Critical Environment Technologies YES IMS Manuale utente
Operation Manual
www.critical-environment.com
YES IMS9-Channel IAQ Monitor
Rev. D | 2015.11
2 © 2015 All rights reserved. Data subject to change without notice.
YES IMS - Operation Manual Rev. D | 2015.04
TABLE OF CONTENTS
1 POLICIES.................................................................................................................. 4
1.1 Important Note..............................................................................................................4
1.2Warranty Policy..............................................................................................................5
1.3 Service Policy.................................................................................................................5
1.4 Copyrights......................................................................................................................6
1.5 Disclaimer......................................................................................................................6
1.6 Revisions........................................................................................................................7
2 INTRODUCTION ..................................................................................................... 8
2.1 General Description .......................................................................................................8
2.2 Key Features...................................................................................................................9
3 INSTRUMENT SPECIFICATIONS ........................................................................... 9
3.1Technical Specications..................................................................................................9
3.2 Enclosure Dimensions..................................................................................................11
4 SENSOR SPECIFICATIONS...................................................................................12
4.1 Sensor Conguration Notes..........................................................................................12
4.2 Sensor Specications ...................................................................................................12
5 FEATURES..............................................................................................................24
5.1 Front & Side Exterior Enclosure....................................................................................24
5.3 RearView (Wall Mount Version)...................................................................................25
6 OPERATION...........................................................................................................26
6.1 Overview .....................................................................................................................26
6.2 Switching Instrument On & O....................................................................................26
6.2.1 Sensor Warm-Up............................................................................................................26
6.3 Understanding the LCD Display....................................................................................26
6.3.1 Sensor Displays..............................................................................................................26
6.3.2 Alarm Level Display .......................................................................................................27
6.3.3 Date /Time Display........................................................................................................27
6.3.4 Status Message Display..................................................................................................27
© 2015 All rights reserved. Data subject to change without notice. 3
Rev. D | 2015.04 YES-IMS - Operation Manual
6.4 Installing the USB Driver..............................................................................................27
6.4.1Windows XP andWindows 7..........................................................................................27
6.4.2Windows 8.....................................................................................................................28
6.4.3Windows 8.1..................................................................................................................34
6.5 IMSViewer Application................................................................................................45
6.5.1 Overview .......................................................................................................................45
6.5.2 Sensors Tab....................................................................................................................45
6.5.3 DatalogTab....................................................................................................................45
6.5.4 Wi-Fi Settings Tab ..........................................................................................................45
6.5.5 Connecting to theYES IMS.............................................................................................45
6.5.6 Datalog Settings............................................................................................................46
6.5.7Wi-Fi Settings ................................................................................................................48
6.5.8 Graphing Datalogs.........................................................................................................49
6.6Wi-FiWeb Interface......................................................................................................50
6.6.1 Getting Started .............................................................................................................50
6.6.2Wireless Connection Methods and Modes .....................................................................52
6.6.3 Detailed Description of Wi-Fi Operation.........................................................................53
7 FUNCTION.............................................................................................................54
7.1 Calibration ...................................................................................................................54
7.2 Datalog........................................................................................................................54
8 INFORMATION RECORDING OPERATIONS ......................................................54
9 MAINTENANCE.....................................................................................................55
10 TROUBLE SHOOTING ........................................................................................55
4 © 2015 All rights reserved. Data subject to change without notice.
YES IMS - Operation Manual Rev. D | 2015.04
1 POLICIES
1.1 Important Note
Read and understand this manual prior to using this instrument. Carefully read the warranty
policy, service policy, notices, disclaimers and revisions on the following pages.
This instrument should be inspected and calibrated regularly by a qualied and factory trained
technician. For more information, refer to Maintenance & Calibration sections of this manual.
This instrument has not been designed to be intrinsically safe. For your safety, do not use it in
classied hazardous areas (explosion-rated environments).
INSTRUMENT SERIAL NUMBER:
__________________________________________________________
PURCHASE DATE:
__________________________________________________________
PURCHASED FROM:
__________________________________________________________
© 2015 All rights reserved. Data subject to change without notice. 5
Rev. D | 2015.04 YES-IMS - Operation Manual
1.2 Warranty Policy
Critical EnvironmentTechnologies Canada Inc. (CETCI), also referred to as the manufacturer,
warrants this instrument, (excluding sensors, battery packs, batteries, pumps and lters) to be
free from defects in materials and workmanship for a period of two years from the
date of purchase from our facility. The sensors have a warranty period of one year
on a pro-rated basis from the date of purchase from our facility. If the product should
become defective within this warranty period, we will repair or replace it at our discretion.
The warranty status may be aected if the instrument has not been used and maintained as
per the instructions in this manual or has been abused, damaged, or modied in any way. This
instrument is only to be used for the purposes stated herein.The manufacturer is not liable for
auxiliary interfaced equipment or consequential damage.
Due to ongoing research, development, and product testing, the manufacturer reserves the
right to change specications without notice.The information contained herein is based on data
considered accurate. However, no warranty is expressed or implied regarding the accuracy of this
data.
All goods must be shipped to the manufacturer by prepaid freight. All returned goods must be
pre-authorized by obtaining a Returned Merchandise Authorization (RMA) number. Contact the
manufacturer for an RMA number and the procedures required for product transport.
1.3 Service Policy
CETCI maintains an instrument service facility at the factory. Some CETCI distributors / agents
may also have repair facilities; however, CETCI assumes no liability for service performed by
anyone other than CETCI personnel.
Repairs are warranted for 90 days after date of shipment (sensors have individual warranties).
Should your instrument require non-warranty repair, you may contact the distributor from
whom it was purchased or you may contact CETCI directly.
Prior to shipping equipment to CETCI, contact our oce for a Returned Merchandise
Authorization (RMA) number. All returned goods must be accompanied with an RMA number.
6 © 2015 All rights reserved. Data subject to change without notice.
YES IMS - Operation Manual Rev. D | 2015.04
If CETCI is to do the repair work, you may send the instrument, prepaid, to:
Attention: Service Department
Critical Environment Technologies Canada Inc.
Unit 145, 7391 Vantage Way
Delta, BC, V4G 1M3
Always include your Returned Merchandise Authorization (RMA) number, address, telephone
number, contact name, shipping / billing information, and a description of the defect as
you perceive it. You will be contacted with a cost estimate for expected repairs, prior to the
performance of any service work.
For liability reasons, CETCI has a policy of performing all needed repairs to restore the instrument
to full operating condition.
Pack the equipment well (in its original packing if possible), as we cannot be held responsible for
any damage incurred during shipping to our facility.
1.4 Copyrights
This manual is subject to copyright protection; all rights are reserved. Under international and
domestic copyright laws, this manual may not be copied or translated, in whole or in part, in any
manner or format, without the written permission of CETCI.
All software which CETCI utilizes and / or distributes holds a proprietary interest and is also
subject to copyright protection and all rights are reserved. No party may use or copy such
software in any manner or format, except to the extent that CETCI grants them a license to do
so. IF THIS SOFTWARE IS BEING LOADED ONTO MORETHAN ONE COMPUTER, EXTRA SOFTWARE
LICENSES MUST BE PURCHASED.
1.5 Disclaimer
Under no circumstances will CETCI be liable for any claims, losses or damages resulting from or
arising out of the repair or modication of this equipment by a party other than CETCI service
technicians, or by operation or use of the equipment other than in accordance with the printed
instructions contained within this manual or if the equipment has been improperly maintained
or subjected to neglect or accident. Any of the forgoing will void the warranty.
© 2015 All rights reserved. Data subject to change without notice. 7
Rev. D | 2015.04 YES-IMS - Operation Manual
1.6 Revisions
This manual was written and published by CETCI. The manufacturer makes no warranty or
representation, expressed or implied including any warranty of merchantability or tness for
purpose, with respect to this manual.
All information contained in this manual is believed to be true and accurate at the time
of printing. However, as part of its continuing eorts to improve its products and their
documentation, the manufacturer reserves the right to make changes at any time without
notice. Revised copies of this manual can be obtained by contacting CETCI or visiting www.
critical-environment.com.
Should you detect any error or omission in this manual, please contact CETCI at the following
address:
Critical Environment Technologies Canada Inc.
Unit 145, 7391Vantage Way, Delta, BC, V4G 1M3, Canada
Toll Free: +1.877.940.8741
Telephone: +1.604.940.8741
Fax: +1.604.940.8745
Email: marketing@cetci.com
Website: www.critical-environment.com
In no event will CETCI, its ocers or employees be liable for any direct, special, incidental
or consequential damages resulting from any defect in any manual, even if advised of the
possibility of such damages.
8 © 2015 All rights reserved. Data subject to change without notice.
YES IMS - Operation Manual Rev. D | 2015.04
2 INTRODUCTION
2.1 General Description
Thank you for purchasing ourYES IMS multi-sensor, indoor air quality monitor (IAQ) and
recording instrument.
TheYES IMS is a self-contained, IAQ Intelligent Monitoring System (IMS) with a nine channel
sensor capacity, two dedicated to one internal relative humidity (RH) and one temperature
sensor and the remaining congurable up to seven gas sensors.
Options include a xed wall mount model or a desktop model with a wide range of sensors to
choose from, including particulate, electrochemical, solid state combustible, infrared, and TVOCs
(solid state and PID).The xed wall mount model can be permanently wired with 24VAC or DC
and the desktop model comes with a 12VDC wall adapter. Both models allow for around the
clock continuous monitoring and datalogging.
YES IMS has an internal logging memory that will store over two month’s worth of readings
when logging once per minute. Data is saved in a Microsoft® Excel friendly CSV format and can
be extracted from the unit with a standard USB connection or Wi-Fi interface. Users can then
analyze and graph data using CETCI’s proprietary datalogging software, IMSViewer.
An example of a common IAQ package would be temperature, RH, CO, CO2, particulates and
TVOCs.
If after reading through the manual, you have any questions, please do not hesitate to contact
our Service Department for technical support.
© 2015 All rights reserved. Data subject to change without notice. 9
Rev. D | 2015.04 YES-IMS - Operation Manual
2.2 Key Features
• 9 channel capacity
• Standard LCD display
• Wide range of sensors available to choose from, including particulate, electrochemical, solid
state, infrared &TVOCs
• Light weight desktop model or xed wall mount model
• High capacity datalogging capability
• Proprietary IMS Viewer datalogging software included
• Optional Wi-Fi module
• RoHS compliant circuit boards
3 INSTRUMENT SPECIFICATIONS
3.1 Technical Specications
GAS TYPE
Electrochemical
Ammonia (NH3), Carbon Monoxide (CO), Chlorine (Cl2), Ethylene (C2H4),
Ethylene Oxide (C2H4O), Formaldehyde (CH2O), Nitrogen Dioxide (NO2),
Oxygen (O2), Ozone (O3), Sulphur Dioxide (SO2)
Infrared
Carbon Dioxide (CO2)
Combustible Gas (solid state)
Hydrogen (H2), Methane (CH4), Propane (C3H8), etc.
Particulates (convection)
TVOCs (solid state & PID)
MECHANICAL
Enclosure General Purpose PVC / ABS
Weight 600 g (1.4 lb)
Size 9.2”x 5.3”x 2.4”(233 mm x 133 mm x 60 mm)
10 © 2015 All rights reserved. Data subject to change without notice.
YES IMS - Operation Manual Rev. D | 2015.04
ELECTRICAL
Power Requirement
Desktop Model
Wall Mount Model
Plug-in, 12VDC, Class III, 2 A DC max. wall adapter
24VAC or DC, 500 mA max. capacity
Sampling Diusion
Memory 8 MB
Calibration Using the PC application software available only to authorized
distributors
Information Recording User congurable through PC application software
Circuit Microprocessor
Communication Miniature USB port
USER INTERFACE
Display Full Color LCD display
ENVIRONMENTAL (sensor dependent)
OperatingTemperature 5°C to 50°C (41°F to 122°F)
Operating Humidity 5 - 95% RH non-condensing
StorageTemperature -20°C to 60°C (-4°F to 140°F)
Storage Humidity 0 - 99% RH non-condensing
CERTIFICATION
CE Pending
Indice
Altri manuali Critical Environment Technologies Strumento di misura
