Creality HALOT-ONE PLUS Manuale utente

3D Printer User Manual

V1.0

HALOT-ONE PLUS

Create reality，achieve dreams

HALOT-ONE PLUS

Dear Consumers,

Thank you for choosing our products.For the best experience,please read the instructions before operating the Printer. Our

teams are always ready to render you the best services. Please contact us via the phone number or e-mail address provided

at the end when you encounter any problem with the Printer.

For a better experience in using our product, you can also access how to use the printer in the following ways:

View the accompanied instructions and videos in the U disk.

Visit our oﬃcial website www.creality.com to ﬁnd relevant software/hardware information,contact details and operation and

maintenance instructions.

Firmware/Software Downloads and Upgrades

The product has access to both LycheeSlicer and CHITUBOX. WIFI printing and access to the Creative Cloud are under development.

Download the ﬁrmware and HALOT BOX slicing software at: https://www.creality.com

Download the CHITUBOX slicing software at: https://www.chitubox.com

Download the LycheeSlicer slicing software at: https://lychee.mango3d.io

Slicing software supported：

NOTES

Do not use the printer any way other than described to avoid personal injury or property damage.

Do not place the printer near any heat source or ﬂammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.

Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.

Please use recommended resin in case damage to machine.

Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.

Please do not open the plastic cover during usage, otherwise the printing will be interrupted.

Do not wear cotton gloves when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.

Please wait after the print is ﬁnished. please wear gloves to take out the print tools.

Children under 10 years should not use the printer without supervision.

Tips Do not plug or unplug the power cord when power on.

Clean the printer frequently. Always turn the power oﬀ when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material oﬀ the frame,

guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.

Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety

obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any violators' legal liability under any.

Contents

Equipment Introduction 01-01

Equipment Parameters 02-02

Parts List 03-03

04-05

11-16

06-10

17-17

18-18

Assemble the 3D Printer

Use the 3D Printer

Troubleshooting

Print Method

Wiring Connection

19-19

FCC Statement

20-20

IC Cautiont

1. Equipment Introduction

Hexalobular socket screw

Leveling screw

Platform plate

Resin vat

Air ﬁlter

Power receptacle

Power switch

USB port

Touch screen

Limit sensor

Resin vat ﬁxing screw

Model Name HALOT-ONE PLUS

172*102*160mm (length*width * height)

4320*2560

0.04mm

1-4S/ layer

0.01-0.2mm

236*243*418 mm

310*300*530mm

8.6KG

USB Disk，Creality Cloud App, Creality Cloud Online, WiFi Print

中文(简/繁)/ English/ Español/ Deutsche/ Français/ Pусский/ Português/ Italiano/ Türk/Nederlands/Polskie/日本語/한국어

Win7/Win8/Win 10 64bit, Mac system(32-bit is not supported)

Common rigid photosensitive ,Standard resin ,High hardness ,High toughness ,Dental model resin

Integral Light Source(wavelength 405nm)

100-240V~,50/60Hz

100WRated Power

Machine Size

Package Size

Net Weight

Compatible Resin

Machine Language

Gross Weight

Print Method

Slicing Software Operation System

Build Size

XY Axis Resolution

Touch Screen

Light Source Type

Rated Voltage

XY Axis Accuracy

Print Speed

Layer Thickness

Basic Parameters

5 inch touch screen

6.8KG

2. Equipment parameters

3. Parts Content List

Tool list

Print platform x 1 Resin vat x 1 3D printer x 1

Tips: the above accessories are for reference only lease refer to the physical accessories!

U disk x 1 Paper funnel x 2

Power cable x 1

Release ﬁlm x 1

5Metal blade x 1

Screwdrivers x 1set

7Plastic blade x 1 8Calibration card x 1

9Tray ﬁxing screw x 2

4. Assemble the 3D Printer

Take out the resin vovt align the two tray ﬁxing screws with the corresponding holes and tighten them to ﬁx. (as the picture shows)

Resin vat x 1

Tray ﬁxing screw x 2

4. Assemble the 3D Printer

Machine body x 1

Plastic Upper cover x 1

Note: put the upper cover on the machine body and the installation is completed.

5. Interface Information

Note: Check whether the light source is normal The UI interfaceis only for reference , the actual UI.

Settings

Altri manuali per HALOT-ONE PLUS

Indice

Altri manuali Creality Stampante 3D

Creality

Creality CR-10S Pro Manuale utente

Creality

Creality CR-10 Series Manuale utente

Creality

Creality K1C Manuale utente

Creality

Creality Ender-5 Plus Manuale utente

Creality

Creality CREALITY BOX Manuale utente

Creality

Creality K1 Max Manuale utente

Creality

Creality Spider Manuale utente

Creality

Creality CR-10 Series Manuale utente

Creality

Creality Sermoon V1 Manuale utente

Creality

Creality CR-10 S5 Manuale utente

Creality

Creality CR-6 Max Manuale utente

Creality

Creality CR-M4 Manuale utente

Creality

Creality HALOT-MAX Manuale utente

Creality

Creality HALOT-ONE Manuale utente

Creality

Creality LD-002R Manuale utente

Creality

Creality HALOT-ONE PLUS Manuale utente

Creality

Creality Ender-3 Manuale

Creality

Creality CR-10 Smart Pro Manuale utente

Creality

Creality Halot-Sky Manuale utente

Creality

Creality Ender-6 Manuale utente

Creality

Creality 3D Pad Manuale utente

Creality

Creality CR-10S Pro Manuale utente

Creality

Creality CR-X Scheda tecnica

Creality

Creality CR-Laser Falcon Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente