT 0~7

WIDTH

TOP / BOTTOM

HEIGHT

RETURN

HSBLC LEVEL 0~8

LEFT / RIGHT

WIDTH

TOP / BOTTOM

HEIGHT

RETURN

OFF / INDOOR / OUTDOOR

EXPOSURE

WHITE BALANCE

AWB

AWC SET

MANUAL

INDOOR

OUTDOOR

ATW

BLUE

RED

RETURN

DAY NIGHT

AUTO DELAY

S-LEVEL

E-LEVEL

RETURN

EXT

B/W BURST

COLOUR

RETURN

0 - 63

0- 100

0 - 100

OFF / ON

OFF

ON LEVEL 0-100

RETURN

3DNR

CAM TITLE OFF / ON

D-EFFECT FREEZE OFF / ON

MIRROR OFF / MIRROR / V-FLIP / ROTATE

D-ZOOM OFF

ON D-ZOOM X1.0 ~ 32.0

PAN

TILT

RETURN

GAMMA

NEG.IMAGE

RETURN

PRIVACY OFF

ON AREA SELECT AREA 1 - AREA 8

AREA DISPLAY ON / OFF

LEFT/RIGHT

WIDTH

TOP/BOTTOM

HEIGHT

COLOR

RETURN

LANGUAGE ENGLISH/JAPANESE/SIMPLIFIED CHINESE/

TRADITIONAL CHINESE

RETURN

SPECIAL

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Concept Pro Telecamera di sicurezza

Concept Pro

Concept Pro VCP7238-AHD Manuale utente

Concept Pro

Concept Pro CBP360-IP12M Manuale utente

Concept Pro

Concept Pro CP-HSD10-IP Manuale utente

Concept Pro

Concept Pro CBP4304 Manuale utente

Concept Pro

Concept Pro CVP9324DNIR-HDA-3MP Manuale utente

Concept Pro

Concept Pro CVP5325DNIR-AHD2M/2.8 Manuale utente

Concept Pro

Concept Pro VCP553 Manuale utente

Concept Pro

Concept Pro AIR2024-IP2M/2.8 Manuale utente

Concept Pro

Concept Pro CVP9324-AHD Manuale utente

Concept Pro

Concept Pro VCP7236 Manuale utente

Concept Pro

Concept Pro AIR8012-IP3M-Z Manuale utente

Concept Pro

Concept Pro CVP9328DNIR-IP4M Manuale utente

Concept Pro

Concept Pro AHD CP-HSD10-AHD Manuale utente

Concept Pro

Concept Pro CVP9328DNIR-IP2M-Z Manuale utente

Concept Pro

Concept Pro VHSDIR-680EXT-IP Manuale utente

Concept Pro

Concept Pro CBP360-HD Manuale utente

Concept Pro

Concept Pro CVP9324DN-IP4M Manuale utente

Concept Pro

Concept Pro VHSDIR-812EXT-IP3M Manuale utente

Concept Pro

Concept Pro AHD Series Manuale utente

Concept Pro

Concept Pro CVP5325DNIR-IP2M/2.8 Manuale utente

Concept Pro

Concept Pro CP-HSD20-IP Manuale utente

Concept Pro

Concept Pro AIR3526-AHD2M Manuale utente

Concept Pro

Concept Pro CBP6314DNIR Manuale utente

Concept Pro

Concept Pro CPL-MVIR-IP2M/2.8 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente