Connective Peripherals EasyScopeIII Manuale utente

Connective Peripherals Pte Ltd

178 Paya Lebar Road, #07-03 Singapore 409030

Tel.: +65 67430980 Fax: +65 68416071

E-Mail (Support): support@connectiveperipherals.com Web: www.connectiveperipherals.com/products

Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced

in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are

supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Connective

Peripherals Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory

rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the

failure of the product might reasonably be expected to result in personal injury. This document provides preliminary informat ion that

may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of

this document. Connective Peripherals Pte Ltd, 178 Paya Lebar Road, #07-03 Singapore 409030. Registered Number: 201617872E

EasyScopeIII for DS60M10

User Guide

Document Reference No.: CP_000037

Version 1.3

Issue Date: 2019-03-22

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

Table of Contents

1Introduction.................................................................... 5

2Installing EasyScopeIII .................................................. 6

2.1 Windows ................................................................................... 6

2.1.1 Installing the software ............................................................................... 6

2.1.2 Installing the USB Driver ............................................................................ 8

2.2 Mac OS...................................................................................... 9

3Scope Mode ................................................................... 12

3.1 Overview................................................................................. 12

3.2 Features.................................................................................. 12

3.3 Front Panel Functions ............................................................. 13

3.3.1 Run/Stop and Single Buttons .....................................................................13

3.3.2 Time Base Settings ...................................................................................14

3.3.3 Volts/div Settings .....................................................................................15

3.3.4 GND .......................................................................................................15

3.3.5 Trigger Settings .......................................................................................17

3.3.6 AC/DC Coupling .......................................................................................19

3.3.7 Invert .....................................................................................................20

3.3.8 XY ..........................................................................................................20

3.3.9 Slider......................................................................................................21

3.3.10 FFT Display..............................................................................................21

3.3.11 Meter A and Meter B .................................................................................24

3.3.12 Cursors ...................................................................................................25

3.3.13 Upsampling .............................................................................................27

3.3.14 Auto Set..................................................................................................29

3.4 Menu Functions....................................................................... 29

3.4.1 File Menu ................................................................................................29

3.4.2 Screen Menu............................................................................................29

3.4.3 Tools Menu ..............................................................................................32

3.4.4 Display Options ........................................................................................34

3.4.5 Help Menu ...............................................................................................34

3.5 Error Messages ....................................................................... 35

3.5.1 Please Connect DS60M10 HS Scope............................................................35

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

3.5.2 For XY Mode, both Channel A and B should be on .........................................35

3.5.3 Please run scope first................................................................................35

3.5.4 Cannot start scope ...................................................................................35

4Logger Mode ................................................................. 36

4.1 Overview................................................................................. 36

4.2 Features.................................................................................. 37

4.3 Front Panel Functions ............................................................. 37

4.3.1 Start Button.............................................................................................37

4.3.2 Stop Button .............................................................................................38

4.3.3 Sample Interval .......................................................................................38

4.3.4 Channel Enable buttons.............................................................................39

4.3.5 Slide bar .................................................................................................40

4.3.6 Scale Panel ..............................................................................................40

4.4 Toolbar Buttons ...................................................................... 40

4.4.1 Open Chart..............................................................................................40

4.4.2 Save Chart ..............................................................................................40

4.4.3 Print Chart Area .......................................................................................40

4.4.4 Copy Chart to Clipboard ............................................................................41

4.4.5 Zoom In/Out............................................................................................41

4.4.6 Cursors ...................................................................................................41

4.4.7 TestMode Waveform .................................................................................44

4.4.8 Memo Window .........................................................................................44

4.4.9 Info Window ............................................................................................44

4.4.10 X-Control Window.....................................................................................44

4.4.11 Y-Control Window.....................................................................................44

4.5 Sub Panel Functions................................................................ 45

4.5.1 Memo Window .........................................................................................45

4.5.2 Info Window ............................................................................................46

4.5.3 X-Control Window.....................................................................................46

4.5.4 Y-Control Window.....................................................................................47

4.6 Menu Functions....................................................................... 48

4.6.1 File Menu ................................................................................................48

4.6.2 Run Menu................................................................................................49

4.6.3 Edit Menu ................................................................................................49

4.6.4 View Menu...............................................................................................53

4.6.5 Window Menu ..........................................................................................55

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

4.6.6 Help Menu ...............................................................................................55

4.6.7 Mode Menu ..............................................................................................55

4.7 Technical Support ................................................................... 56

5Contact Information...................................................... 57

Appendix A - List of Figures & Tables................................. 58

List of Figures ................................................................................. 58

List of Tables ................................................................................... 59

Appendix B - Revision History............................................ 60

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

1Introduction

EasyScopeIII is an easy to use but powerful Digital Sampling Oscilloscope application program for the

USB Instruments DS60M10.

Figure 1- EasyScopeIII GUI

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

2Installing EasyScopeIII

EasyScopeIII can be installed on both Windows and Mac OS. This section guides the users through the

process of installing the application on each operating system.

2.1 Windows

2.1.1 Installing the software

Before connecting the instrument to the PC, EasyScopeIII program should be installed. The software can

be downloaded royalty-free from the Connective Peripherals website:

https://www.connectiveperipherals.com/products/usb-instruments/usb-oscilloscope/ds60m10.html

Start the installation by double-clicking the installation package. The following screen will appear.

Figure 2- Setup Wizard - Welcome

Click on the “Next” button to bring the License Agreement screen.

Figure 3- Setup Wizard –License Agreement

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

If you agree with the terms and conditions of the Licence Agreement, click on “I Agree” button, else

click on “Cancel” button. Agreeing on the terms and conditions will bring to the following screen.

Figure 4- Setup Wizard –Installation Location

Select the directory where you wish to install the EasyScopeIII software. A default directory is shown on

the screen. Click the “Install” button to continue the installation process.

Figure 5- Setup Wizard –Installation Progress

As shown above, a progress screen will appear as the files are being installed. Installation may take few

seconds. Upon successful installation, the following screen will appear.

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

Figure 6- Setup Wizard –Installation Complete

2.1.2 Installing the USB Driver

Before using EasyScopeIII the USB driver needs to be installed. This is done by plugging the instrument

into a spare USB port on the PC. The instrument should be plugged into a USB hub port of your PC or

alternatively, a self-powered USB hub (one that has its own power supply).

If this is the first time that the instrument has been plugged in, Windows will request the USB drivers for

your product and will display a Found New Hardware Wizard dialog box. The example below is for

Windows Vista but the procedure is very similar for other Windows versions.

Connect the instrument to a spare USB port on the PC or self-powered hub. The following screen will

appear to begin guiding you through the driver installation.

Figure 7- New Hardware Found UI

Select “Locate and install driver software (recommended)”. Wait for few minutes for the device

driver to be installed. If it’s successful, the following popup will appear."

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

2.2 Mac OS

The USB driver for Mac OS is embedded within the software. As a result, no separate installation for the

driver is needed.

To install EasyScopeIII on Mac OS, the following steps should be followed. The example below is for Mac

OS X Mountain Lion but the procedure should be very similar for other Mac OS versions.

By default, MAC OS may not allow unsigned third-party applications to be installed. In order to overcome

this restriction, the security settings need to be changed.

Click on the Apple icon in the top left corner of the screen and choose System Preferences.

Next, click on Security & Privacy icon.

Figure 8- System Preference Window

To edit the security settings, click the padlock icon in the bottom left of the window.

Figure 9- Security & Privacy Window

The Mac credentials will need to be confirmed before the settings can be changed, enter them and hit

Unlock.

EasyScopeIII for DS60M10 User Guide

Version 1.3

Document Reference No.: CP_000037 Clearance No.: CP#027

Figure 10- System Preference Window –Unlock screen

On the following screen, under the options for "Allow applications downloaded from", click on the

"Anywhere" radio button. Upon clicking, a confirmation window will be displayed, click on "Allow From

Anywhere".

Figure 11- Security & Privacy Window

After the security settings have been changed, EasyScopeIII can be installed on the Mac. Download the

royalty-free installer EasyScopelll.dmg from the Connective Peripherals website:

https://www.connectiveperipherals.com/products/usb-instruments/usb-oscilloscope/ds60m10.html

After the download is completed, double click on the file to unpack it.

Indice

Altri manuali Connective Peripherals Strumento di misura

Connective Peripherals

Connective Peripherals DS1M12 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente